From 31d32668f5ff629de336d01fd6613a11cff2f662 Mon Sep 17 00:00:00 2001
From: Pontus Hedman <phedman@perle.com>
Date: Tue, 3 Dec 2024 14:02:32 -0500
Subject: [PATCH 1/7] New PSL build changes.

For use with phedman-test branch of nexus-build
---
 .gitignore                                |  3 ++
 PSL-README.md                             |  8 ++++++
 PSL-mklinks                               | 34 +++++++++++++++++++++++
 patches/scripts/build_distroiGOS.sh.patch | 25 +++++++++++++++++
 4 files changed, 70 insertions(+)
 create mode 100644 PSL-README.md
 create mode 100755 PSL-mklinks
 create mode 100644 patches/scripts/build_distroiGOS.sh.patch

diff --git a/.gitignore b/.gitignore
index 07ece42..e95913f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -2,3 +2,6 @@ build
 tools
 *.swp
 logs
+buildiGOSti2.sh
+scripts/build_distroiGOS.sh
+scripts/build_distroiGOS.sh.orig
diff --git a/PSL-README.md b/PSL-README.md
new file mode 100644
index 0000000..e69870e
--- /dev/null
+++ b/PSL-README.md
@@ -0,0 +1,8 @@
+# Perle ti-bdebstrap fork
+
+This is a fork from 
+https://github.com/TexasInstruments/ti-bdebstrap.git
+
+To merge TI's upstream changes, do:
+
+	git merge --ff origin/master
diff --git a/PSL-mklinks b/PSL-mklinks
new file mode 100755
index 0000000..5e2a1cf
--- /dev/null
+++ b/PSL-mklinks
@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# Make symbolic links into nexus-build
+#
+test $# != 1 && { echo "Usage: $0 dstdir" >&2; exit 1; }
+DST=$1
+test -d $DST || { echo "$0: $DST does not exist" >&2; exit 2; }
+
+set -e
+cd $(dirname $0)
+
+F=buildiGOSti2.sh
+if [ ! -f "$F" ]; then
+    echo "I: Modifying build.sh into $F"
+    cp -fp build.sh $F
+    sed -e 's/build_distro.sh/build_distroiGOS.sh/' -e 's/generate_rootfs/#&/' < build.sh > $F
+fi
+
+mkdir -p $DST/scripts
+F=scripts/build_distroiGOS.sh
+if [ ! -f "$F" ]; then
+    echo "I: Patching build_distro.sh into $F"
+    cp -fp scripts/build_distro.sh $F
+    patch -p0 -F20 < patches/$F.patch
+fi
+ln -rfvs $F $DST/scripts
+
+rm -rf $DST/configs
+ln -rfvs configs $DST
+ln -rfvs builds.toml $DST
+ln -rfvs create-sdcard.sh $DST
+ln -rfvs scripts/build_bsp.sh $DST/scripts
+ln -rfvs scripts/common.sh $DST/scripts
+ln -rfvs scripts/setup.sh $DST/scripts
diff --git a/patches/scripts/build_distroiGOS.sh.patch b/patches/scripts/build_distroiGOS.sh.patch
new file mode 100644
index 0000000..8bb380a
--- /dev/null
+++ b/patches/scripts/build_distroiGOS.sh.patch
@@ -0,0 +1,25 @@
+--- scripts/build_distroiGOS.sh	2024-10-00 00:00:00.000000000 -0500
++++ scripts/build_distroiGOS.sh	2024-11-00 00:00:00.000000000 -0500
+@@ -21,7 +21,7 @@
+ 
+     cd ${topdir}/build/
+ 
+-    ROOTFS_DIR=${topdir}/build/${distro}/tisdk-debian-${distro}}-rootfs
++    ROOTFS_DIR=${topdir}/build/${distro}/tisdk-debian-${distro}-rootfs
+ }
+ 
+ function package_and_clean() {
+@@ -29,6 +29,8 @@
+ bsp_version=$2
+ 
+     cd ${topdir}/build/${build}
++    rm -rf tisdk-debian-${distro}-${bsp_version}-rootfs
++    cp -rp ../fs/ tisdk-debian-${distro}-${bsp_version}-rootfs
+ 
+     log "> Cleaning up ${build}"
+     tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-rootfs.tar.xz tisdk-debian-${distro}-${bsp_version}-rootfs &>>"${LOG_FILE}"
+@@ -44,4 +46,3 @@
+     log "> Packaging ${build}"
+     tar --use-compress-program="pigz --best --recursive | pv" -cf ${distro}-${bsp_version}.tar.xz ${build} &>>"${LOG_FILE}"
+ }
+-

From 308cc67ccb9a7424a6e8c25f60d205b5cf52f0a1 Mon Sep 17 00:00:00 2001
From: Pontus Hedman <phedman@perle.com>
Date: Wed, 4 Dec 2024 10:40:22 -0500
Subject: [PATCH 2/7] create-sdcardiGOS.sh support

---
 .gitignore                         |  1 +
 PSL-mklinks                        |  9 ++++++++-
 patches/create-sdcardiGOS.sh.patch | 30 ++++++++++++++++++++++++++++++
 3 files changed, 39 insertions(+), 1 deletion(-)
 create mode 100644 patches/create-sdcardiGOS.sh.patch

diff --git a/.gitignore b/.gitignore
index e95913f..a560935 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,5 +3,6 @@ tools
 *.swp
 logs
 buildiGOSti2.sh
+create-sdcardiGOS.sh
 scripts/build_distroiGOS.sh
 scripts/build_distroiGOS.sh.orig
diff --git a/PSL-mklinks b/PSL-mklinks
index 5e2a1cf..c9b3661 100755
--- a/PSL-mklinks
+++ b/PSL-mklinks
@@ -25,10 +25,17 @@ if [ ! -f "$F" ]; then
 fi
 ln -rfvs $F $DST/scripts
 
+F=create-sdcardiGOS.sh
+if [ ! -f "$F" ]; then
+    echo "I: Patching create-sdcard.sh into $F"
+    cp -fp create-sdcard.sh $F
+    patch -p1 -F20 < patches/$F.patch
+fi
+ln -rfvs $F $DST
+
 rm -rf $DST/configs
 ln -rfvs configs $DST
 ln -rfvs builds.toml $DST
-ln -rfvs create-sdcard.sh $DST
 ln -rfvs scripts/build_bsp.sh $DST/scripts
 ln -rfvs scripts/common.sh $DST/scripts
 ln -rfvs scripts/setup.sh $DST/scripts
diff --git a/patches/create-sdcardiGOS.sh.patch b/patches/create-sdcardiGOS.sh.patch
new file mode 100644
index 0000000..25741a4
--- /dev/null
+++ b/patches/create-sdcardiGOS.sh.patch
@@ -0,0 +1,30 @@
+diff --git a/create-sdcardiGOS.sh b/create-sdcardiGOS.sh
+index a1b1190..1beda4e 100755
+--- a/create-sdcardiGOS.sh
++++ b/create-sdcardiGOS.sh
+@@ -182,7 +182,7 @@ populate_3_partitions() {
+         mkdir $PWD/tmp
+ 
+         mount -t vfat ${DRIVE}${P}1 boot
+-        mount -t ext3 ${DRIVE}${P}2 rootfs
++        mount         ${DRIVE}${P}2 rootfs
+         mount -t ext3 ${DRIVE}${P}3 start_here
+ 
+         # Remove any existing content in case the partitions were not
+@@ -673,7 +673,7 @@ mkdir $PATH_TO_SDBOOT
+ mkdir $PATH_TO_SDROOTFS
+ 
+ sudo mount -t vfat ${DRIVE}${P}1 boot/
+-sudo mount -t ext3 ${DRIVE}${P}2 rootfs/
++sudo mount         ${DRIVE}${P}2 rootfs/
+ 
+ 
+ 
+@@ -690,6 +690,7 @@ sync
+ sync
+ sync
+ 
++build=*
+ BOOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-boot.tar.xz"
+ ROOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-rootfs.tar.xz"
+ 

From 351c0c1cbc1189fb659295251674e51799dd8be4 Mon Sep 17 00:00:00 2001
From: Dennis Kong <dkong@perle.com>
Date: Fri, 24 Jan 2025 18:17:13 -0500
Subject: [PATCH 3/7] N-12006:fix special file capabilities missing by not
 using tar file and copying with rsync and cp -ra options

