SPA Intex (SB-HWF20)

[fnoir]

J'ai un SPA Intex modèle SB-HWF20 . De ce que j'ai compris il s'agit d'un modèle de 2021.

Quand j'essaye de faire la recherche du channel, malheureusement la led ne se met pas à clignoter rapidement (juste 1 fois par seconde).
J'ai vérifié le câblage, je me suis rapproché du spa mais rien n'y fait, impossible de récupérer le channel

Channel detection :

Le croquis utilise 267998 octets (20%) de l'espace de stockage de programmes. Le maximum est de 1310720 octets.
Les variables globales utilisent 13612 octets (4%) de mémoire dynamique, ce qui laisse 314068 octets pour les variables locales. Le maximum est de 327680 octets.
esptool.py v3.0-dev
Serial port COM12
Connecting........_____....._____....._____....._____.
Chip is ESP32-D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: c8:c9:a3:d2:da:d0
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Auto-detected Flash size: 4MB
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.1 seconds (effective 1024.0 kbit/s)...
Hash of data verified.
Compressed 18656 bytes to 12053...
Writing at 0x00001000... (100 %)
Wrote 18656 bytes (12053 compressed) at 0x00001000 in 1.1 seconds (effective 133.4 kbit/s)...
Hash of data verified.
Compressed 268112 bytes to 126046...
Writing at 0x00010000... (12 %)
Writing at 0x00014000... (25 %)
Writing at 0x00018000... (37 %)
Writing at 0x0001c000... (50 %)
Writing at 0x00020000... (62 %)
Writing at 0x00024000... (75 %)
Writing at 0x00028000... (87 %)
Writing at 0x0002c000... (100 %)
Wrote 268112 bytes (126046 compressed) at 0x00010000 in 11.7 seconds (effective 183.2 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 128...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (128 compressed) at 0x00008000 in 0.1 seconds (effective 346.1 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...

Sortie console :

Channel 0
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
[...]
Channel FC
Channel FD
Channel FE
Channel FFFFFFFF
Channel 0
Channel 1

Je suis disponible pour faire du debug si besoin.