diff --git a/P5/Source/Guidelines/en/TD-DocumentationElements.xml b/P5/Source/Guidelines/en/TD-DocumentationElements.xml index a70542b00a..0112a134c7 100644 --- a/P5/Source/Guidelines/en/TD-DocumentationElements.xml +++ b/P5/Source/Guidelines/en/TD-DocumentationElements.xml @@ -874,7 +874,7 @@ to mark any technical term, thus: - One of the attributes @name, @ref, or @key must be supplied + One of the attributes @name, @ref, or @key must be supplied. @@ -882,7 +882,7 @@ to mark any technical term, thus: - Only one of the attributes @active and @mutual may be supplied + Only one of the attributes @active and @mutual may be supplied. @@ -890,7 +890,7 @@ to mark any technical term, thus: - the attribute @passive may be supplied only if the attribute @active is supplied + the attribute @passive may be supplied only if the attribute @active is supplied. @@ -906,13 +906,13 @@ to mark any technical term, thus: whose scheme matches that of the constraintDecl. - - - - - - - + + + + + + + In this example the Schematron query language binding is set (to xslt3) for use by a Schematron processor, two namespace prefixes are bound to namespace URIs for later use within @@ -939,8 +939,8 @@ to mark any technical term, thus: - if it contains any - subdivisions, a division must contain at least two of them + If it contains any + subdivisions, a division must contain at least two of them. @@ -953,17 +953,23 @@ to mark any technical term, thus: - an introductory component of the title is expected + + An introductory component of the title is expected. + - a main title must be supplied + + A main title must be supplied. + - a main title must be supplied + + A main title must be supplied. + @@ -978,8 +984,10 @@ to mark any technical term, thus: - You should provide information in a figure from - which we can construct an alt attribute in HTML + + You should provide information in a <figure> from + which we can construct an @alt attribute in HTML. + @@ -992,8 +1000,8 @@ to mark any technical term, thus: - A <table> should have a caption, using a <head> element - Do not use tables to lay out the document body + A <table> should have a caption, using a <head> element. + Do not use tables to lay out the document body. @@ -1147,7 +1155,7 @@ to mark any technical term, thus: - age at death must be an integer less than 150 + Age at death must be an integer less than 150. diff --git a/P5/Source/Specs/alternate.xml b/P5/Source/Specs/alternate.xml index 3ea1baf232..be9ed04848 100644 --- a/P5/Source/Specs/alternate.xml +++ b/P5/Source/Specs/alternate.xml @@ -18,7 +18,7 @@ - The alternate element must have at least two child elements + The alternate element must have at least two child elements. diff --git a/P5/Source/Specs/att.deprecated.xml b/P5/Source/Specs/att.deprecated.xml index 7e425ca424..ebf5362faa 100644 --- a/P5/Source/Specs/att.deprecated.xml +++ b/P5/Source/Specs/att.deprecated.xml @@ -26,10 +26,11 @@ - - - - + + + + + @@ -37,7 +38,7 @@ - A deprecated construct should include, whenever possible, an explanation, but this does not have a child <desc type="deprecationInfo"> + A deprecated construct should include, whenever possible, an explanation, but this does not have a child <desc type="deprecationInfo">. diff --git a/P5/Source/Specs/att.global.source.xml b/P5/Source/Specs/att.global.source.xml index 4a6a869ea8..aa36f3ce15 100644 --- a/P5/Source/Specs/att.global.source.xml +++ b/P5/Source/Specs/att.global.source.xml @@ -26,7 +26,7 @@ and $srcs[2]"> When used on a schema description element (like - ), the @source attribute + <>), the @source attribute should have only 1 value. (This one has .) diff --git a/P5/Source/Specs/att.repeatable.xml b/P5/Source/Specs/att.repeatable.xml index 08404914b2..6c1affefa3 100644 --- a/P5/Source/Specs/att.repeatable.xml +++ b/P5/Source/Specs/att.repeatable.xml @@ -17,10 +17,10 @@ - @maxOccurs should be greater than or equal to @minOccurs + @maxOccurs should be greater than or equal to @minOccurs. - When @maxOccurs is not specified, @minOccurs must be 0 or 1 + When @maxOccurs is not specified, @minOccurs must be 0 or 1. @@ -33,11 +33,8 @@ numero minimo di occorrenze número mínimo de apariciones 最小出現数 - indicates the smallest number of times this - component may occur. + indicates the smallest number of times this component may occur. この部品が出現し得る最小回数を示す。 - - @@ -51,8 +48,7 @@ numero minimo di occorrenze número máximo de apariciones. 最大出現数 - indicates the largest number of times this - component may occur. + indicates the largest number of times this component may occur. 概算推量のための最大推定値を与える。 diff --git a/P5/Source/Specs/att.spanning.xml b/P5/Source/Specs/att.spanning.xml index c8a5d50d73..da0e22a477 100644 --- a/P5/Source/Specs/att.spanning.xml +++ b/P5/Source/Specs/att.spanning.xml @@ -24,7 +24,7 @@ - The element indicated by @spanTo () must follow the current element + The element indicated by @spanTo () must follow the current <> element. diff --git a/P5/Source/Specs/att.typed.xml b/P5/Source/Specs/att.typed.xml index 0d56fb3c42..75b8687dd5 100644 --- a/P5/Source/Specs/att.typed.xml +++ b/P5/Source/Specs/att.typed.xml @@ -6,14 +6,15 @@ 요소의 분류 또는 하위분류에서 사용될 수 있는 속성을 제공한다. 提供可依任何方法將元素分類或次要分類的一般屬性。 要素を分類するための属性を示す。 - fournit des attributs qui peuvent être - utilisés pour classer ou interclasser des éléments de n'importe quelle façon. + fournit des attributs qui peuvent être utilisés pour classer ou interclasser des éléments de n'importe quelle façon. proporciona atributos genéricos utilizables para cualquier clasificación o subclasificación de elementos. assegna degli attributi generici utilizzabili per qualsiasi classificazione e sottoclassificazione di elementi. - The element should not be categorized in detail with @subtype unless also categorized in general with @type + + The <> element should not be categorized in detail with @subtype unless also categorized in general with @type. + @@ -22,8 +23,7 @@ - characterizes the element in some sense, using any convenient - classification scheme or typology. + characterizes the element in some sense, using any convenient classification scheme or typology. 다양한 분류 스키마 또는 유형을 사용해서 요소의 특성을 기술한다. 用合適的分類標準或類型來描述該元素。 当該要素の分類を示す。 @@ -48,8 +48,8 @@

The type attribute is present on a number of - elements, not all of which are members of att.typed, usually because these elements - restrict the possible values for the attribute in a specific way.

+ elements, not all of which are members of att.typed, usually because these elements + restrict the possible values for the attribute in a specific way.

@@ -59,8 +59,7 @@ 필요하다면 요소의 하위범주를 제시한다. 若有需要,提供該元素的次要分類 必要であれば、当該要素の下位分類を示す。 - fournit une sous-catégorisation de l'élément, si - c'est nécessaire. + fournit une sous-catégorisation de l'élément, si c'est nécessaire. proporciona, si es necesario, una subcategorización del elemento. stabilisce, se necessario, una sottocategorizzazione dell'elemento. @@ -80,7 +79,7 @@ sub-classification for the element additional to that provided by its

- 属性subtypeは、属性typeに加えて、当該要 + 属性subtypeは、属性typeに加えて、当該要 素の下位分類を示すために使われる。

diff --git a/P5/Source/Specs/attDef.xml b/P5/Source/Specs/attDef.xml index 1069910d6d..e23db50ddb 100644 --- a/P5/Source/Specs/attDef.xml +++ b/P5/Source/Specs/attDef.xml @@ -47,10 +47,11 @@ or tei:datatype or tei:valList[ @type eq 'closed']"> Attribute: the definition of the @ attribute in the - - - should - have a closed valList or a datatype + "" + + > + should have a child <valList> with a @type of "closed" or + a child <datatype>. @@ -58,7 +59,7 @@ - Since the @ attribute is required, it will always be specified. Thus the default value (of "") will never be used. Either change the definition of the attribute so it is not required ("rec" or "opt"), or remove the defaultVal element. + Since the @ attribute is required, it will always be specified. Thus the default value (of "") will never be used. Either change the definition of the attribute so it is not required ("rec" or "opt"), or remove the <defaultVal> element. @@ -79,10 +80,10 @@ and tei:valList[ @type eq 'closed'] and tei:datatype[ @maxOccurs > 1 or @minOccurs > 1 or @maxOccurs eq 'unbounded'] ]"> - In the defining - the default value of the + In the <> defining + "" the default value of the @ attribute is not among the closed list of possible - values + values. @@ -95,10 +96,13 @@ or ( if ( @maxOccurs castable as xs:integer ) then ( @maxOccurs cast as xs:integer eq 1 ) else false() ) ] ]"> - In the defining - the default value of the - @ attribute is not among the closed list of possible - values + + In the <> defining + "" the + default value of the @ + attribute is not among the closed list of possible + values. diff --git a/P5/Source/Specs/constraint.xml b/P5/Source/Specs/constraint.xml index b3ddb647ce..1bc1de12cd 100644 --- a/P5/Source/Specs/constraint.xml +++ b/P5/Source/Specs/constraint.xml @@ -20,7 +20,7 @@ - a main title must be supplied + A main title must be supplied. diff --git a/P5/Source/Specs/constraintSpec.xml b/P5/Source/Specs/constraintSpec.xml index 265108e4fb..a2808383c5 100644 --- a/P5/Source/Specs/constraintSpec.xml +++ b/P5/Source/Specs/constraintSpec.xml @@ -45,9 +45,9 @@ Rules - in the Schematron 1.* language must be inside a constraintSpec - with a value other than 'schematron' or 'isoschematron' on the - scheme attribute + in the Schematron 1.* language must be inside a <constraintSpec> + with a value other than "schematron" or "isoschematron" on the + @scheme attribute. @@ -56,8 +56,8 @@ Rules - in the ISO Schematron language must be inside a constraintSpec - with the value 'schematron' on the scheme attribute + in the ISO Schematron language must be inside a <constraintSpec> + with the value "schematron" on the @scheme attribute. @@ -74,8 +74,8 @@ - An <sch:assert> or <sch:report> - element must be a descendant of an <sch:rule> that has a @context; one or more inside this + An <sch:assert> or <sch:report> + element must be a descendant of an <sch:rule> that has a @context; one or more inside this are not. @@ -85,7 +85,9 @@ - The @ident of 'constraintSpec' should be unique; this one () is the same as that of a previous 'constraintSpec'. + The @ident of <constraintSpec> should be unique; this one + () is the same as that of a + previous <constraintSpec>. @@ -105,7 +107,10 @@ - The @scheme attribute of <constraintSpec> is required when the @mode is (here on "") + + The @scheme attribute of <constraintSpec> is required when the @mode is + + (here on ""). @@ -173,7 +178,7 @@ You should provide information in a figure from which - we can construct an alt attribute in HTML + we can construct an @alt attribute in HTML. diff --git a/P5/Source/Specs/dimensions.xml b/P5/Source/Specs/dimensions.xml index b8a688a172..8397099eb7 100644 --- a/P5/Source/Specs/dimensions.xml +++ b/P5/Source/Specs/dimensions.xml @@ -31,13 +31,13 @@ - The element may appear once only + The element <> may appear once only. - The element may appear once only + The element <> may appear once only. - The element may appear once only + The element <> may appear once only. @@ -63,8 +63,7 @@ le dimensioni si riferiscono a uno o più fogli (per esempio un foglio, una raccolta, o una parte rilegata separatamente). - dimensions relate to the area of a leaf which has been ruled in -preparation for writing. + dimensions relate to the area of a leaf which has been ruled in preparation for writing. 글쓰기를 준비하기 위해 줄 그은 종이 부분과 관련된 차원 頁面上劃好線以備書寫的範圍大小。 las dimensiones se refieren al área de una hoja que se ha preparado para la escritura. diff --git a/P5/Source/Specs/interleave.xml b/P5/Source/Specs/interleave.xml index 9b4a19ebca..b0631be4cf 100644 --- a/P5/Source/Specs/interleave.xml +++ b/P5/Source/Specs/interleave.xml @@ -14,7 +14,7 @@ - The interleave element must have at least two child elements + The <interleave> element must have at least two child elements. diff --git a/P5/Source/Specs/join.xml b/P5/Source/Specs/join.xml index 6dcb6c5971..90ef6626ee 100644 --- a/P5/Source/Specs/join.xml +++ b/P5/Source/Specs/join.xml @@ -28,7 +28,7 @@ - You must supply at least two values for @target on + You must supply at least two values for @target on <>. diff --git a/P5/Source/Specs/link.xml b/P5/Source/Specs/link.xml index 3b90913008..ed1bcfe492 100644 --- a/P5/Source/Specs/link.xml +++ b/P5/Source/Specs/link.xml @@ -22,16 +22,16 @@ - You must supply at least two values for @target or on + You must supply at least two values for @target on <>. The state Supreme Court has refused to release Rahway State Prison inmate - James Scott on bail. + James Scott on bail. The fighter is serving 30-40 years - for a 1975 armed robbery conviction in the penitentiary. + for a 1975 armed robbery conviction in the penitentiary. diff --git a/P5/Source/Specs/list.xml b/P5/Source/Specs/list.xml index 645d546f16..dd3ea4b0aa 100644 --- a/P5/Source/Specs/list.xml +++ b/P5/Source/Specs/list.xml @@ -10,11 +10,9 @@ 包含以列表方式呈現的任何連續項目。 