[Bug]: Unconnected HT-ATES

[MSD-ctrl]

Groningen_Large_Redundant_ESDL_Supply_only_TPS.txt

Groningen_Large_Redundant_ESDL_TPS_opt.txt
Groningen_Large_Redundant_ESDL_TP_opt.txt
Groningen_Large_Redundant_ESDL_Supply_only.txt

Is there an existing issue for this?

• I have searched the existing issues.

What happened?

I have made an optimization which resulted in the deletion of the connection to the HT-ATES.

Steps to reproduce the problem

1. Validate the network
2. Run an OMOTES optimization

What should have happened?

According to the developer the HT-ATES should have remained connected to the network.

What browsers do you use to access the UI?

Mozilla Firefox

Additional information

The Supply only file was originally done for the TP network only. I could not find the supply only file for the TPS system, so I remade one based on the original file.

[KobusVanRooyen]

@MSD-ctrl just to make sure that I understand correctly. Is Groningen_Large_Redundant_ESDL_Supply_only_TPS.txt (after using the duplicator) used to create Groningen_Large_Redundant_ESDL_TPS_opt.txt?

The reason for asking is because I see a return temperature missing in the carrier for Groningen_Large_Redundant_ESDL_Supply_only_TPS.txt. So I was wondering if you made any other adjustments after using the duplicator?

Can you please attached the file (supply and return network) that is used to create Groningen_Large_Redundant_ESDL_TPS_opt.txt? I want to be sure what the inputs are that you used.

[KobusVanRooyen]

@MSD-ctrl can you please confirm what the State of the HT-ATES is in the esdl file you used. It seems that the state is set to ENABLED. Was this state used in your input esdl file?

[MSD-ctrl]

Hi Kobus, Thank you for your reply. I looked and cannot find the file before optimization for the Groningen_Large_Redundant_ESDL_TPS_opt.txt. I will generate another network based on the Groningen_Large_Redundant_ESDL_Supply_only_TPS.txt. There is currently an internal server error. ***@***.*** Thank you for your help and patience. Best regards, M.S. Diarra (Mariam) Project Energy Engineer ***@***.******@***.***> | +31 (0)6 14 72 52 79 Witteveen+Bos Nieuwe Stationstraat 10 | Postbus 233 | 6811 KS Arnhem +31 (0)570 69 79 11 | www.witteveenbos.com<https://www.witteveenbos.com/> From: KobusVanRooyen ***@***.***> Sent: maandag 12 januari 2026 09:03 To: Project-OMOTES/user_feedback ***@***.***> Cc: Mariam Diarra ***@***.***>; Mention ***@***.***> Subject: Re: [Project-OMOTES/user_feedback] [Bug]: Unconnected HT-ATES (Issue #85) [Image removed by sender.]KobusVanRooyen left a comment (Project-OMOTES/user_feedback#85)<https://urldefense.com/v3/__https:/github.com/Project-OMOTES/user_feedback/issues/85*issuecomment-3737305013__;Iw!!NFFV0PM8bbqw!LRSqKdP6cuAqzp7kjHGfIA6i09u580XLOoFhICcxSnoJw7HOrkdweOcjvusKAkRruy-VcFHooseRUc0nv37OS4XJdZq-a4-_$> @MSD-ctrl<https://urldefense.com/v3/__https:/github.com/MSD-ctrl__;!!NFFV0PM8bbqw!LRSqKdP6cuAqzp7kjHGfIA6i09u580XLOoFhICcxSnoJw7HOrkdweOcjvusKAkRruy-VcFHooseRUc0nv37OS4XJdYV5MeTu$> just to make sure that I understand correctly. Is Groningen_Large_Redundant_ESDL_Supply_only_TPS.txt (after using the duplicator) used to create Groningen_Large_Redundant_ESDL_TPS_opt.txt? The reason for asking is because I see a return temperature missing in the carrier for Groningen_Large_Redundant_ESDL_Supply_only_TPS.txt. So I was wondering if you made any other adjustments after using the duplicator? Can you please attached the file (supply and return network) that is used to create Groningen_Large_Redundant_ESDL_TPS_opt.txt? I want to be sure what the inputs are that you used. - Reply to this email directly, view it on GitHub<https://urldefense.com/v3/__https:/github.com/Project-OMOTES/user_feedback/issues/85*issuecomment-3737305013__;Iw!!NFFV0PM8bbqw!LRSqKdP6cuAqzp7kjHGfIA6i09u580XLOoFhICcxSnoJw7HOrkdweOcjvusKAkRruy-VcFHooseRUc0nv37OS4XJdZq-a4-_$>, or unsubscribe<https://urldefense.com/v3/__https:/github.com/notifications/unsubscribe-auth/B4PKG6DYBF7KY5CCWBFARCL4GNIJ5AVCNFSM6AAAAACRBRMH7GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTOMZXGMYDKMBRGM__;!!NFFV0PM8bbqw!LRSqKdP6cuAqzp7kjHGfIA6i09u580XLOoFhICcxSnoJw7HOrkdweOcjvusKAkRruy-VcFHooseRUc0nv37OS4XJdU3g2DBX$>. You are receiving this because you were mentioned.Message ID: ***@***.***>

…

------------------------------------------------------------------------------------------ DISCLAIMER: This e-mail is strictly confidential and is intended solely for the addressee. It is prohibited for unauthorized persons to utilize the information contained within this e-mail. If you receive this e-mail and you are not the addressee, then please delete it from your system and notify the person who sent it to you. Our company accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing.

------------------------------------------------------------------------------------------ Before printing, think about the environment.

[KobusVanRooyen]

@MSD-ctrl we did try to investigate this matter. We tried to use the input esdl files provided, but these files still did not have all the required input settings needed to be able to start an optimization. So the only way for use to investigate this would be get the original input file you used. Since this is not possible, I think it is better that we close this Issue for now @samvanderzwan. @MSD-ctrl if this happens again in the future please let us know. Thanks for the input so far