configuration.yaml does not parse properly for HomeAssistant

[TaosEnergy]

From line 149 down (#Template Sensor) the file does not validate/ does not parse properly. There is some sort of syntax issue(s). I used codebeautify.org/yaml-validator

[LEECHER1]

Hey,

Thx i will check it, but the YAML files is only an example.

[guevara777]

The way MQTT-Entities are managed have changed since one of the last Home-Asstitant-Updates. I made a MQTT-Configuration myself and would like to share it with you. Feel free to use it:

I added this to my configuration.yaml
mqtt: !include mqtt.yaml

i added a mqtt.yaml-file with this content:
(in this configuration i created a DEVICE to which the entities belong)

# Pool Heizungssteuerung
climate:
- unique_id: intex_pool_hvac
  name: "Intex Pool"

  # Gerät
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  
  modes: 
    - "heat"
    - "auto"
  current_temperature_topic: "IntexSpa/Actual Temperature"
  temperature_command_topic: "IntexSpa/Cmd Temperature Setpoint"
  temperature_state_topic: "IntexSpa/Temperature Setpoint"
  
  payload_on: "1"
  payload_off: "0"
  payload_available: "1"
  payload_not_available: "0"
  
  mode_command_topic: "IntexSpa/CMD HVAC Modeset"
  mode_state_topic: "IntexSpa/CMD HVAC Modeset"
  mode_state_template: >-
    {% set values = { '1':'auto', '2':'heat',  '3':'cool', '0':'off'} %}
    {{ values[value] if value in values.keys() else 'off' }}
  mode_command_template: >-
    {% set values = { 'auto':'4', 'heat':'5',  'cool':'3', 'off':'0'} %}
    {{ values[value] if value in values.keys() else '4' }}

  max_temp: "40"
  min_temp: "10"


# Intex Pool ESP-Restart Button
button:
- unique_id: intex_pool_restart
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd Reset ESP
  payload_press: "reset"
  name: "Intex Pool Restart"
  entity_category: "config"
  device_class: "restart"

# Intex Pool Decrease SetTemp Button
- unique_id: intex_pool_decrease
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd decrease
  payload_press: "1"
  name: "Intex Pool Set Temp Decrease"

# Intex Pool Increase SetTemp Button
- unique_id: intex_pool_increase
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd increase
  payload_press: "1"
  name: "Intex Pool Set Temp Increase"

# Intex Pool Filter Time Input Select
select:
- unique_id: intex_pool_filter_setup_time_select
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd water filter time
  #state_topic: IntexSpa/filter setup time
  name: "Intex Pool Filter Setup Time Select"
  options:
    - "0"
    - "2"
    - "4"
    - "6"

# MQTT Pool Schalter
switch:
- unique_id: intex_pool_power_switch
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd Power on off
  state_topic: IntexSpa/Power on
  payload_on: "1"
  payload_off: "0"
  name: "Intex Pool Power"
  
- unique_id: intex_pool_filter_switch
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd water filter on off
  state_topic: IntexSpa/filter on
  payload_on: "1"
  payload_off: "0"
  name: "Intex Pool Filter"
  
- unique_id: intex_pool_bubble_switch
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd bubble on off
  state_topic: IntexSpa/Bubble on
  payload_on: "1"
  payload_off: "0"
  name: "Intex Pool Bubble"
  
- unique_id: intex_pool_heater_switch
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  command_topic: IntexSpa/Cmd heater on off
  state_topic: IntexSpa/heater on
  payload_on: "1"
  payload_off: "0"
  name: "Intex Pool Heat"

# MQTT Pool Sensoren
sensor:
- unique_id: intex_pool_status
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  name: "Intex Pool Status"
  state_topic: "IntexSpa/Error Number"
  unit_of_measurement: 'E'
- unique_id: intex_pool_actual_temperature
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  name: "Intex Pool Actual Temperature"
  state_topic: "IntexSpa/Actual Temperature"
  unit_of_measurement: '°c'
- unique_id: intex_pool_set_temperature
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  name: "Intex Pool Set Temperature"
  state_topic: "IntexSpa/Temperature Setpoint"
  unit_of_measurement: '°c'
- unique_id: intex_pool_heater_status
  device:
    identifiers:
      - "Intex Spa"
    manufacturer: "Intex"
    model: "SPA"
    name: "Intex Spa Pool"
  name: "Intex Pool Heater Status"
  state_topic: "IntexSpa/heater state"
  value_template: >
    {% if value|float == 0 %}
      aus
    {% elif value|float == 1 %}
      standby
    {% elif value|float == 2 %}
      an
    {% endif %}