リストのような、項目列を示す。 contient une suite d'items ordonnés dans une liste. - contiene cualquier secuencia de ítems o elementos - organizados en una lista. - contiene una qualsiasi sequenza di voci organizzate in - una lista. - enthält eine Reihe von Listenpunkten, die als Liste organisiert sind. + contiene cualquier secuencia de ítems o elementos organizados en una lista. + contiene una qualsiasi sequenza di voci organizzate in una lista. + enthält eine Reihe von Listenpunkten, die als Liste organisiert sind. @@ -22,71 +20,58 @@ - - - - - - - - - - - + - - - - - - - - + + + + + - - - + - - - - - - + + - - - + - - - + - - - - - - - - - - + + + + - The content of a "gloss" list should include a sequence of one or more pairs of a label element followed by an item element + + The content of a "gloss" list should include a sequence of + one or more pairs of a <label> element followed by an + <item> element. + @@ -96,7 +81,6 @@ @type and the new recommendation to use @rend, but the general consensus is that providing suggestions in the prose is better than formalizing them in the ODD. --> - type Typ @@ -193,7 +177,7 @@ a butcher a baker a candlestick maker, with - rings on his fingersbells on his toes + rings on his fingersbells on his toes diff --git a/P5/Source/Specs/model.xml b/P5/Source/Specs/model.xml index aaab06d5db..4d93985830 100644 --- a/P5/Source/Specs/model.xml +++ b/P5/Source/Specs/model.xml @@ -2,8 +2,7 @@ - describes the processing intended for a specified - element. + describes the processing intended for a specified element. @@ -19,9 +18,7 @@ - It is ambigous to have 2 models - that have both the same output and have no predicate - (and thus select the same set of nodes). + It is ambigous to have 2 models that have both the same output and have no predicate (and thus select the same set of nodes). @@ -100,8 +95,7 @@ - create a line, column, or page break - according to the value of type + create a line, column, or page break according to the value of type @@ -144,8 +138,7 @@ - if url is present, uses it to - display graphic, else display a placeholder image. + if url is present, uses it to display graphic, else display a placeholder image. @@ -161,8 +154,7 @@ scaling for image - title of figure (usually not displayed - directly) + title of figure (usually not displayed directly) @@ -175,17 +167,15 @@ - generate list according to - type. + generate list according to type. - creates inline element out of - content - + creates inline element out of content + @@ -228,8 +218,7 @@ - create a note, often out of line, depending - on the value of place; could be margin, footnote, endnote, inline + create a note, often out of line, depending on the value of place; could be margin, footnote, endnote, inline @@ -240,8 +229,7 @@ do nothing, do not process children - create a paragraph out of - content. + create a paragraph out of content. @@ -256,8 +244,7 @@ - create a new section of the output - document + create a new section of the output document @@ -285,8 +272,7 @@
- whether to obey any rendition attribute that is - present. + whether to obey any rendition attribute that is present. @@ -303,26 +289,21 @@
- the output is intended for presentation in a - web format + the output is intended for presentation in a web format - the output is intended for presentation in a - print format + the output is intended for presentation in a print format - the output is intended for presentation in a - plain text format + the output is intended for presentation in a plain text format -

If the output attribute is not specified, this model is assumed to apply for - all forms of output.

+

If the output attribute is not specified, this model is assumed to apply for all forms of output.

