From 20498a534750558cef8c25808f894b7f038c09c4 Mon Sep 17 00:00:00 2001 From: Psych0h3ad <41975091+Psych0h3ad@users.noreply.github.com> Date: Thu, 1 Oct 2026 22:58:44 +0900 Subject: [PATCH] Add KARAKSA-F DX filament preset for MAX4 0.4 mm --- resources/profiles/X 4 Series.json | 8 +++ ...-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json | 10 ++++ ...i KARAKSA-F PA-CNF DX @X-Max 4-Series.json | 60 +++++++++++++++++++ 3 files changed, 78 insertions(+) create mode 100644 resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json create mode 100644 resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series.json diff --git a/resources/profiles/X 4 Series.json b/resources/profiles/X 4 Series.json index 0b590d13..e2fe6c4b 100644 --- a/resources/profiles/X 4 Series.json +++ b/resources/profiles/X 4 Series.json @@ -204,6 +204,14 @@ "name": "fdm_filament_common", "sub_path": "filament/fdm_filament_common.json" }, + { + "name": "AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series", + "sub_path": "filament/AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series.json" + }, + { + "name": "AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle", + "sub_path": "filament/AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json" + }, { "name": "Generic ABS@X4", "sub_path": "filament/Generic ABS.json" diff --git a/resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json b/resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json new file mode 100644 index 00000000..ff4c3da7 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFNAKDX1", + "setting_id": "GFSNAKDX41", + "name": "AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series", + "compatible_printers": ["X-Max 4 0.4 nozzle"] +} diff --git a/resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series.json b/resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series.json new file mode 100644 index 00000000..f84f3024 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "filament_id": "GFNAKDX1", + "setting_id": "GFSNAKDX40", + "name": "AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "close_fan_the_first_x_layers": ["3"], + "complete_print_exhaust_fan_speed": ["70"], + "cool_plate_temp": ["0"], + "cool_plate_temp_initial_layer": ["0"], + "default_filament_colour": [""], + "during_print_exhaust_fan_speed": ["70"], + "enable_overhang_bridge_fan": ["1"], + "enable_pressure_advance": ["0"], + "eng_plate_temp": ["65"], + "eng_plate_temp_initial_layer": ["65"], + "fan_cooling_layer_time": ["5"], + "fan_max_speed": ["30"], + "fan_min_speed": ["10"], + "filament_adaptive_volumetric_speed": ["0"], + "filament_adhesiveness_category": ["400"], + "filament_change_length": ["10"], + "filament_cooling_before_tower": ["10"], + "filament_density": ["1.16"], + "filament_end_gcode": ["; No material-specific end commands."], + "filament_extruder_variant": ["Direct Drive Standard"], + "filament_flow_ratio": ["0.96"], + "filament_is_support": ["0"], + "filament_long_retractions_when_cut": ["nil"], + "filament_max_volumetric_speed": ["12"], + "filament_notes": "Asahi Kasei KARAKSA-F PA-CNF DX (DX205): cellulose nanofiber reinforced polyamide. PA6-CF is retained only as the QIDI printer/BOX compatibility category; this product contains CNF, not carbon fiber. MAX4 0.4 mm profile: nozzle 275 C, PEI/hot/engineering bed 65 C, flow ratio 0.96, conservative volumetric limit 12 mm3/s. Based on a user-supplied profile and a physical MAX4 flow test with QIDI BOX; 12 mm3/s is a conservative selected value, not a measured failure threshold or a manufacturer-certified flow rate. Nozzle range 260-280 C follows manufacturer guidance and bounds the HOTENDTEMP parameter in BOX_PRINT_START. Density 1.16 g/cm3 and diameter 1.75 mm follow the publicly downloadable DX205 TDS CNFF-TD002-1. No required nozzle hardness; active chamber/BOX heating and pressure advance override are off. Pre-dry the filament and use PA-compatible bed adhesive. Other nozzle sizes and printer models require separate calibration. Manufacturer information: https://www.asahi-kasei.co.jp/karaksa/products/pa-filament.html Public TDS: https://filament2print.com/en/index.php?controller=attachment&id_attachment=3734", + "filament_printable": ["3"], + "filament_retraction_distances_when_cut": ["nil"], + "filament_shrink": ["100%"], + "filament_start_gcode": ["; QIDI Studio: fan and chamber control are handled by the selected printer profile."], + "filament_type": ["PA6-CF"], + "filament_vendor": ["AsahiKasei"], + "first_x_layer_fan_speed": ["0"], + "full_fan_speed_layer": ["2"], + "hot_plate_temp": ["65"], + "hot_plate_temp_initial_layer": ["65"], + "ironing_fan_speed": ["-1"], + "long_retractions_when_ec": ["0"], + "nozzle_temperature": ["275"], + "nozzle_temperature_initial_layer": ["275"], + "nozzle_temperature_range_high": ["280"], + "nozzle_temperature_range_low": ["260"], + "overhang_fan_threshold": ["0%"], + "pressure_advance": ["0.02"], + "required_nozzle_HRC": ["0"], + "retraction_distances_when_ec": ["0"], + "slow_down_layer_time": ["2"], + "supertack_plate_temp": ["0"], + "supertack_plate_temp_initial_layer": ["0"], + "textured_plate_temp": ["65"], + "textured_plate_temp_initial_layer": ["65"], + "volumetric_speed_coefficients": ["0 0 0 0 0 0"] +}