---
 patches/create-sdcardiGOS.sh.patch        | 19 ++++++++++++++-----
 patches/scripts/build_distroiGOS.sh.patch |  2 +-
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/patches/create-sdcardiGOS.sh.patch b/patches/create-sdcardiGOS.sh.patch
index 25741a4..cf3bcc8 100644
--- a/patches/create-sdcardiGOS.sh.patch
+++ b/patches/create-sdcardiGOS.sh.patch
@@ -1,7 +1,7 @@
-diff --git a/create-sdcardiGOS.sh b/create-sdcardiGOS.sh
-index a1b1190..1beda4e 100755
---- a/create-sdcardiGOS.sh
-+++ b/create-sdcardiGOS.sh
+diff --git a/create-sdcard.sh b/create-sdcard.sh
+index a1b1190..4f4e953 100755
+--- a/create-sdcard.sh
++++ b/create-sdcard.sh
 @@ -182,7 +182,7 @@ populate_3_partitions() {
          mkdir $PWD/tmp
  
@@ -20,11 +20,20 @@ index a1b1190..1beda4e 100755
  
  
  
-@@ -690,6 +690,7 @@ sync
+@@ -690,8 +690,10 @@ sync
  sync
  sync
  
 +build=*
  BOOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-boot.tar.xz"
  ROOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-rootfs.tar.xz"
++ROOTFSPATH="$PARSEPATH/tisdk-debian-${build}-rootfs/*"
  
+ cat << EOM
+ ################################################################################
+@@ -710,7 +712,7 @@ echo ""
+ sync
+ 
+ echo "Copying rootfs System partition"
+-untar_progress $ROOTFILEPATH $PATH_TO_SDROOTFS
++rsync -aHAX $ROOTFSPATH $PATH_TO_SDROOTFS
diff --git a/patches/scripts/build_distroiGOS.sh.patch b/patches/scripts/build_distroiGOS.sh.patch
index 8bb380a..2fb1589 100644
--- a/patches/scripts/build_distroiGOS.sh.patch
+++ b/patches/scripts/build_distroiGOS.sh.patch
@@ -14,7 +14,7 @@
  
      cd ${topdir}/build/${build}
 +    rm -rf tisdk-debian-${distro}-${bsp_version}-rootfs
-+    cp -rp ../fs/ tisdk-debian-${distro}-${bsp_version}-rootfs
++    cp -ra ../fs/ tisdk-debian-${distro}-${bsp_version}-rootfs
  
      log "> Cleaning up ${build}"
      tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-rootfs.tar.xz tisdk-debian-${distro}-${bsp_version}-rootfs &>>"${LOG_FILE}"

From 892cbb19516f825de4c31cc5a5a23bbe7c3871c6 Mon Sep 17 00:00:00 2001
From: Dennis Kong <dkong@perle.com>
Date: Mon, 27 Jan 2025 18:31:10 -0500
Subject: [PATCH 4/7] N-12006-fix invalid patch for create-sdcardiGOS.sh and
 removed -F20 option from PSL-mklinks script

---
 PSL-mklinks                        | 2 +-
 patches/create-sdcardiGOS.sh.patch | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/PSL-mklinks b/PSL-mklinks
index c9b3661..71bbe9c 100755
--- a/PSL-mklinks
+++ b/PSL-mklinks
@@ -29,7 +29,7 @@ F=create-sdcardiGOS.sh
 if [ ! -f "$F" ]; then
     echo "I: Patching create-sdcard.sh into $F"
     cp -fp create-sdcard.sh $F
-    patch -p1 -F20 < patches/$F.patch
+    patch -p1 < patches/$F.patch
 fi
 ln -rfvs $F $DST
 
diff --git a/patches/create-sdcardiGOS.sh.patch b/patches/create-sdcardiGOS.sh.patch
index cf3bcc8..685dde1 100644
--- a/patches/create-sdcardiGOS.sh.patch
+++ b/patches/create-sdcardiGOS.sh.patch
@@ -1,7 +1,7 @@
-diff --git a/create-sdcard.sh b/create-sdcard.sh
+diff --git a/create-sdcardiGOS.sh b/create-sdcardiGOS.sh
 index a1b1190..4f4e953 100755
---- a/create-sdcard.sh
-+++ b/create-sdcard.sh
+--- a/create-sdcardiGOS.sh
++++ b/create-sdcardiGOS.sh
 @@ -182,7 +182,7 @@ populate_3_partitions() {
          mkdir $PWD/tmp
  

From 0626f13b35515e7d9128d19a91107bc01fbf498f Mon Sep 17 00:00:00 2001
From: Jack Kim <jkim@perle.com>
Date: Fri, 14 Feb 2025 10:52:11 -0500
Subject: [PATCH 5/7] Fix to meet new strategy

As we decide to manage our repo and directly apply changes to our code,
1. Removed patch/copy things in "PSL-mklinks" script.
2. Applied changes to the source tree directoy.
---
 .gitignore                                |   4 -
 PSL-mklinks                               |  31 +-
 buildiGOSti2.sh                           |  76 +++
 create-sdcardiGOS.sh                      | 741 ++++++++++++++++++++++
 patches/create-sdcardiGOS.sh.patch        |  39 --
 patches/scripts/build_distroiGOS.sh.patch |  25 -
 scripts/build_distroiGOS.sh               |  48 ++
 7 files changed, 869 insertions(+), 95 deletions(-)
 create mode 100755 buildiGOSti2.sh
 create mode 100755 create-sdcardiGOS.sh
 delete mode 100644 patches/create-sdcardiGOS.sh.patch
 delete mode 100644 patches/scripts/build_distroiGOS.sh.patch
 create mode 100755 scripts/build_distroiGOS.sh

diff --git a/.gitignore b/.gitignore
index a560935..07ece42 100644
--- a/.gitignore
+++ b/.gitignore
@@ -2,7 +2,3 @@ build
 tools
 *.swp
 logs
-buildiGOSti2.sh
-create-sdcardiGOS.sh
-scripts/build_distroiGOS.sh
-scripts/build_distroiGOS.sh.orig
diff --git a/PSL-mklinks b/PSL-mklinks
index 71bbe9c..dfac719 100755
--- a/PSL-mklinks
+++ b/PSL-mklinks
@@ -9,33 +9,10 @@ test -d $DST || { echo "$0: $DST does not exist" >&2; exit 2; }
 set -e
 cd $(dirname $0)
 