- the name of a CSS class which should be - associated with this element + the name of a CSS class which should be associated with this element @@ -337,12 +318,10 @@ - If it's inside a paragraph then it's - inline + If it's inside a paragraph then it's inline - If it's not inside a paragraph then it is - block level + If it's not inside a paragraph then it is block level @@ -350,8 +329,7 @@ - If it is a child of a person element, treat as - inline + If it is a child of a person element, treat as inline diff --git a/P5/Source/Specs/modelSequence.xml b/P5/Source/Specs/modelSequence.xml index a0801dbf11..c94bc4e33b 100644 --- a/P5/Source/Specs/modelSequence.xml +++ b/P5/Source/Specs/modelSequence.xml @@ -18,9 +18,9 @@ - The 'model' children - of a 'modelSequence' element inherit the @output attribute of the - parent 'modelSequence', and thus should not have their own + The <model> children + of a <modelSequence> element inherit the @output attribute of the + parent <modelSequence>, and thus should not have their own. diff --git a/P5/Source/Specs/moduleRef.xml b/P5/Source/Specs/moduleRef.xml index 23925bcdb2..f75ef595a8 100644 --- a/P5/Source/Specs/moduleRef.xml +++ b/P5/Source/Specs/moduleRef.xml @@ -25,7 +25,7 @@ - Child elements of are only allowed when an external module is being loaded + Child elements of <> are only allowed when an external module is being loaded. @@ -37,16 +37,17 @@ - The prefix attribute - of should not match that of any other - element (it would defeat the purpose) + + The @prefix attribute of <> should not + match that of any other element (it would defeat the + purpose). - It is an error to supply both the @include and @except attributes + It is an error to supply both the @include and @except attributes. diff --git a/P5/Source/Specs/quotation.xml b/P5/Source/Specs/quotation.xml index cf7a470d2d..7a9791d349 100644 --- a/P5/Source/Specs/quotation.xml +++ b/P5/Source/Specs/quotation.xml @@ -31,7 +31,7 @@ - On , either the @marks attribute should be used, or a paragraph of description provided + On <>, either the @marks attribute should be used, or a paragraph of description provided. diff --git a/P5/Source/Specs/rdgGrp.xml b/P5/Source/Specs/rdgGrp.xml index 26df60191a..e979848139 100644 --- a/P5/Source/Specs/rdgGrp.xml +++ b/P5/Source/Specs/rdgGrp.xml @@ -11,8 +11,7 @@ within a textual variation, groups two or more readings perceived to have a genetic relationship or other affinity. 텍스트 변이형 내에서 계통 관계 또는 유사 관계로 이해되는 둘 이상의 독법을 모아 놓는다. 原文變異中,匯集兩個或多個認為具有根源關係或於其他方面性質類似的對應本。 - 異なるテキストで、系統関係や類縁性があるとされる、二つ以上の読みをま - とめる。 + 異なるテキストで、系統関係や類縁性があるとされる、二つ以上の読みをま とめる。 regroupe deux leçons ou plus qui sont perçues comme ayant une relation génétique ou une autre affinité. agrupa al interno de una variante textual dos o más lecturas consideradas emparentadas o afines. all'interno di una variante testuale raggruppa due o più letture considerate imparentate o affini. @@ -35,7 +34,7 @@ - Only one <lem> element may appear within a <rdgGrp> + Only one <lem> element may appear within a <rdgGrp>. diff --git a/P5/Source/Specs/relatedItem.xml b/P5/Source/Specs/relatedItem.xml index b66824ad0d..2287a93c64 100644 --- a/P5/Source/Specs/relatedItem.xml +++ b/P5/Source/Specs/relatedItem.xml @@ -24,8 +24,8 @@ - If the @target attribute on is used, the relatedItem element must be empty - A relatedItem element should have either a @target attribute or a child element to indicate the related bibliographic item + If the @target attribute on is used, the relatedItem element must be empty. + A relatedItem element should have either a @target attribute or a child element to indicate the related bibliographic item. diff --git a/P5/Source/Specs/relation.xml b/P5/Source/Specs/relation.xml index 90cb3c043f..9dafc7c5e7 100644 --- a/P5/Source/Specs/relation.xml +++ b/P5/Source/Specs/relation.xml @@ -29,7 +29,7 @@ - One of the attributes @name, @ref or @key must be supplied + One of the attributes @name, @ref or @key must be supplied. @@ -43,14 +43,14 @@ — Syd, 2018-05-01 --> - Only one of the attributes @active and @mutual may be supplied + Only one of the attributes @active and @mutual may be supplied. - the attribute @passive may be supplied only if the attribute @active is supplied + the attribute @passive may be supplied only if the attribute @active is supplied. diff --git a/P5/Source/Specs/s.xml b/P5/Source/Specs/s.xml index b82ef415f4..f18b640eac 100644 --- a/P5/Source/Specs/s.xml +++ b/P5/Source/Specs/s.xml @@ -35,7 +35,7 @@ - You may not nest one s element within another: use seg instead + You may not nest one <s> element within another: use <seg> instead. diff --git a/P5/Source/Specs/sequence.xml b/P5/Source/Specs/sequence.xml index eec23aaa07..4d66659854 100644 --- a/P5/Source/Specs/sequence.xml +++ b/P5/Source/Specs/sequence.xml @@ -14,7 +14,7 @@ - The sequence element must have at least two child elements + The <sequence> element must have at least two child elements. diff --git a/P5/Source/Specs/span.xml b/P5/Source/Specs/span.xml index 0166bd3b3e..f91b901d8c 100644 --- a/P5/Source/Specs/span.xml +++ b/P5/Source/Specs/span.xml @@ -23,7 +23,7 @@ - Only one of the attributes @target and @from may be supplied on + Only one of the attributes @target and @from may be supplied on <>. @@ -32,7 +32,7 @@ - Only one of the attributes @target and @to may be supplied on + Only one of the attributes @target and @to may be supplied on <>. @@ -41,7 +41,7 @@ - If @to is supplied on , @from must be supplied as well + If @to is supplied on <>, @from must be supplied as well. @@ -50,7 +50,7 @@ - The attributes @to and @from on may each contain only a single value + The attributes @to and @from on <> may each contain only a single value. diff --git a/P5/Source/Specs/subst.xml b/P5/Source/Specs/subst.xml index 6e187f5e01..701ace6008 100644 --- a/P5/Source/Specs/subst.xml +++ b/P5/Source/Specs/subst.xml @@ -30,7 +30,8 @@ - must have at least one child add and at least one child del or surplus + + <> must have at least one child <add> and at least one child <del> or <surplus>. diff --git