Manually specify the port

[WayneKeenan]

The macOS port list function doesn't find my FTDI based Sparkfun ESP32 Thing USB CDC/serial port. Obviously it would be nice to fix the underlying enum issue, but instead of any potential wack'a'mole-ing...

It would be helpful to be able to manually specify a port (as a command line arg or in the GUI) instead of only allowing selection from a pre-populated list.

[matteocarnelos]

Hey @WayneKeenan, I solved this issue by manually building the latest version of the application hosted in this repo:

$ brew install wxwidgets
$ git clone https://github.com/PaulStoffregen/MotionCal
$ cd MotionCal
[comment `OS = LINUX` and uncomment `OS = MACOSX_CLANG` in `Makefile`]
$ make

And finally you can open MotionCal.app.

Here's the version I built: MotionCal.app.zip

[WayneKeenan]

Thanks. I'll give it a go at some point, just that I can't remember what I was using this for now lol. (Will have to check notes / projects)

[IanBUK]

Hey @WayneKeenan, I solved this issue by manually building the latest version of the application hosted in this repo:

$ brew install wxwidgets
$ git clone https://github.com/PaulStoffregen/MotionCal
$ cd MotionCal
[comment `OS = LINUX` and uncomment `OS = MACOSX_CLANG` in `Makefile`]
$ make

And finally you can open MotionCal.app.

Here's the version I built: MotionCal.app.zip

On Monterey, M1 MacBook Air, I get the following:

Warning: No available formula with the name "wxwidgets".
==> Searching for similarly named formulae...
Error: No similarly named formulae found.
==> Searching for a previously deleted formula (in the last month)...
Error: No previously deleted formula found.
==> Searching taps on GitHub...
Error: No formulae found in taps.```

[IeiuniumLux]

I get the same errors like @IanBUK, is OSX Monterey supported?

[matteocarnelos]

@IeiuniumLux it should be supported (see here). It seems that the error is related to the homebrew installation, this StackOverflow question might help.

[IeiuniumLux]

@matteocarnelos,

I have wxwidgets installed, but the problem is that it doesn't list the port for the device connected to the Mac.

[SouthernAtHeart]

I too am trying to use the MotionCal software or my MacBook, and it doesn't list any ports, as in the above photo...

[mhaberler]

I just tried on a M1 Macbook with Ventura 13.3.1

brew install wxwidgets
version I got: wxwidgets 3.2.2.1

add -arch arm64 to CFLAGS and build for OS = MACOSX_CLANG

make
open MotionCal.app

works for me!

diff --git a/Makefile b/Makefile
index 83a8d7a..a41dbb8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
-OS = LINUX
+#OS = LINUX
 #OS = MACOSX
-#OS = MACOSX_CLANG
+OS = MACOSX_CLANG
 #OS = WINDOWS

 ifeq ($(OS), LINUX)
@@ -32,10 +32,10 @@ else ifeq ($(OS), MACOSX_CLANG)
 ALL = MotionCal.app
 CC = /usr/bin/clang
 CXX = /usr/bin/clang++
-CFLAGS = -O2 -Wall -DMACOSX
+CFLAGS = -O2 -Wall -DMACOSX -arch arm64
 WXCONFIG = wx-config
 WXFLAGS = `$(WXCONFIG) --cppflags`
-CXXFLAGS = $(CFLAGS) `$(WXCONFIG) --cppflags`
+CXXFLAGS = $(CFLAGS) `$(WXCONFIG) --cppflags`
 SFLAG =
 CLILIBS = -lglut -lGLU -lGL -lm
 VERSION = 0.01

[virtyaluk]

The provided MacOS executable doesn't work for me. Building from the source also didn't help to fix the empty list of ports. Managed to get a working port list on the latest Windows 10, but the app doesn't seem to listen to the data coming from MCU at all. Had to consider an alternative and most importantly working solution - MagCal.

[UnexpectedMaker]

I know it's been a while... I also just had this issue on macOS 14.1.2 on an M2 Max - but I followed @mhaberler 's steps and I re-compiled (with a few errors in the output) but it worked, and I see the ports in the list and I am able to use the tool.

[PipoPL]

I had the same issue but just built the app with @mhaberler 's instructions and it worked ! MacOs Monterrey 12.1.
thank you !

[josephlarralde]

Same here on Ventura 13.5 on a Apple M2 Max, thanks @mhaberler !

[chunghay]

I had the same issue on macOS Sonoma 14.6.1 on a MacBook Pro with Intel core, and @mhaberler's instructions worked!

In case others benefit from a more detailed explanation of the instructions, I listed them below:

Delete any earlier instances of MotionCal.app, e.g. one that was created from the .dmg file

Then in the terminal, run this to get the software for displaying GUIs:

brew install wxwidgets

Continue in the terminal with these commands to get the source code:

cd /Applications
git clone https://github.com/PaulStoffregen/MotionCal.git

In the terminal, go to the created folder:

cd MotionCal
open .

You should see the folder "MotionCal" open in a separate window. Find the file "Makefile" and open it in a text editor. Make the following changes (to get what's in bold) and save the file:

• Comment out the Linus OS row…
  • OS = LINUX --> #OS = LINUX
• Uncomment the MACOSX_CLANG option row…
  • #OS = MACOSX_CLANG --> OS = MACOSX_CLANG
• Add “-arch arm64” at the end of the MACOS CFLAGS row…
  • CFLAGS = -O2 -Wall -DMACOSX --> CFLAGS = -O2 -Wall -DMACOSX -arch arm64

Then in the terminal (you should be in /Applications/MotionCal), compile the code:
make

Now you can open the created app:
open MotionCal.app

[srgg]

Thanks to @mhaberler, I was able to build and run Motion Cal, but with Adafruit reverse TFYT feather connected via type-c, I can not choose '/dev/cu.usbmodem2101', it is shown in the dropdown list, but as soon as I tried to select it, it selects '(none)' :(

UPD: solved, an MCU board discrepancy caused it. ALL works fine now. Thank you to @mhaberler for the detailed instructions!

[2e0wkw]

I cannot make MotionCal on my M1 MacMini running MacOs 15.1.1.
I get:
ld: symbol(s) not found for architecture arm64
clang++: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [MotionCal] Error 1

Eric