# Intex Pool Binärsensoren
binary_sensor:
  - unique_id: intex_pool_pumpenkommunikation
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    name: "Intex Pool Pumpenkommunikation"
    state_topic: "IntexSpa/Communication with pump"
    payload_on: "1"
    payload_off: "0"
    device_class: connectivity

[LEECHER1]

Thanks :) what has changed? guevara777 ***@***.***> schrieb am Fr., 1. Juli 2022, 12:34:

…

The way MQTT-Entities are managed have changed since one of the last Home-Asstitant-Updates. I made a MQTT-Configuration myself and would like to share it with you. Feel free to use it: I added this to my configuration.yaml mqtt: !include mqtt.yaml i added a mqtt.yaml-file with this content: # Pool Heizungssteuerung climate: - unique_id: intex_pool_hvac name: "Intex Pool" # Gerät device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" modes: - "heat" - "auto" current_temperature_topic: "IntexSpa/Actual Temperature" temperature_command_topic: "IntexSpa/Cmd Temperature Setpoint" temperature_state_topic: "IntexSpa/Temperature Setpoint" payload_on: "1" payload_off: "0" payload_available: "1" payload_not_available: "0" mode_command_topic: "IntexSpa/CMD HVAC Modeset" mode_state_topic: "IntexSpa/CMD HVAC Modeset" mode_state_template: >- {% set values = { '1':'auto', '2':'heat', '3':'cool', '0':'off'} %} {{ values[value] if value in values.keys() else 'off' }} mode_command_template: >- {% set values = { 'auto':'4', 'heat':'5', 'cool':'3', 'off':'0'} %} {{ values[value] if value in values.keys() else '4' }} max_temp: "40" min_temp: "10" # Intex Pool ESP-Restart Button button: - unique_id: intex_pool_restart device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd Reset ESP payload_press: "reset" name: "Intex Pool Restart" entity_category: "config" device_class: "restart" # Intex Pool Decrease SetTemp Button - unique_id: intex_pool_decrease device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd decrease payload_press: "1" name: "Intex Pool Set Temp Decrease" # Intex Pool Increase SetTemp Button - unique_id: intex_pool_increase device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd increase payload_press: "1" name: "Intex Pool Set Temp Increase" # Intex Pool Filter Time Input Select select: - unique_id: intex_pool_filter_setup_time_select device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd water filter time #state_topic: IntexSpa/filter setup time name: "Intex Pool Filter Setup Time Select" options: - "0" - "2" - "4" - "6" # MQTT Pool Schalter switch: - unique_id: intex_pool_power_switch device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd Power on off state_topic: IntexSpa/Power on payload_on: "1" payload_off: "0" name: "Intex Pool Power" - unique_id: intex_pool_filter_switch device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd water filter on off state_topic: IntexSpa/filter on payload_on: "1" payload_off: "0" name: "Intex Pool Filter" - unique_id: intex_pool_bubble_switch device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd bubble on off state_topic: IntexSpa/Bubble on payload_on: "1" payload_off: "0" name: "Intex Pool Bubble" - unique_id: intex_pool_heater_switch device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" command_topic: IntexSpa/Cmd heater on off state_topic: IntexSpa/heater on payload_on: "1" payload_off: "0" name: "Intex Pool Heat" # MQTT Pool Sensoren sensor: - unique_id: intex_pool_status device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" name: "Intex Pool Status" state_topic: "IntexSpa/Error Number" unit_of_measurement: 'E' - unique_id: intex_pool_actual_temperature device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" name: "Intex Pool Actual Temperature" state_topic: "IntexSpa/Actual Temperature" unit_of_measurement: '°c' - unique_id: intex_pool_set_temperature device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" name: "Intex Pool Set Temperature" state_topic: "IntexSpa/Temperature Setpoint" unit_of_measurement: '°c' - unique_id: intex_pool_heater_status device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" name: "Intex Pool Heater Status" state_topic: "IntexSpa/heater state" value_template: > {% if value|float == 0 %} aus {% elif value|float == 1 %} standby {% elif value|float == 2 %} an {% endif %} # Intex Pool Binärsensoren binary_sensor: - unique_id: intex_pool_pumpenkommunikation device: identifiers: - "Intex Spa" manufacturer: "Intex" model: "SPA" name: "Intex Spa Pool" name: "Intex Pool Pumpenkommunikation" state_topic: "IntexSpa/Communication with pump" payload_on: "1" payload_off: "0" device_class: connectivity — Reply to this email directly, view it on GitHub <#44 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC3ZVOEPNDQIMJ7QCPY5NV3VR23CRANCNFSM5QAJ5NUQ> . You are receiving this because you commented.Message ID: ***@***.***>

[guevara777]