a/P5/Test/expected-results/detest_odd_schematron.svrl b/P5/Test/expected-results/detest_odd_schematron.svrl index 295e74ee14..5b137212fa 100644 --- a/P5/Test/expected-results/detest_odd_schematron.svrl +++ b/P5/Test/expected-results/detest_odd_schematron.svrl @@ -1,7 +1,7 @@ - - @@ -32,7 +32,7 @@ SAXON/HE 10.3 - 2026-01-02T22:30:53.164511762-05:00 + 2026-05-15T21:09:21.131151Z @@ -41,16 +41,16 @@ true - 2026-01-02T22:30:16.436963437-05:00 + 2026-05-15T21:08:39.712599Z + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> @@ -61,33 +61,30 @@ + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> - - - - - - + + + + + @@ -132,12 +129,12 @@ - - + + @@ -164,78 +161,78 @@ - - - - - - + + + + + + - + - - - - - - - - - - - - - - + + + + + + + + + + + + + + - + @@ -304,9 +301,9 @@ - + @@ -355,12 +352,12 @@ - - + + @@ -391,9 +388,9 @@ - + @@ -402,21 +399,21 @@ - + - - + + @@ -427,25 +424,25 @@ - - - - - - + + + + + + + documents="file:/TEI/P5/Test/detest.odd"/> An element reference within a content model must refer to a locally defined element specification (and thus this <elementRef> should not have @source). - + @@ -476,9 +473,9 @@ - + @@ -492,9 +489,9 @@ - + @@ -508,12 +505,12 @@ + - + documents="file:/TEI/P5/Test/detest.odd"/> @@ -531,29 +528,29 @@ - - + + - + In the context of tagset documentation, the listRef element must not self-nest. - + @@ -566,9 +563,9 @@ test="@target and not( matches( @target,'\s') )"> In the context of tagset documentation, each ptr or ref element inside a listRef must have a target attribute with only 1 pointer as its value. - + @@ -584,45 +581,48 @@ - - - - - - + + + + + + + + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> @@ -634,30 +634,30 @@ + documents="file:/TEI/P5/Test/detest.odd"/> - Rules in the ISO Schematron language must be inside a constraintSpec with the value 'schematron' on the scheme attribute + Rules in the ISO Schematron language must be inside a <constraintSpec> with the value "schematron" on the @scheme attribute. - Rules in the ISO Schematron language must be inside a constraintSpec with the value 'schematron' on the scheme attribute + Rules in the ISO Schematron language must be inside a <constraintSpec> with the value "schematron" on the @scheme attribute. - Rules in the ISO Schematron language must be inside a constraintSpec with the value 'schematron' on the scheme attribute + Rules in the ISO Schematron language must be inside a <constraintSpec> with the value "schematron" on the @scheme attribute. + documents="file:/TEI/P5/Test/detest.odd"/> @@ -669,7 +669,7 @@ + documents="file:/TEI/P5/Test/detest.odd"/> @@ -679,45 +679,45 @@ + documents="file:/TEI/P5/Test/detest.odd"/> - The @scheme attribute of <constraintSpec> is required when the @mode is not specified (here on "add_missing_scheme") + The @scheme attribute of <constraintSpec> is required when the @mode is not specified (here on "add_missing_scheme"). - The @scheme attribute of <constraintSpec> is required when the @mode is "replace" (here on "replace_missing_scheme") + The @scheme attribute of <constraintSpec> is required when the @mode is "replace" (here on "replace_missing_scheme"). + documents="file:/TEI/P5/Test/detest.odd"/> - The @scheme attribute of <constraintSpec> is required when the @mode is not specified (here on "add_missing_scheme") + The @scheme attribute of <constraintSpec> is required when the @mode is not specified (here on "add_missing_scheme"). - The @scheme attribute of <constraintSpec> is required when the @mode is "replace" (here on "replace_missing_scheme") + The @scheme attribute of <constraintSpec> is required when the @mode is "replace" (here on "replace_missing_scheme"). + documents="file:/TEI/P5/Test/detest.odd"/> @@ -743,7 +743,7 @@ + documents="file:/TEI/P5/Test/detest.odd"/> @@ -782,406 +782,403 @@ - Attribute: the definition of the @bad attribute in the no_duplicate_attrs_1_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @bad attribute in the "no_duplicate_attrs_1_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @good attribute in the no_duplicate_attrs_1_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @good attribute in the "no_duplicate_attrs_1_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @better attribute in the no_duplicate_attrs_1_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @better attribute in the "no_duplicate_attrs_1_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @best attribute in the no_duplicate_attrs_1_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @best attribute in the "no_duplicate_attrs_1_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @bad attribute in the no_duplicate_attrs_1_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @bad attribute in the "no_duplicate_attrs_1_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @bad attribute in the no_duplicate_attrs_1_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @bad attribute in the "no_duplicate_attrs_1_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @good attribute in the no_duplicate_attrs_1_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @good attribute in the "no_duplicate_attrs_1_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @better attribute in the no_duplicate_attrs_1_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @better attribute in the "no_duplicate_attrs_1_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @best attribute in the no_duplicate_attrs_1_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @best attribute in the "no_duplicate_attrs_1_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @bad attribute in the no_duplicate_attrs_1_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @bad attribute in the "no_duplicate_attrs_1_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @have attribute in the no_duplicate_attrs_2_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @have attribute in the "no_duplicate_attrs_2_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @fun attribute in the no_duplicate_attrs_2_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @fun