Data-ServiceRestoration/data_format.txt at master · JPMarquesEE/Data-ServiceRestoration · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
# Comments lines begin with the symbol #

BEGIN	SNAME
# Test system name
END	-999

BEGIN	SBASE [kVA]
# Power base value in kVA
END	-999

BEGIN	COSTS
# Penalty constant and power losses cost ($/MWh)
END	-999

BEGIN	BUSES
# ID;BNAME;VBASE [kV]; VMIN [PU]; VMAX [PU]
END	-999

BEGIN	FAULT_SCENARIO
# FAULT BUS ID
# all_1 -- Test fault scenarios for each section
# Bus id (in each line) -- Creates a scenario wherein the faults are located in the specified buses
END	-999

BEGIN	BRANCHES
# ID;FID;TID;DEVICE TYPE
# LINE - R [OHM], X[OHM], IMAX [A]
# SWLINE - R [OHM], X[OHM], SWITCHING COST [$/op], IMAX [A], OPERATION TIME [h], INITIAL STATUS [0 - opened / 1 - closed]
END	-999

BEGIN	SHUNT_DEVICES
#BUS_ID;TYPE;SHUNT_PROPERTIES
# SOURCE - Vnom [kV]
# PQLOAD - P [kW]; Q [kVAR]; PENALTY COST[$/h]; NON-SUPPLIED COST [$/MWh]; curve_name(optional)
# SW_PQLOAD - P [kW]; Q [kVAR]; PENALTY COST[$/h]; NON-SUPPLIED COST [$/MWh]; SWITCHING COST [$/op]; MAX. SWITCHING OPERATION [un.]; curve_name(optional)
# ESS - MIN. ACTIVE POWER [kW]; MAX. ACTIVE POWER [kW]; MIN. POWER RATE INJECTION [kW/s]; MAX. POWER RATE INJECTION [kW/s]; MIN. ENERGY [MWh]; MAX. ENERGY[MWh]; STORED ENERGY [MWh]; EFFICIENCY [pu]; AUTO DISCHARGE RATE [pu/h]
# DSPHDG - MIN. ACTIVE POWER [kW]; MAX. ACTIVE POWER [kW]; MIN. REACTIVE POWER [kVAr]; MAX. REACTIVE POWER [kVAr]; MAX. APPARENT POWER [kVA]; MIN. POWER RATE INJECTION [kW/s]; MAX. POWER RATE INJECTION [kW/s];; POWER GEN. COST [$/MWh]
# DSPHDG_BS - DG MODE [1 - Conventional DG/ 0 - Black-start mode], NOMINAL VOLT. [kV]; MIN. ACTIVE POWER [kW]; MAX. ACTIVE POWER [kW]; MIN. REACTIVE POWER [kVAr]; MAX. REACTIVE POWER [kVAr]; MAX. APPARENT POWER [kVA]; MIN. POWER RATE INJECTION [kW/s]; MAX. POWER RATE INJECTION [kW/s]; POWER GEN. COST [$/MWh]; START UP TIME [h]
# NDSPHDG - ACTIVE POWER RATED [kW]; MIN. POWER FACTOR; MAX. POWER FACTOR; APPARENT POWER RATED [kVA]; POWER GEN. COST [$/MWh]; curve_name(optional)
END	-999