Call Flow Control Issabel 4 and 5

[tbagwell]

In the last version of 4 and the Alpha of 5
If you have call flow control setup.
And you change override on one of them. It will change all call flow control to override just not that one that you wanted.

[asternic]

Hi, thanks for the feedback,

I did some test on a freshly installed 2.12.0 version. Created two flows named "uno" and "dos"

Checking the ASTDB both appear as NOT_INUSE , DAY (correctly)

Then I set override for the 2nd one ("dos")

And the ASTDB is changed correctly:

Did the same with "uno" a bunch of times, toggling override/normal, and the ASTDB was ok every time.

Let me know how can I reproduce the issue or if I am checking something different than you describe?

[tbagwell]

I did this with the last version of 4 and 5. Total new installed..
I would make one called test 1, test 2 and test 3.
I would manual change the override from the call flow GUI for one of them.. It would then show them all as red and in override. But then I look at the core show hints.. They will all show as idle and not in inuse

*281@app-daynight-to: Custom:DAYNIGHT1 State:Idle Presence:not_set Watchers 0
*280@app-daynight-to: Custom:DAYNIGHT0 State:Idle Presence:not_set Watchers 0
*282@app-daynight-to: Custom:DAYNIGHT2 State:Idle Presence:not_set Watchers 0

[root@issabel ~]# asterisk -rx "database show" | grep DAY
/DAYNIGHT/C : DAY
[root@issabel ~]#

It seem like it isn't even building the code right or something else? But I have even taken the older code from the image from 2020 that does seem to work from the start.. Copy all of the code folder over to the new install and it seem to fixes the problem.. Not sure what happening about this.

[asternic]

Please check if your issabelPBX is version 2.11.49 or 2.12.0. My testing was done in 2.12.0 included in Issabel5 netinstalls and upcoming beta iso (not out yet).

[tbagwell]

I did this with the ISO files not a netinstall.
It seem do it with the [issabel4-BETA-USB-DVD-x86_64-20210714.iso]
and [issabel5-ALPHA1-USB-DVD-x86_64-20230615.iso]

I can get the same time bug in beta usb dvd of 2021 also. even updated too.

I download and install from the issabel5 alpha.. And looking at the module. It come back as
[IssabelPBX Framework] 2.11.0.49 Issabel Foundation Enabled

Everything there still show 2.11 under modules. Still total has the 2.11 layout and menus.. If they change in 2.12