Is there a CPL file to have them ordered pre populated with the smt parts?

[ChuxtyGT]

Sorry if this isn't allowed. I just want to build a few for the 3 xboxes I have and wanted to know if they can be ordered with everything already mounted on the pcb except of course the arduinos. I am capable of soldering the parts but was wondering if that's possible? Unless I missed the CPL file somewhere? Thanks for any info. This is such a great project!

[Ryzee119]

There currently isn't anything like that setup. The easiest way to order at the moment is https://kitspace.org/boards/github.com/ryzee119/ogx360

If someone wants to create such a thing and raise a PR that would be welcome.

[Pouletgrill]

Hello both of you, i had to generate the cpl file to order the pcb pre-assemble and it was not that hard to do. I could add the CPL file to github but i think it is best to generate it at the same time as the gerber files to make sur they both match.
All you have to do is install Autodesk EAGLE and open the pcb project of the github, then you follow the instruction in JLCPCB(if you want this service) and generate the bom and the CPL at the same time, then you can generate the gerber file and after that you should have what you need to order a fully assemble PCB!

To generate Bom/CPL:
https://support.jlcpcb.com/article/132-how-to-generate-bom-and-cpl-from-eagle-cad-automatically
To generate Gerber files:
https://support.jlcpcb.com/article/137-how-to-generate-gerber-and-drill-files-in-autodesk-eagle

[SavageCore]

@Pouletgrill Be interested in seeing that! Mostly what you chose for J1 and Y1 as the parts aren't on LCSC?