-F=buildiGOSti2.sh
-if [ ! -f "$F" ]; then
-    echo "I: Modifying build.sh into $F"
-    cp -fp build.sh $F
-    sed -e 's/build_distro.sh/build_distroiGOS.sh/' -e 's/generate_rootfs/#&/' < build.sh > $F
-fi
-
-mkdir -p $DST/scripts
-F=scripts/build_distroiGOS.sh
-if [ ! -f "$F" ]; then
-    echo "I: Patching build_distro.sh into $F"
-    cp -fp scripts/build_distro.sh $F
-    patch -p0 -F20 < patches/$F.patch
-fi
-ln -rfvs $F $DST/scripts
-
-F=create-sdcardiGOS.sh
-if [ ! -f "$F" ]; then
-    echo "I: Patching create-sdcard.sh into $F"
-    cp -fp create-sdcard.sh $F
-    patch -p1 < patches/$F.patch
-fi
-ln -rfvs $F $DST
-
 rm -rf $DST/configs
 ln -rfvs configs $DST
 ln -rfvs builds.toml $DST
-ln -rfvs scripts/build_bsp.sh $DST/scripts
-ln -rfvs scripts/common.sh $DST/scripts
-ln -rfvs scripts/setup.sh $DST/scripts
+ln -rfvs create-sdcardiGOS.sh $DST
+
+rm -rf $DST/scripts
+ln -rfvs scripts $DST
diff --git a/buildiGOSti2.sh b/buildiGOSti2.sh
new file mode 100755
index 0000000..be0f226
--- /dev/null
+++ b/buildiGOSti2.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# Filename: build.sh
+# Author: "Sai Sree Kartheek Adivi <s-adivi@ti.com>"
+# Description: Script to build a Debian SD card image for TI Platforms
+###############################################################################
+
+# set -x
+
+export topdir=$(git rev-parse --show-toplevel)
+
+source ${topdir}/scripts/setup.sh
+source ${topdir}/scripts/common.sh
+source ${topdir}/scripts/build_bsp.sh
+source ${topdir}/scripts/build_distroiGOS.sh
+
+if [ "$EUID" -ne 0 ] ; then
+    echo "Failed to run: requires root privileges"
+    echo "Exiting"
+    exit 1
+fi
+
+# exit if no arguments are passed
+if [ "$#" -ne 0 ]; then
+    builds="$@"
+else
+    echo "build.sh: missing operand"
+    echo "Specify one or more builds from the \"builds.toml\" file."
+    exit 1
+fi
+
+mkdir -p ${topdir}/build
+
+for build in ${builds}
+do
+
+    echo "${build}"
+
+    validate_section "Build" ${build} "${topdir}/builds.toml"
+
+    machine=($(read_build_config ${build} machine))
+    distro_codename=($(read_build_config ${build} distro_codename))
+    rt_linux=($(read_build_config ${build} rt_linux))
+
+    if [ ${rt_linux} == "true" ]; then
+        distro=${distro_codename}-rt-${machine}
+    else
+        distro=${distro_codename}-${machine}
+    fi
+
+    bsp_version=($(read_bsp_config ${distro_codename} bsp_version))
+
+    export host_arch=`uname -m`
+    export native_build=false
+    export cross_compile=aarch64-none-linux-gnu-
+    if [ "$host_arch" == "aarch64" ]; then
+        native_build=true
+        cross_compile=
+    fi
+
+    echo "machine: ${machine}"
+    echo "bsp_version: ${bsp_version}"
+    echo "distro: ${distro}"
+    echo "host_arch: ${host_arch}"
+
+    setup_build_tools
+
+    setup_log_file "${build}"
+
+    validate_build ${machine} ${bsp_version} ${distro_codename}/${distro}.yaml
+
+    #generate_rootfs ${distro} ${distro_codename} ${machine} ${bsp_version}
+    build_bsp ${distro} ${machine} ${bsp_version}
+    package_and_clean ${distro} ${bsp_version}
+
+done
+
diff --git a/create-sdcardiGOS.sh b/create-sdcardiGOS.sh
new file mode 100755
index 0000000..4f4e953
--- /dev/null
+++ b/create-sdcardiGOS.sh
@@ -0,0 +1,741 @@
+#!/bin/bash
+# Authors:
+#    LT Thomas <ltjr@ti.com>
+#    Chase Maupin
+#    Franklin Cooper Jr.
+#
+# create-sdcard.sh v0.3
+
+# This distribution contains contributions or derivatives under copyright
+# as follows:
+#
+# Copyright (c) 2023, Texas Instruments Incorporated
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# - Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# - Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# - Neither the name of Texas Instruments nor the names of its
+#   contributors may be used to endorse or promote products derived
+#   from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Force locale language to be set to English. This avoids issues when doing
+# text and string processing.
+export LANG=C
+
+# Determine the absolute path to the executable
+# EXE will have the PWD removed so we can concatenate with the PWD safely
+PWD=`pwd`
+EXE=`echo $0 | sed s=$PWD==`
+EXEPATH="$PWD"/"$EXE"
+clear
+
+build=${1}
+PARSEPATH=./build/${build}
+
+cat << EOM
+
+################################################################################
+
+This script will create a bootable SD card from the built binaries.
+
+The script must be run with root permissions and from the bin directory of
+the SDK
+
+Usage:
+ $ sudo ./create-sdcard.sh <build-id>
+
+Formatting can be skipped if the SD card is already formatted and
+partitioned properly.
+
+################################################################################
+
+EOM
+
+AMIROOT=`whoami | awk {'print $1'}`
+if [ "$AMIROOT" != "root" ] ; then
+
+	echo "	**** Error *** must run script with sudo"
+	echo ""
+	exit
+fi
+
+#Precentage function
+untar_progress ()
+{
+    TARBALL=$1;
+    DIRECTPATH=$2;
+    REALPATH=`realpath $TARBALL`
+    echo "Copying $REALPATH"
+    cd $DIRECTPATH
+    tar -xf $REALPATH
+    sudo mv tisdk*/* .
+    sudo rm -rf tisdk*
+    cd - > /dev/null
+}
+
+#copy/paste programs
+cp_progress ()
+{
+	CURRENTSIZE=0
+	while [ $CURRENTSIZE -lt $TOTALSIZE ]
+	do
+		TOTALSIZE=$1;
+		TOHERE=$2;
+		CURRENTSIZE=`sudo du -c $TOHERE | grep total | awk {'print $1'}`
+		echo -e -n "$CURRENTSIZE /  $TOTALSIZE copied \r"
+		sleep 1
+	done
+}
+
+check_for_sdcards()
+{
+        # find the avaible SD cards
+        ROOTDRIVE=`mount | grep 'on / ' | awk {'print $1'} |  cut -c6-8`
+        PARTITION_TEST=`cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n ''`
+        if [ "$PARTITION_TEST" = "" ]; then
+	        echo -e "Please insert a SD card to continue\n"
+	        while [ "$PARTITION_TEST" = "" ]; do
+		        read -p "Type 'y' to re-detect the SD card or 'n' to exit the script: " REPLY
+		        if [ "$REPLY" = 'n' ]; then
+		            exit 1
+		        fi
+		        ROOTDRIVE=`mount | grep 'on / ' | awk {'print $1'} |  cut -c6-8`
+		        PARTITION_TEST=`cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n ''`
+	        done
+        fi
+}
+
+populate_3_partitions() {
+    ENTERCORRECTLY="0"
+	while [ $ENTERCORRECTLY -ne 1 ]
+	do
+		read -e -p 'Enter path where SD card tarballs were downloaded : '  TARBALLPATH
+
+		echo ""
+		ENTERCORRECTLY=1
+		if [ -d $TARBALLPATH ]
+		then
+			echo "Directory exists"
+			echo ""
+			echo "This directory contains:"
+			ls $TARBALLPATH
+			echo ""
+			read -p 'Is this correct? [y/n] : ' ISRIGHTPATH
+				case $ISRIGHTPATH in
+				"y" | "Y") ;;
+				"n" | "N" ) ENTERCORRECTLY=0;continue;;
+				*)  echo "Please enter y or n";ENTERCORRECTLY=0;continue;;
+				esac
+		else
+			echo "Invalid path make sure to include complete path"
+			ENTERCORRECTLY=0
+            continue
+		fi
+        # Check that tarballs were found
+        if [ ! -e "$TARBALLPATH""/boot_partition.tar.xz" ]
+        then
+            echo "Could not find boot_partition.tar.xz as expected.  Please"
+            echo "point to the directory containing the boot_partition.tar.xz"
+            ENTERCORRECTLY=0
+            continue
+        fi
+
+        if [ ! -e "$TARBALLPATH""/rootfs_partition.tar.xz" ]
+        then
+            echo "Could not find rootfs_partition.tar.xz as expected.  Please"
+            echo "point to the directory containing the rootfs_partition.tar.xz"
+            ENTERCORRECTLY=0
+            continue
+        fi
+
+        if [ ! -e "$TARBALLPATH""/start_here_partition.tar.xz" ]
+        then
+            echo "Could not find start_here_partition.tar.xz as expected.  Please"
+            echo "point to the directory containing the start_here_partition.tar.xz"
+            ENTERCORRECTLY=0
+            continue
+        fi
+	done
+
+        # Make temporary directories and untar mount the partitions
+        mkdir $PWD/boot
+        mkdir $PWD/rootfs
+        mkdir $PWD/start_here
+        mkdir $PWD/tmp
+
+        mount -t vfat ${DRIVE}${P}1 boot
+        mount         ${DRIVE}${P}2 rootfs
+        mount -t ext3 ${DRIVE}${P}3 start_here
+
+        # Remove any existing content in case the partitions were not
+        # recreated
+        sudo rm -rf boot/*
+        sudo rm -rf rootfs/*
+        sudo rm -rf start_here/*
+
+        # Extract the tarball contents.
+cat << EOM
+
+################################################################################
+        Extracting boot partition tarball
+
+################################################################################
+EOM