That has changed ;) -> https://www.home-assistant.io/blog/2022/06/01/release-20226/ -> See "Breaking Changes"

[rommess]

Hi guys, i'de like to share my "code" in the new format, as i seen many poeple having trouble. based on @guevara777 code.
work for me so far.
@Portos1327 maybe you're interested ? :)

mqtt:

  # Intex Pool ESP-Restart Button
  button:
  - unique_id: intex_pool_restart
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd Reset ESP
    payload_press: "reset"
    name: "Intex Pool Restart"
    entity_category: "config"
    device_class: "restart"
  
  # Intex Pool Decrease SetTemp Button
  - unique_id: intex_pool_decrease
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd decrease
    payload_press: "1"
    name: "Intex Pool Set Temp Decrease"
  
  # Intex Pool Increase SetTemp Button
  - unique_id: intex_pool_increase
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd increase
    payload_press: "1"
    name: "Intex Pool Set Temp Increase"
  
  # Select
  select:
  
  # Intex Pool Filter Time Input Select
  - unique_id: intex_pool_filter_setup_time_select
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd water filter time
    state_topic: IntexSpa/filter setup time
    name: "Intex Pool Filter Setup Time Select"
    options:
#      - "0"
      - "2"
      - "4"
      - "6"
  
  # Intex Pool Sanitizer Time Input Select
  - unique_id: intex_pool_sanitizer_setup_time_select
    device:
        identifiers:
          - "Intex Spa"
        manufacturer: "Intex"
        model: "SPA"
        name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd Sanitizer time
    state_topic: IntexSpa/Sanitizer setup time
    name: "Intex Pool Sanitizer Setup Time Select"
    options:
#        - "0"
        - "3"
        - "5"
        - "8"
  
  # MQTT Pool Schalter
  switch:
  
  - unique_id: intex_pool_power_switch
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd Power on off
    state_topic: IntexSpa/Power on
    payload_on: "1"
    payload_off: "0"
    name: "Intex Pool Power"
    
  - unique_id: intex_pool_filter_switch
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd water filter on off
    state_topic: IntexSpa/filter on
    payload_on: "1"
    payload_off: "0"
    name: "Intex Pool Filter"
    
  - unique_id: intex_pool_bubble_switch
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd bubble on off
    state_topic: IntexSpa/Bubble on
    payload_on: "1"
    payload_off: "0"
    name: "Intex Pool Bubble"
    
  - unique_id: intex_pool_heater_switch
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd heater on off
    state_topic: IntexSpa/heater on
    payload_on: "1"
    payload_off: "0"
    name: "Intex Pool Heat"

  - unique_id: intex_pool_water_jet_switch
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd water jet on off
    state_topic: IntexSpa/Water jet on
    payload_on: "1"
    payload_off: "0"
    name: "Intex Pool Water Jet"

  - unique_id: intex_pool_sanitizer_switch
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    command_topic: IntexSpa/Cmd sanitizer on off
    state_topic: IntexSpa/Sanitizer on
    payload_on: "1"
    payload_off: "0"
    name: "Intex Pool Sanitizer"

  # MQTT Pool Sensoren
  sensor:
  - unique_id: intex_pool_status
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    name: "Intex Pool Status"
    state_topic: "IntexSpa/Error Number"
    unit_of_measurement: 'E'
  - unique_id: intex_pool_actual_temperature
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    name: "Intex Pool Actual Temperature"
    state_topic: "IntexSpa/Actual Temperature"
    unit_of_measurement: '°c'
  - unique_id: intex_pool_set_temperature
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    name: "Intex Pool Set Temperature"
    state_topic: "IntexSpa/Temperature Setpoint"
    unit_of_measurement: '°c'
  - unique_id: intex_pool_heater_status
    device:
      identifiers:
        - "Intex Spa"
      manufacturer: "Intex"
      model: "SPA"
      name: "Intex Spa Pool"
    name: "Intex Pool Heater Status"
    state_topic: "IntexSpa/heater state"
    value_template: >
      {% if value|float == 0 %}
        off
      {% elif value|float == 1 %}
        standby
      {% elif value|float == 2 %}
        on
      {% endif %}

  # Intex Pool Binärsensoren
  binary_sensor:
    - unique_id: intex_pool_pumpenkommunikation
      device:
        identifiers:
          - "Intex Spa"
        manufacturer: "Intex"
        model: "SPA"
        name: "Intex Spa Pool"
      name: "Intex Pool Pumpenkommunikation"
      state_topic: "IntexSpa/Communication with pump"
      payload_on: "1"
      payload_off: "0"
      device_class: connectivity

[Portos1327]

hi rommess, thank you very much for your work I will look at what it looks like in Ha