attribute in the "no_duplicate_attrs_2_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @fun attribute in the no_duplicate_attrs_2_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @fun attribute in the "no_duplicate_attrs_2_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @fun attribute in the no_duplicate_attrs_2_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @fun attribute in the "no_duplicate_attrs_2_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @til attribute in the no_duplicate_attrs_2_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @til attribute in the "no_duplicate_attrs_2_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @her attribute in the no_duplicate_attrs_2_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @her attribute in the "no_duplicate_attrs_2_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @daddy attribute in the no_duplicate_attrs_2_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @daddy attribute in the "no_duplicate_attrs_2_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Your attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Your attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @My attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @My attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @spirit attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @spirit attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @and attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @and attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @my attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @my attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @your attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @your attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @voice attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @voice attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @in attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @in attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @one attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @one attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @combined attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @combined attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @The attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @The attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Phantom attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Phantom attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @of attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @of attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @the attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @the attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Opera attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Opera attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @is attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @is attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @there attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @there attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Inside attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Inside attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @my attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @my attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @your attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @your attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @mind attribute in the no_duplicate_attrs_3_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @mind attribute in the "no_duplicate_attrs_3_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Your attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Your attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @My attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @My attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @spirit attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @spirit attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @and attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @and attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @my attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @my attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @your attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @your attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @voice attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @voice attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @in attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @in attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @one attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @one attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @combined attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @combined attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @The attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @The attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Phantom attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Phantom attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @of attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @of attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @the attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @the attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Opera attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Opera attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @is attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @is attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @there attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @there attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @Inside attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @Inside attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @my attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @my attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @your attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @your attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @mind attribute in the no_duplicate_attrs_3_valid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @mind attribute in the "no_duplicate_attrs_3_valid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @all attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @all attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @the attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @the attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @leaves attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @leaves attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @are attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @are attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @brown attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @brown attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @and attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @and attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @the attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @the attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @sky attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @sky attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @is attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @is attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. - Attribute: the definition of the @gray attribute in the no_duplicate_attrs_4_invalid elementSpec should have a closed valList or a datatype + Attribute: the definition of the @gray attribute in the "no_duplicate_attrs_4_invalid" <elementSpec> should have a child <valList> with a @type of "closed" or a child <datatype>. + documents="file:/TEI/P5/Test/detest.odd"/> - Since the @default-is-in-list-req attribute is required, it will always be specified. Thus the default value (of "ONE") will never be used. Either change the definition of the attribute so it is not required ("rec" or "opt"), or remove the defaultVal element. + Since the @default-is-in-list-req attribute is required, it will always be specified. Thus the default value (of "ONE") will never be used. Either change the definition of the attribute so it is not required ("rec" or "opt"), or remove the <defaultVal> element. - Since the @default-NOT-in-list-req attribute is required, it will always be specified. Thus the default value (of "ONE") will never be used. Either change the definition of the attribute so it is not required ("rec" or "opt"), or remove the defaultVal element. + Since the @default-NOT-in-list-req attribute is required, it will always be specified. Thus the default value (of "ONE") will never be used. Either change the definition of the attribute so it is not required ("rec" or "opt"), or remove the <defaultVal> element. + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> - In the elementSpec defining blort2 the default value of the @default-NOT-in-list-opt attribute is not among the closed list of possible values + In the <elementSpec> defining "blort2" the default value of the @default-NOT-in-list-opt attribute is not among the closed list of possible values. - In the elementSpec defining blort2 the default value of the @default-NOT-in-list-rec attribute is not among the closed list of possible values + In the <elementSpec> defining "blort2" the default value of the @default-NOT-in-list-rec attribute is not among the closed list of possible values. - In the elementSpec defining blort2 the default value of the @default-NOT-in-list-req attribute is not among the closed list of possible values + In the <elementSpec> defining "blort2" the default value of the @default-NOT-in-list-req attribute is not among the closed list of possible values. + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> - + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> @@ -1192,81 +1189,82 @@ - - + + + + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> + documents="file:/TEI/P5/Test/detest.odd"/> diff --git a/P5/Test/expected-results/detest_xml_schematron.log b/P5/Test/expected-results/detest_xml_schematron.log index d489d58291..e4f6d14a7d 100644 --- a/P5/Test/expected-results/detest_xml_schematron.log +++ b/P5/Test/expected-results/detest_xml_schematron.log @@ -3,21 +3,21 @@ at /tei:TEI[1]/tei:text[1]/tei:body[1]/tei:div[2]/tei:div[2]/tei:head[1] — at /tei:TEI[1]/tei:text[1]/tei:body[1]/tei:div[2]/tei:div[2]/tei:div[1]/tei:p[1]/tei:s[1] — The @generatedBy attribute is for use within a element. at /tei:TEI[1]/tei:text[1]/tei:body[1]/tei:div[2]/tei:div[3]/tei:p[1]/tei:delSpan[3] — - The element indicated by @spanTo (#ds2) must follow the current delSpan element + The element indicated by @spanTo (#ds2) must follow the current element. at /tei:TEI[1]/tei:teiHeader[1]/tei:encodingDesc[1]/tei:styleDefDecl[1] — @schemeVersion can only be used if @scheme is specified. at /tei:TEI[1]/tei:text[1]/tei:body[1]/tei:div[9]/tei:p[1]/tei:abbr[1] — - The abbr element should not be categorized in detail with @subtype unless also categorized in general with @type + The element should not be categorized in detail with @subtype unless also categorized in general with @type. at /tei:TEI[1]/tei:text[1]/tei:body[1]/tei:div[11]/tei:div[3] — - The div element should not be categorized in detail with @subtype unless also categorized in general with @type + The
element should not be categorized in detail with @subtype unless also categorized in general with @type. at /tei:TEI[1]/tei:text[1]/tei:body[1]/tei:div[2]/tei:div[1]/tei:p[2]/tei:date[1] — @calendar indicates one or more systems or calendars to which the date represented by the content of this element belongs, but this date element has no textual content. at /tei:TEI[1]/tei:text[1]/tei:body[1]/tei:div[16]/tei:list[3] — - The content of a "gloss" list should include a sequence of one or more pairs of a label element followed by an item element + The content of a "gloss" list should include a sequence of one or more pairs of a