+        untar_progress $TARBALLPATH/boot_partition.tar.xz tmp/
+        if [ -e "./tmp/MLO" ]
+        then
+            cp ./tmp/MLO boot/
+        fi
+        cp -rf ./tmp/* boot/
+
+cat << EOM
+
+################################################################################
+        Extracting rootfs partition tarball
+
+################################################################################
+EOM
+        untar_progress $TARBALLPATH/rootfs_partition.tar.xz rootfs/
+
+cat << EOM
+
+################################################################################
+        Extracting start_here partition to temp directory
+
+################################################################################
+EOM
+        rm -rf tmp/*
+        untar_progress $TARBALLPATH/start_here_partition.tar.xz tmp/
+
+cat << EOM
+
+################################################################################
+        Copying Contents to START_HERE
+
+################################################################################
+EOM
+
+        TOTALSIZE=`sudo du -c tmp/* | grep total | awk {'print $1'}`
+        cp -rf tmp/* start_here/ &
+        cp_progress $TOTALSIZE start_here/
+        sync;sync
+        # Fix up the START_HERE partitoin permissions
+        chown nobody -R start_here
+        chgrp nogroup -R start_here
+
+        umount boot rootfs start_here
+        sync;sync
+
+        # Clean up the temp directories
+        rm -rf boot rootfs start_here tmp
+}
+
+
+# find the avaible SD cards
+ROOTDRIVE=`mount | grep 'on / ' | awk {'print $1'} |  cut -c6-9`
+if [ "$ROOTDRIVE" = "root" ]; then
+    ROOTDRIVE=`readlink /dev/root | cut -c1-3`
+else
+    ROOTDRIVE=`echo $ROOTDRIVE | cut -c1-3`
+fi
+
+PARTITION_TEST=`cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n ''`
+
+# Check for available mounts
+check_for_sdcards
+
+echo -e "\nAvailable Drives to write images to: \n"
+echo "#  major   minor    size   name "
+cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n ''
+echo " "
+
+DEVICEDRIVENUMBER=
+while true;
+do
+	read -p 'Enter Device Number or 'n' to exit: ' DEVICEDRIVENUMBER
+	echo " "
+        if [ "$DEVICEDRIVENUMBER" = 'n' ]; then
+                exit 1
+        fi
+
+        if [ "$DEVICEDRIVENUMBER" = "" ]; then
+                # Check to see if there are any changes
+                check_for_sdcards
+                echo -e "These are the Drives available to write images to:"
+                echo "#  major   minor    size   name "
+                cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n ''
+                echo " "
+               continue
+        fi
+
+	DEVICEDRIVENAME=`cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n '' | grep "${DEVICEDRIVENUMBER}:" | awk '{print $5}'`
+	if [ -n "$DEVICEDRIVENAME" ]
+	then
+	        DRIVE=/dev/$DEVICEDRIVENAME
+	        DEVICESIZE=`cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n '' | grep "${DEVICEDRIVENUMBER}:" | awk '{print $4}'`
+		break
+	else
+		echo -e "Invalid selection!"
+                # Check to see if there are any changes
+                check_for_sdcards
+                echo -e "These are the only Drives available to write images to: \n"
+                echo "#  major   minor    size   name "
+                cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' | grep -n ''
+                echo " "
+	fi
+done
+
+echo "$DEVICEDRIVENAME was selected"
+#Check the size of disk to make sure its under 16GB
+if [ $DEVICESIZE -gt 17000000 ] ; then
+cat << EOM
+
+################################################################################
+
+		**********WARNING**********
+
+	Selected Device is greater then 16GB
+	Continuing past this point will erase data from device
+	Double check that this is the correct SD Card
+
+################################################################################
+
+EOM
+	ENTERCORRECTLY=0
+	while [ $ENTERCORRECTLY -ne 1 ]
+	do
+		read -p 'Would you like to continue [y/n] : ' SIZECHECK
+		echo ""
+		echo " "
+		ENTERCORRECTLY=1
+		case $SIZECHECK in
+		"y")  ;;
+		"n")  exit;;
+		*)  echo "Please enter y or n";ENTERCORRECTLY=0;;
+		esac
+		echo ""
+	done
+
+fi
+echo ""
+
+DRIVE=/dev/$DEVICEDRIVENAME
+NUM_OF_DRIVES=`df | grep -c $DEVICEDRIVENAME`
+
+# This if statement will determine if we have a mounted sdX or mmcblkX device.
+# If it is mmcblkX, then we need to set an extra char in the partition names, 'p',
+# to account for /dev/mmcblkXpY labled partitions.
+if [[ ${DEVICEDRIVENAME} =~ ^sd. ]]; then
+	echo "$DRIVE is an sdx device"
+	P=''
+else
+	echo "$DRIVE is an mmcblkx device"
+	P='p'
+fi
+
+if [ "$NUM_OF_DRIVES" != "0" ]; then
+        echo "Unmounting the $DEVICEDRIVENAME drives"
+        for ((c=1; c<="$NUM_OF_DRIVES"; c++ ))
+        do
+                unmounted=`df | grep '\<'$DEVICEDRIVENAME$P$c'\>' | awk '{print $1}'`
+                if [ -n "$unmounted" ]
+                then
+                     echo " unmounted ${DRIVE}$P$c"
+                     sudo umount -f ${DRIVE}$P$c
+                fi
+
+        done
+fi
+
+# Refresh this variable as the device may not be mounted at script instantiation time
+# This will always return one more then needed
+NUM_OF_PARTS=`cat /proc/partitions | grep -v $ROOTDRIVE | grep -c $DEVICEDRIVENAME`
+for ((c=1; c<"$NUM_OF_PARTS"; c++ ))
+do
+        SIZE=`cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<'$DEVICEDRIVENAME$P$c'\>'  | awk '{print $3}'`
+        echo "Current size of $DEVICEDRIVENAME$P$c $SIZE bytes"
+done
+
+# check to see if the device is already partitioned
+for ((  c=1; c<5; c++ ))
+do
+	eval "SIZE$c=`cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<'$DEVICEDRIVENAME$P$c'\>'  | awk '{print $3}'`"
+done
+
+PARTITION="0"
+if [ -n "$SIZE1" -a -n "$SIZE2" ] ; then
+	if  [ "$SIZE1" -gt "128000" -a "$SIZE2" -gt "700000" ]
+	then
+		PARTITION=1
+
+		if [ -z "$SIZE3" -a -z "$SIZE4" ]
+		then
+			#Detected 2 partitions
+			PARTS=2
+
+		elif [ "$SIZE3" -gt "1000" -a -z "$SIZE4" ]
+		then
+			#Detected 3 partitions
+			PARTS=3
+
+		else
+			echo "SD Card is not correctly partitioned"
+			PARTITION=0
+		fi
+	fi
+else
+	echo "SD Card is not correctly partitioned"
+	PARTITION=0
+	PARTS=0
+fi
+
+
+#Partition is found
+if [ "$PARTITION" -eq "1" ]
+then
+cat << EOM
+
+################################################################################
+
+   Detected device has $PARTS partitions already
+
+   Re-partitioning will allow the choice of 2 or 3 partitions
+
+################################################################################
+
+EOM
+
+	ENTERCORRECTLY=0
+	while [ $ENTERCORRECTLY -ne 1 ]
+	do
+		read -p 'Would you like to re-partition the drive anyways [y/n] : ' CASEPARTITION
+		echo ""
+		echo " "
+		ENTERCORRECTLY=1
+		case $CASEPARTITION in
+		"y")  echo "Now partitioning $DEVICEDRIVENAME ...";PARTITION=0;;
+		"n")  echo "Skipping partitioning";;
+		*)  echo "Please enter y or n";ENTERCORRECTLY=0;;
+		esac
+		echo ""
+	done
+
+fi
+
+#Partition is not found, choose to partition 2 or 3 segments
+if [ "$PARTITION" -eq "0" ]
+then
+cat << EOM
+
+################################################################################
+
+	Select 2 partitions if only need boot and rootfs (most users).
+	Select 3 partitions if need SDK & other content on SD card.  This is
+        usually used by device manufacturers with access to partition tarballs.
+
+	****WARNING**** continuing will erase all data on $DEVICEDRIVENAME
+
+################################################################################
+
+EOM
+	ENTERCORRECTLY=0
+	while [ $ENTERCORRECTLY -ne 1 ]
+	do
+
+		read -p 'Number of partitions needed [2/3] : ' CASEPARTITIONNUMBER
+		echo ""
+		echo " "
+		ENTERCORRECTLY=1
+		case $CASEPARTITIONNUMBER in
+		"2")  echo "Now partitioning $DEVICEDRIVENAME with 2 partitions...";PARTITION=2;;
+		"3")  echo "Now partitioning $DEVICEDRIVENAME with 3 partitions...";PARTITION=3;;
+		"n")  exit;;
+		*)  echo "Please enter 2 or 3";ENTERCORRECTLY=0;;
+		esac
+		echo " "
+	done
+fi
+
+
+
+#Section for partitioning the drive
+
+#create 3 partitions
+if [ "$PARTITION" -eq "3" ]
+then
+
+# set the PARTS value as well
+PARTS=3
+
+cat << EOM
+
+################################################################################
+
+		Now making 3 partitions
+
+################################################################################
+
+EOM
+
+dd if=/dev/zero of=$DRIVE bs=1024 count=1024
+
+SIZE=`fdisk -l $DRIVE | grep Disk | awk '{print $5}'`
+
+echo DISK SIZE - $SIZE bytes
+
+cat << END | fdisk $DRIVE
+n
+p
+1
+
++128M
+n
+p
+2
+
++2.4G
+n
+p
+3
+
+
+t
+1
+c
+a
+1
+w
+END
+
+
+cat << EOM
+
+################################################################################
+
+		Partitioning Boot
+
+################################################################################
+EOM
+	mkfs.vfat -F 32 -n "boot" ${DRIVE}${P}1
+cat << EOM
+
+################################################################################
+
+		Partitioning Rootfs
+
+################################################################################
+EOM
+	mkfs.ext3 -L "rootfs" ${DRIVE}${P}2
+cat << EOM
+
+################################################################################
+
+		Partitioning START_HERE
+
+################################################################################
+EOM
+	mkfs.ext3 -L "START_HERE" ${DRIVE}${P}3
+	sync
+	sync
+
+#create only 2 partitions
+elif [ "$PARTITION" -eq "2" ]
+then
+
+# Set the PARTS value as well
+PARTS=2
+cat << EOM
+
+################################################################################
+
+		Now making 2 partitions
+
+################################################################################
+
+EOM
+dd if=/dev/zero of=$DRIVE bs=1024 count=1024
+
+SIZE=`fdisk -l $DRIVE | grep Disk | awk '{print $5}'`
+
+echo DISK SIZE - $SIZE bytes
+
+cat << END | fdisk $DRIVE
+n
+p
+1
+
++128M
+n
+p
+2
+
+
+t
+1
+c
+a
+1
+w
+END
+
+cat << EOM
+
+################################################################################
+
+		Partitioning Boot
+
+################################################################################
+EOM
+	mkfs.vfat -F 32 -n "boot" ${DRIVE}${P}1
+cat << EOM
+
+################################################################################
+
+		Partitioning rootfs
+
+################################################################################
+EOM
+	mkfs.ext3 -L "rootfs" ${DRIVE}${P}2
+	sync
+	sync
+	INSTALLSTARTHERE=n
+fi
+
+
+
+#Break between partitioning and installing file system
+cat << EOM
+
+
+################################################################################
+
+   Partitioning is now done
+   Continue to install filesystem or select 'n' to safe exit
+
+   **Warning** Continuing will erase files any files in the partitions
+
+################################################################################
+
+
+EOM
+ENTERCORRECTLY=0
+while [ $ENTERCORRECTLY -ne 1 ]
+do
+	read -p 'Would you like to continue? [y/n] : ' EXITQ
+	echo ""
+	echo " "
+	ENTERCORRECTLY=1
+	case $EXITQ in
+	"y") ;;
+	"n") exit;;
+	*)  echo "Please enter y or n";ENTERCORRECTLY=0;;
+	esac
+done
+
+# If this is a three partition card then we will jump to a function to
+# populate the three partitions and then exit the script.  If not we
+# go on to prompt the user for input on the two partitions
+if [ "$PARTS" -eq "3" ]
+then
+    populate_3_partitions
+    exit 0
+fi
+
+#Add directories for images
+export START_DIR=$PWD
+mkdir $START_DIR/tmp
+export PATH_TO_SDBOOT=boot
+export PATH_TO_SDROOTFS=rootfs
+export PATH_TO_TMP_DIR=$START_DIR/tmp
+
+
+echo " "
+echo "Mount the partitions "
+mkdir $PATH_TO_SDBOOT
+mkdir $PATH_TO_SDROOTFS
+
+sudo mount -t vfat ${DRIVE}${P}1 boot/
+sudo mount         ${DRIVE}${P}2 rootfs/
+
+
+
+echo " "
+echo "Emptying partitions "
+echo " "
+sudo rm -rf  $PATH_TO_SDBOOT/*
+sudo rm -rf  $PATH_TO_SDROOTFS/*
+
+echo ""
+echo "Syncing...."
+echo ""
+sync
+sync
+sync
+
+build=*
+BOOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-boot.tar.xz"
+ROOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-rootfs.tar.xz"
+ROOTFSPATH="$PARSEPATH/tisdk-debian-${build}-rootfs/*"
+
+cat << EOM
+################################################################################
+
+	Copying files now... will take minutes
+
+################################################################################
+
+Copying boot partition
+EOM
+
+
+untar_progress $BOOTFILEPATH $PATH_TO_SDBOOT
+echo ""
+
+sync
+
+echo "Copying rootfs System partition"
+rsync -aHAX $ROOTFSPATH $PATH_TO_SDROOTFS
+
+echo ""
+echo ""
+sync
+sync
+sync
+sync
+sync
+sync
+
+echo " "
+echo "Un-mount the partitions "
+sudo umount -f $PATH_TO_SDBOOT
+sudo umount -f $PATH_TO_SDROOTFS
+
+
+echo " "
+echo "Remove created temp directories "
+sudo rm -rf $PATH_TO_TMP_DIR
+sudo rm -rf $PATH_TO_SDROOTFS
+sudo rm -rf $PATH_TO_SDBOOT
+
+
+echo " "
+echo "Operation Finished"
+echo " "
diff --git a/patches/create-sdcardiGOS.sh.patch b/patches/create-sdcardiGOS.sh.patch
deleted file mode 100644
index 685dde1..0000000
--- a/patches/create-sdcardiGOS.sh.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-diff --git a/create-sdcardiGOS.sh b/create-sdcardiGOS.sh
-index a1b1190..4f4e953 100755
---- a/create-sdcardiGOS.sh
-+++ b/create-sdcardiGOS.sh
-@@ -182,7 +182,7 @@ populate_3_partitions() {
-         mkdir $PWD/tmp
- 
-         mount -t vfat ${DRIVE}${P}1 boot
--        mount -t ext3 ${DRIVE}${P}2 rootfs
-+        mount         ${DRIVE}${P}2 rootfs
-         mount -t ext3 ${DRIVE}${P}3 start_here
- 
-         # Remove any existing content in case the partitions were not
-@@ -673,7 +673,7 @@ mkdir $PATH_TO_SDBOOT
- mkdir $PATH_TO_SDROOTFS
- 
- sudo mount -t vfat ${DRIVE}${P}1 boot/
--sudo mount -t ext3 ${DRIVE}${P}2 rootfs/
-+sudo mount         ${DRIVE}${P}2 rootfs/
- 
- 
- 
-@@ -690,8 +690,10 @@ sync
- sync
- sync
- 
-+build=*
- BOOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-boot.tar.xz"
- ROOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-rootfs.tar.xz"
-+ROOTFSPATH="$PARSEPATH/tisdk-debian-${build}-rootfs/*"
- 
- cat << EOM
- ################################################################################
-@@ -710,7 +712,7 @@ echo ""
- sync
- 
- echo "Copying rootfs System partition"
--untar_progress $ROOTFILEPATH $PATH_TO_SDROOTFS
-+rsync -aHAX $ROOTFSPATH $PATH_TO_SDROOTFS
diff --git a/patches/scripts/build_distroiGOS.sh.patch b/patches/scripts/build_distroiGOS.sh.patch
deleted file mode 100644
index 2fb1589..0000000
--- a/patches/scripts/build_distroiGOS.sh.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- scripts/build_distroiGOS.sh	2024-10-00 00:00:00.000000000 -0500
-+++ scripts/build_distroiGOS.sh	2024-11-00 00:00:00.000000000 -0500
-@@ -21,7 +21,7 @@
- 
-     cd ${topdir}/build/
- 
--    ROOTFS_DIR=${topdir}/build/${distro}/tisdk-debian-${distro}}-rootfs
-+    ROOTFS_DIR=${topdir}/build/${distro}/tisdk-debian-${distro}-rootfs
- }
- 
- function package_and_clean() {
-@@ -29,6 +29,8 @@
- bsp_version=$2
- 
-     cd ${topdir}/build/${build}
-+    rm -rf tisdk-debian-${distro}-${bsp_version}-rootfs
-+    cp -ra ../fs/ tisdk-debian-${distro}-${bsp_version}-rootfs
- 
-     log "> Cleaning up ${build}"
-     tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-rootfs.tar.xz tisdk-debian-${distro}-${bsp_version}-rootfs &>>"${LOG_FILE}"
-@@ -44,4 +46,3 @@
-     log "> Packaging ${build}"
-     tar --use-compress-program="pigz --best --recursive | pv" -cf ${distro}-${bsp_version}.tar.xz ${build} &>>"${LOG_FILE}"
- }
--
diff --git a/scripts/build_distroiGOS.sh b/scripts/build_distroiGOS.sh
new file mode 100755
index 0000000..e074e79
--- /dev/null
+++ b/scripts/build_distroiGOS.sh
@@ -0,0 +1,48 @@
+#!/bin/bash
+
+source ${topdir}/scripts/common.sh
+
+function generate_rootfs() {
+distro=$1
+distro_codename=$2
+machine=$3
+bsp_version=$4
+
+    cd ${topdir}
+
+    log "> Building rootfs .."
+    bdebstrap \
+        -c ${topdir}/configs/bdebstrap_configs/${distro_codename}/${distro}.yaml \
+        --name ${topdir}/build/${distro} \
+        --target tisdk-debian-${distro}-${bsp_version}-rootfs \
+        --hostname ${machine} \
+        -f \
+        &>>"${LOG_FILE}"
+
+    cd ${topdir}/build/
+
+    ROOTFS_DIR=${topdir}/build/${distro}/tisdk-debian-${distro}-rootfs
+}
+
+function package_and_clean() {
+build=$1
+bsp_version=$2
+
+    cd ${topdir}/build/${build}
+    rm -rf tisdk-debian-${distro}-${bsp_version}-rootfs
+    cp -ra ../fs/ tisdk-debian-${distro}-${bsp_version}-rootfs
+
+    log "> Cleaning up ${build}"
+    tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-rootfs.tar.xz tisdk-debian-${distro}-${bsp_version}-rootfs &>>"${LOG_FILE}"
+    rm -rf tisdk-debian-${distro}-rootfs
+
+    tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-boot.tar.xz tisdk-debian-${distro}-${bsp_version}-boot &>>"${LOG_FILE}"
+    rm -rf tisdk-debian-${distro}-${bsp_version}-boot
+
+    rm -rf bsp_sources
+
+    cd ${topdir}/build/
+
+    log "> Packaging ${build}"
+    tar --use-compress-program="pigz --best --recursive | pv" -cf ${distro}-${bsp_version}.tar.xz ${build} &>>"${LOG_FILE}"
+}

From 9420bac39bfeb0fb6bc2df7ff43545a0f1afd26e Mon Sep 17 00:00:00 2001
From: Jack Kim <jkim@perle.com>
Date: Fri, 14 Feb 2025 14:24:25 -0500
Subject: [PATCH 6/7] Add J7200-evm u-boot build.

---
 buildiGOSti2.sh                               |  2 +-
 builds.toml                                   |  5 ++
 .../bookworm/bookworm-j7200-evm.yaml          | 84 +++++++++++++++++++
 configs/bsp_sources.toml                      | 10 ++-
 configs/machines/09.02.00.010.toml            |  9 ++
 configs/machines/09.02.00.011.toml            | 55 ++++++++++++
 .../0001-tiboot3-default-dtb-fix.patch        | 34 ++++++++
 scripts/build_bsp.sh                          | 30 +++++--
 scripts/build_distroiGOS.sh                   |  7 +-
 9 files changed, 224 insertions(+), 12 deletions(-)
 create mode 100644 configs/bdebstrap_configs/bookworm/bookworm-j7200-evm.yaml
 create mode 100644 configs/machines/09.02.00.011.toml
 create mode 100644 patches/ti-u-boot/0001-tiboot3-default-dtb-fix.patch

diff --git a/buildiGOSti2.sh b/buildiGOSti2.sh
index be0f226..7980682 100755
--- a/buildiGOSti2.sh
+++ b/buildiGOSti2.sh
@@ -47,7 +47,7 @@ do
         distro=${distro_codename}-${machine}
     fi
 
-    bsp_version=($(read_bsp_config ${distro_codename} bsp_version))
+    bsp_version=($(read_bsp_config ${distro} bsp_version))
 
     export host_arch=`uname -m`
     export native_build=false
diff --git a/builds.toml b/builds.toml
index 8e0a131..7b4cfde 100644
--- a/builds.toml
+++ b/builds.toml
@@ -22,6 +22,7 @@ builds = [
     "bookworm-rt-am62xxsip-evm",
     "bookworm-am64xx-evm",
     "bookworm-rt-am64xx-evm",
+    "bookworm-j7200-evm",
 ]
 
 # List of all valid trixie builds
@@ -126,3 +127,7 @@ builds = [
     distro_codename = "bookworm"
     rt_linux = "true"
 
+[bookworm-j7200-evm]
+    machine = "j7200-evm"
+    distro_codename = "bookworm"
+    rt_linux = "false"
diff --git a/configs/bdebstrap_configs/bookworm/bookworm-j7200-evm.yaml b/configs/bdebstrap_configs/bookworm/bookworm-j7200-evm.yaml
new file mode 100644
index 0000000..521cb6b
--- /dev/null
+++ b/configs/bdebstrap_configs/bookworm/bookworm-j7200-evm.yaml
@@ -0,0 +1,84 @@
+---
+mmdebstrap:
+  architectures:
+    - arm64
+  mode: auto
+  keyrings:
+    - /usr/share/keyrings/debian-archive-keyring.gpg
+  suite: bookworm
+  variant: standard
+  hostname: j7200-evm
+  components:
+    - main
+    - contrib
+    - non-free-firmware
+  packages:
+    - build-essential
+    - gpg
+    - curl
+    - firmware-ti-connectivity
+    - init
+    - iproute2
+    - less
+    - libdrm-dev
+    - libpam-systemd
+    - locales
+    - neofetch
+    - network-manager
+    - net-tools
+    - openssh-server
+    - sudo
+    - vim
+    - k3conf
+    - weston
+    - linux-image-6.1.83-k3
+    - linux-headers-6.1.83-k3
+    - linux-libc-dev
+    - cryptodev-linux-dkms
+    - firmware-ti-ipc-j7200
+    - firmware-cnm-wave
+    - firmware-ti-eth-j7200
+    - libti-rpmsg-char
+    - libti-rpmsg-char-dev
+    - libpru-pssp-dev
+    - pru-pssp
+    - parted
+    - e2fsprogs
+  mirrors:
+    - http://deb.debian.org/debian
+  setup-hooks:
+      # Setup TI Debian Package Repository
+    - 'mkdir -p $1/etc/apt/sources.list.d/'
+    - 'wget https://raw.githubusercontent.com/TexasInstruments/ti-debpkgs/main/ti-debpkgs.sources -P $1/etc/apt/sources.list.d/'
+      # Setup Apt repository preferences
+    - 'mkdir -p $1/etc/apt/preferences.d/'
+    - 'printf "Package: *\nPin: origin TexasInstruments.github.io\nPin-Priority: 1001" >> $1/etc/apt/preferences.d/ti-debpkgs'
+      # Setup Kernel post-install scripts
+    - 'mkdir -p $1/etc/kernel/postinst.d/'
+    - 'echo "PWD = $PWD"'
+    - 'upload target/kernel/postinst.d/cp-kernel-and-overlays /etc/kernel/postinst.d/cp-kernel-and-overlays'
+    - 'chmod a+x $1/etc/kernel/postinst.d/cp-kernel-and-overlays'
+  essential-hooks:
+    # FIXME: Find a better workaround instead of sleep
+    - 'sleep 10' # workaround for /proc resource busy unable to umount issue
+  customize-hooks:
+      # Remove passwd for root user
+    - 'chroot "$1" passwd --delete root'
+      # Fix apt install mandb permission issue
+    - 'chroot "$1" chown -R man: /var/cache/man/'
+    - 'chroot "$1" chmod -R 755 /var/cache/man/'
+      # update packages to avoid mandatory update after first boot
+    - 'chroot "$1" apt-get update'
+      # Setup .bashrc for clean command-line experience
+    - 'chroot "$1" cp /etc/skel/.bashrc ~/.bashrc'
+      # Enable ssh to root user without password
+    - 'chroot "$1" echo "PermitRootLogin yes" >> $1/etc/ssh/sshd_config'
+    - 'chroot "$1" echo "PermitEmptyPasswords yes" >> $1/etc/ssh/sshd_config'
+      # Resize Rootfs Service
+    - 'chroot "$1" mkdir -p /usr/bin'
+    - 'upload target/resize_rootfs/resize_rootfs.sh /usr/bin/resize_rootfs.sh'
+    - 'chroot "$1" chmod a+x /usr/bin/resize_rootfs.sh'
+    - 'chroot "$1" mkdir -p /etc/systemd/system/'
+    - 'upload target/resize_rootfs/resize_rootfs.service /etc/systemd/system/resize_rootfs.service'
+    - '$BDEBSTRAP_HOOKS/enable-units "$1" resize_rootfs'
+
diff --git a/configs/bsp_sources.toml b/configs/bsp_sources.toml
index 4db1488..05ac8aa 100644
--- a/configs/bsp_sources.toml
+++ b/configs/bsp_sources.toml
@@ -2,9 +2,12 @@
 [trixie]
     bsp_version = "10.01.08.02"
 
-[bookworm]
+[bookworm-am64xx-evm]
     bsp_version = "09.02.00.010"
 
+[bookworm-j7200-evm]
+    bsp_version = "09.02.00.011"
+
 # BSP Configurations
 [10.01.08.02]
     atf_srcrev = "58b25570c9ef91753b14c2103f45f4be9dddb696"
@@ -18,3 +21,8 @@
     uboot_srcrev = "09.02.00.010"
     linux_fw_srcrev = "09.02.00.010"
 
+[09.02.00.011]
+    atf_srcrev = "58b25570c9ef91753b14c2103f45f4be9dddb696"
+    optee_srcrev = "4.4.0"
+    uboot_srcrev = "10.01.08"
+    linux_fw_srcrev = "ti-linux-firmware"
diff --git a/configs/machines/09.02.00.010.toml b/configs/machines/09.02.00.010.toml
index d6e44b0..ca107b1 100644
--- a/configs/machines/09.02.00.010.toml
+++ b/configs/machines/09.02.00.010.toml
@@ -44,3 +44,12 @@
     optee_make_args = "."
     uboot_r5_defconfig = "am64x_evm_r5_defconfig"
     uboot_a53_defconfig = "am64x_evm_a53_defconfig"
+
+[j7200-evm]
+    # u-boot config
+    atf_target_board = "generic"
+    atf_make_args="K3_PM_SYSTEM_SUSPEND=1"
+    optee_platform = "k3-j721e"
+    optee_make_args = "ta-targets=ta_arm64"
+    uboot_r5_defconfig = "j7200_evm_r5_defconfig"
+    uboot_a72_defconfig = "j7200_evm_a72_defconfig"
diff --git a/configs/machines/09.02.00.011.toml b/configs/machines/09.02.00.011.toml
new file mode 100644
index 0000000..ca107b1
--- /dev/null
+++ b/configs/machines/09.02.00.011.toml
@@ -0,0 +1,55 @@
+# This file describes various machine specific settings needed for the build
+
+[am62pxx-evm]
+    # u-boot config
+    atf_target_board = "lite"
+    atf_make_args="K3_PM_SYSTEM_SUSPEND=1"
+    optee_platform = "k3-am62px"
+    optee_make_args = "CFG_WITH_SOFTWARE_PRNG=y CFG_TEE_CORE_LOG_LEVEL=1"
+    uboot_r5_defconfig = "am62px_evm_r5_defconfig"
+    uboot_a53_defconfig = "am62px_evm_a53_defconfig"
+
+[am62xx-evm]
+    # u-boot config
+    atf_target_board = "lite"
+    atf_make_args="K3_PM_SYSTEM_SUSPEND=1"
+    optee_platform = "k3-am62x"
+    optee_make_args = "CFG_TEE_CORE_LOG_LEVEL=1"
+    uboot_r5_defconfig = "am62x_evm_r5_defconfig"
+    uboot_a53_defconfig = "am62x_evm_a53_defconfig"
+
+[am62xx-lp-evm]
+    # u-boot config
+    atf_target_board = "lite"
+    atf_make_args="K3_PM_SYSTEM_SUSPEND=1"
+    optee_platform = "k3-am62x"
+    optee_make_args = "CFG_TEE_CORE_LOG_LEVEL=1"
+    uboot_r5_defconfig = "am62x_lpsk_r5_defconfig"
+    uboot_a53_defconfig = "am62x_lpsk_a53_defconfig"
+
+[am62xxsip-evm]
+    # u-boot config
+    atf_target_board = "lite"
+    atf_make_args="K3_PM_SYSTEM_SUSPEND=1"
+    optee_platform = "k3-am62x"
+    optee_make_args = "CFG_TEE_CORE_LOG_LEVEL=1"
+    uboot_r5_defconfig = "am62x_evm_r5_defconfig,am62xsip_sk_r5.config"
+    uboot_a53_defconfig = "am62x_evm_a53_defconfig"
+
+[am64xx-evm]
+    # u-boot config
+    atf_target_board = "lite"
+    atf_make_args="K3_PM_SYSTEM_SUSPEND=1"
+    optee_platform = "k3-am64x"
+    optee_make_args = "."
+    uboot_r5_defconfig = "am64x_evm_r5_defconfig"
+    uboot_a53_defconfig = "am64x_evm_a53_defconfig"
+
+[j7200-evm]
+    # u-boot config
+    atf_target_board = "generic"
+    atf_make_args="K3_PM_SYSTEM_SUSPEND=1"
+    optee_platform = "k3-j721e"
+    optee_make_args = "ta-targets=ta_arm64"
+    uboot_r5_defconfig = "j7200_evm_r5_defconfig"
+    uboot_a72_defconfig = "j7200_evm_a72_defconfig"
diff --git a/patches/ti-u-boot/0001-tiboot3-default-dtb-fix.patch b/patches/ti-u-boot/0001-tiboot3-default-dtb-fix.patch
new file mode 100644
index 0000000..37f054c
--- /dev/null
+++ b/patches/ti-u-boot/0001-tiboot3-default-dtb-fix.patch
@@ -0,0 +1,34 @@
+diff --git a/arch/arm/dts/k3-j7200-binman.dtsi b/arch/arm/dts/k3-j7200-binman.dtsi
+index a524b246187..52d83be9425 100644
+--- a/arch/arm/dts/k3-j7200-binman.dtsi
++++ b/arch/arm/dts/k3-j7200-binman.dtsi
+@@ -188,6 +188,7 @@
+ &binman {
+ 	tiboot3-j7200_sr2-hs-fs-evm.bin {
+ 		filename = "tiboot3-j7200_sr2-hs-fs-evm.bin";
++		symlink = "tiboot3.bin";
+ 		ti-secure-rom {
+ 			content = <&u_boot_spl_fs>, <&ti_fs_enc_fs>, <&combined_tifs_cfg_fs>,
+ 				<&combined_dm_cfg_fs>, <&sysfw_inner_cert_fs>;
+@@ -233,7 +234,7 @@
+ &binman {
+ 	tiboot3-j7200-gp-evm.bin {
+ 		filename = "tiboot3-j7200-gp-evm.bin";
+-		symlink = "tiboot3.bin";
++		/* symlink = "tiboot3.bin"; */
+ 		ti-secure-rom {
+ 			content = <&u_boot_spl_unsigned>, <&ti_fs_gp>,
+ 				<&combined_tifs_cfg_gp>, <&combined_dm_cfg_gp>;
+diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
+index 90d3411e2ff..c6103624b16 100644
+--- a/board/ti/j721e/evm.c
++++ b/board/ti/j721e/evm.c
+@@ -401,7 +401,7 @@ void configure_serdes_sierra(void)
+ static struct ti_fdt_map ti_j721e_evm_fdt_map[] = {
+ 	{"j721e", "k3-j721e-common-proc-board.dtb"},
+ 	{"j721e-sk", "k3-j721e-sk.dtb"},
+-	{"j7200", "k3-j7200-common-proc-board.dtb"},
++	{"j7200", "k3-j7200-evm.dtb"},
+ 	{ /* Sentinel. */ }
+ };
+ static void setup_board_eeprom_env(void)
diff --git a/scripts/build_bsp.sh b/scripts/build_bsp.sh
index cd5dbbf..45f8d44 100755
--- a/scripts/build_bsp.sh
+++ b/scripts/build_bsp.sh
@@ -1,5 +1,18 @@
 #!/bin/bash
 
+ROOT_DIR=$(dirname $(dirname $0))
+DEFS_FILE=".defs.mk"
+
+. ${ROOT_DIR}/${DEFS_FILE}
+if [ "$BUILDTYPE" = "bookworm-am64xx-evm" ]; then
+    ARM_A_CORE=a53
+elif [ "$BUILDTYPE" = "bookworm-j7200-evm" ]; then
+    ARM_A_CORE=a72
+else
+    echo "=== E: $0: Undefined BUILDTARG:BUILDTYPE ($BUILDTARG:$BUILDTYPE)"
+    exit 1
+fi
+
 function build_bsp() {
 build=$1
 machine=$2
@@ -62,10 +75,10 @@ bsp_version=$3
             --single-branch \
             --depth=1 &>>"${LOG_FILE}"
         log ">> ti-u-boot: cloned"
-        if [ -d ${topdir}/patches/ti-u-boot ]; then
+        if [ -d ${topdir}/ti-bdebstrap/patches/ti-u-boot ]; then
             log ">> ti-u-boot: patching .."
             cd ti-u-boot
-            git apply ${topdir}/patches/ti-u-boot/* &>>"${LOG_FILE}"
+            git apply ${topdir}/ti-bdebstrap/patches/ti-u-boot/* &>>"${LOG_FILE}"
             cd ..
         fi
     else
@@ -131,7 +144,8 @@ bsp_version=$2
 
     uboot_r5_defconfig=($(read_machine_config ${machine} uboot_r5_defconfig ${bsp_version}))
     uboot_r5_defconfig=`echo $uboot_r5_defconfig | tr ',' ' '`
-    uboot_a53_defconfig=($(read_machine_config ${machine} uboot_a53_defconfig ${bsp_version}))
+    uboot_acore_defconfig=($(read_machine_config ${machine} uboot_${ARM_A_CORE}_defconfig ${bsp_version}))
+    platform=($(read_machine_config ${machine} atf_target_board ${bsp_version}))
 
     cd ${UBOOT_DIR}
     log "> uboot-r5: building .."
@@ -140,11 +154,11 @@ bsp_version=$2
     cp ${UBOOT_DIR}/out/r5/tiboot3*.bin ${topdir}/build/${build}/tisdk-debian-${distro}-${bsp_version}-boot/ &>> ${LOG_FILE}
 
     cd ${UBOOT_DIR}
-    log "> uboot-a53: building .."
-    make -j`nproc` ARCH=arm CROSS_COMPILE=${cross_compile} ${uboot_a53_defconfig} O=${UBOOT_DIR}/out/a53 &>>"${LOG_FILE}"
-    make -j`nproc` ARCH=arm CROSS_COMPILE=${cross_compile} BL31=${TFA_DIR}/build/k3/lite/release/bl31.bin TEE=${OPTEE_DIR}/out/arm-plat-k3/core/tee-pager_v2.bin O=${UBOOT_DIR}/out/a53 BINMAN_INDIRS=${topdir}/build/${build}/bsp_sources/ti-linux-firmware &>>"${LOG_FILE}"
-    cp ${UBOOT_DIR}/out/a53/tispl.bin ${topdir}/build/${build}/tisdk-debian-${distro}-${bsp_version}-boot/ &>> ${LOG_FILE}
-    cp ${UBOOT_DIR}/out/a53/u-boot.img ${topdir}/build/${build}/tisdk-debian-${distro}-${bsp_version}-boot/ &>> ${LOG_FILE}
+    log "> uboot-${ARM_A_CORE}: building .."
+    make -j`nproc` ARCH=arm CROSS_COMPILE=${cross_compile} ${uboot_acore_defconfig} O=${UBOOT_DIR}/out/${ARM_A_CORE} &>>"${LOG_FILE}"
+    make -j`nproc` ARCH=arm CROSS_COMPILE=${cross_compile} BL31=${TFA_DIR}/build/k3/${platform}/release/bl31.bin TEE=${OPTEE_DIR}/out/arm-plat-k3/core/tee-pager_v2.bin BINMAN_INDIRS=${FW_DIR} O=${UBOOT_DIR}/out/${ARM_A_CORE} &>>"${LOG_FILE}"
+    cp ${UBOOT_DIR}/out/${ARM_A_CORE}/tispl.bin ${topdir}/build/${build}/tisdk-debian-${distro}-${bsp_version}-boot/ &>> ${LOG_FILE}
+    cp ${UBOOT_DIR}/out/${ARM_A_CORE}/u-boot.img ${topdir}/build/${build}/tisdk-debian-${distro}-${bsp_version}-boot/ &>> ${LOG_FILE}
 
 	case ${machine} in
 		am62pxx-evm | am62xx-evm | am62xx-lp-evm | am62xxsip-evm)
diff --git a/scripts/build_distroiGOS.sh b/scripts/build_distroiGOS.sh
index e074e79..966c789 100755
--- a/scripts/build_distroiGOS.sh
+++ b/scripts/build_distroiGOS.sh
@@ -33,8 +33,11 @@ bsp_version=$2
     cp -ra ../fs/ tisdk-debian-${distro}-${bsp_version}-rootfs
 
     log "> Cleaning up ${build}"
-    tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-rootfs.tar.xz tisdk-debian-${distro}-${bsp_version}-rootfs &>>"${LOG_FILE}"
-    rm -rf tisdk-debian-${distro}-rootfs
+#    If we tar file system, it cause to be missing special file capabilities. (by Dennis Kong).
+#    So we will not tar it and copy the folder to SD card directly (Inside "create-sdcardiGOS.sh" line 715)
+#    refer to commit 351c0c1cbc1189fb659295251674e51799dd8be4
+#    tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-rootfs.tar.xz tisdk-debian-${distro}-${bsp_version}-rootfs &>>"${LOG_FILE}"
+#    rm -rf tisdk-debian-${distro}-${bsp_version}-rootfs
 
     tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-boot.tar.xz tisdk-debian-${distro}-${bsp_version}-boot &>>"${LOG_FILE}"
     rm -rf tisdk-debian-${distro}-${bsp_version}-boot

From be10d5eb6c177e9ec4def790932e2ce1bc278fa8 Mon Sep 17 00:00:00 2001
From: Dennis Kong <dkong@perle.com>
Date: Fri, 21 Feb 2025 14:43:29 -0500
Subject: [PATCH 7/7] Changes to squash and save boot and rootfs images to
 per-target folders and to use them when burning  an sdcard

---
 create-sdcardiGOS.sh        | 14 ++++++++------
 scripts/build_distroiGOS.sh | 12 ++++++++++--
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/create-sdcardiGOS.sh b/create-sdcardiGOS.sh
index 4f4e953..25049e1 100755
--- a/create-sdcardiGOS.sh
+++ b/create-sdcardiGOS.sh
@@ -48,7 +48,7 @@ EXEPATH="$PWD"/"$EXE"
 clear
 
 build=${1}
-PARSEPATH=./build/${build}
+PARSEPATH=./images/${build}
 
 cat << EOM
 
@@ -691,9 +691,9 @@ sync
 sync
 
 build=*
-BOOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-boot.tar.xz"
-ROOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-rootfs.tar.xz"
-ROOTFSPATH="$PARSEPATH/tisdk-debian-${build}-rootfs/*"
+BOOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-boot.squashfs"
+ROOTFILEPATH="$PARSEPATH/tisdk-debian-${build}-rootfs.squashfs"
+# ROOTFSPATH="$PARSEPATH/tisdk-debian-${build}-rootfs/*"
 
 cat << EOM
 ################################################################################
@@ -706,13 +706,15 @@ Copying boot partition
 EOM
 
 
-untar_progress $BOOTFILEPATH $PATH_TO_SDBOOT
+# untar_progress $BOOTFILEPATH $PATH_TO_SDBOOT
+unsquashfs -d $PATH_TO_SDBOOT $BOOTFILEPATH
 echo ""
 
 sync
 
 echo "Copying rootfs System partition"
-rsync -aHAX $ROOTFSPATH $PATH_TO_SDROOTFS
+# rsync -aHAX $ROOTFSPATH $PATH_TO_SDROOTFS
+unsquashfs -d $PATH_TO_SDROOTFS $ROOTFILEPATH
 
 echo ""
 echo ""
diff --git a/scripts/build_distroiGOS.sh b/scripts/build_distroiGOS.sh
index 966c789..06a12cb 100755
--- a/scripts/build_distroiGOS.sh
+++ b/scripts/build_distroiGOS.sh
@@ -28,6 +28,7 @@ function package_and_clean() {
 build=$1
 bsp_version=$2
 
+    mkdir -p ${topdir}/images/${build}
     cd ${topdir}/build/${build}
     rm -rf tisdk-debian-${distro}-${bsp_version}-rootfs
     cp -ra ../fs/ tisdk-debian-${distro}-${bsp_version}-rootfs
@@ -39,8 +40,15 @@ bsp_version=$2
 #    tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-rootfs.tar.xz tisdk-debian-${distro}-${bsp_version}-rootfs &>>"${LOG_FILE}"
 #    rm -rf tisdk-debian-${distro}-${bsp_version}-rootfs
 
-    tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-boot.tar.xz tisdk-debian-${distro}-${bsp_version}-boot &>>"${LOG_FILE}"
-    rm -rf tisdk-debian-${distro}-${bsp_version}-boot
+# latest changes to save the boot and rootfs inside squashfs files that preserve capabilites and file attrs and allows portability in burning an sdcard 
+    mksquashfs tisdk-debian-${distro}-${bsp_version}-rootfs tisdk-debian-${distro}-${bsp_version}-rootfs.squashfs -comp xz -noappend  &>>"${LOG_FILE}"
+    mv tisdk-debian-${distro}-${bsp_version}-rootfs.squashfs ${topdir}/images/${build}
+
+#   tar --use-compress-program="pigz --best --recursive | pv" -cf tisdk-debian-${distro}-${bsp_version}-boot.tar.xz tisdk-debian-${distro}-${bsp_version}-boot &>>"${LOG_FILE}"
+#   rm -rf tisdk-debian-${distro}-${bsp_version}-boot
+
+    mksquashfs tisdk-debian-${distro}-${bsp_version}-boot tisdk-debian-${distro}-${bsp_version}-boot.squashfs -comp xz -noappend &>>"${LOG_FILE}"
+    mv tisdk-debian-${distro}-${bsp_version}-boot.squashfs ${topdir}/images/${build}
 
     rm -rf bsp_sources