Bad idea? Power Control Options: Site Limit Control is enabled. #926
-
|
In HA is get this warning: I want to limit site power (solar inverter) export to grid, via "power limit" function and automation. Setting will update dynamically during the whole day. Works okay, but now just spotted this warning. Not sure what how to proceed. Please advice. |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 1 reply
-
|
It's a warning that appears in some SolarEdge documentation, so it's included in the integration. There's probably nothing to do about it other than to be aware that it could be a long term issue if you are frequently changing settings that the inverter saves across restarts. The exceptions are Active Power Limit and CosPhi which are dynamic commands that aren't stored in the inverter when it restarts. |
Beta Was this translation helpful? Give feedback.
-
|
Great, the Active Power Limit is what I'm using. |
Beta Was this translation helpful? Give feedback.
It's a warning that appears in some SolarEdge documentation, so it's included in the integration. There's probably nothing to do about it other than to be aware that it could be a long term issue if you are frequently changing settings that the inverter saves across restarts.
The exceptions are Active Power Limit and CosPhi which are dynamic commands that aren't stored in the inverter when it restarts.