diff --git a/src/GLABIOS.ASM b/src/GLABIOS.ASM
index 8598cee..963c91b 100755
--- a/src/GLABIOS.ASM
+++ b/src/GLABIOS.ASM
@@ -531,6 +531,8 @@ TURBO_TYPE		=	TURBO_NONE		; disable Turbo features
 SW1_VID		=	10b			; SW1 5/6 ON/OFF Video Type CGA 80
 SW1_FLP		=	1			; SW1 7/8 Max # of floppy drives (0-3)
 							;  0-based: 0=1 drive, 1=2 drives, etc
+POST_TEST_SEEK    =     0                 ; disabe floppy drive seek test
+CGA_SNOW_REMOVE   =     0                 ; disable CGA snow removal
 	ENDIF
 
 	IF ARCH_TYPE EQ ARCH_EMU
@@ -6235,8 +6237,6 @@ INT_14_1 PROC
 	ADD	DX, COM1_MCR-COM1_DATA		; DX = 3FC/2FC - Modem Control Register
 	MOV	AL, MASK RTS OR MASK DTR	; activate DTR & RTS
 	OUT	DX, AL				; set DTR or RTS
-	INC	DX
-	INC	DX 					; DX = 3FE - Modem Status Register
 	MOV	BX, DBW <MASK THRE OR MASK LBI, MASK MDSR> ; BH = line (THRE)
 							;  BL = modem (DSR/CTS)
 	CALL	INT_14_POLL 			; poll both registers, AH = status
@@ -6269,11 +6269,10 @@ INT_14_2 PROC
 	ADD	DX, COM1_MCR-COM1_DATA		; DX = 3FC/2FC - Modem Control Register
 	MOV	AL, MASK DTR			; activate DTR
 	OUT	DX, AL				; set DTR
-	INC	DX
-	INC	DX 					; DX = 3FE/2FE - Modem Status Register
 	MOV	BX, DBW <MASK MDSR, MASK LDR>	; BH = modem (DSR), BL = line (data ready)
 	CALL	INT_14_POLL 			; poll both registers, AH = status
 	POP	DX 					; restore base port
+      JNZ   INT_14_RW_ERR                 ; Jump if port timeout
 	AND	AH, MASK LBI OR MASK LFE OR MASK LPE OR MASK LOE ; include only 
 							;  error bits in port status
 	IN	AL, DX				; read char from buffer
@@ -6285,7 +6284,7 @@ INT_14_2 ENDP
 ;----------------------------------------------------------------------------;
 ; Input:
 ;	DI = port index (0 based byte)
-; 	DX = 3FE Modem Status Register
+; 	DX = 3FC Modem Status Register
 ;	BL = line status expected masked
 ;	BH = modem status expected masked
 ; Output:
@@ -6296,6 +6295,8 @@ INT_14_2 ENDP
 ; Clobbers: AX, CX
 ;----------------------------------------------------------------------------;
 INT_14_POLL PROC
+	INC	DX
+	INC	DX 				; DX = 3FE/2FE - Modem Status Register
 	CALL	INT_14_POLL_PORT 		; first poll modem status
 	JNZ	INT_14_POLL_RET  		; jump if ZF = 0, timeout or failure occurred
 	XCHG	BH, BL 			; BH = line status
@@ -6318,7 +6319,7 @@ INT_14_POLL_LOOP:
 	JZ	INT_14_POLL_DONE
 	LOOP	INT_14_POLL_LOOP		; poll port 65,535 * timeout times
 	DEC	SI 				;
-	JNZ	INT_14_POLL_LOOP		; Jump if timeout not expired
+	JNS	INT_14_POLL_LOOP		; Jump if timeout not expired
 INT_14_POLL_DONE:
 	POP	SI
 INT_14_POLL_RET: