diff --git a/arch/arm64/boot/dts/apple/t6050-j714s-display.dtsi b/arch/arm64/boot/dts/apple/t6050-j714s-display.dtsi index f14c7ab163e31..633b7b6d3cb23 100644 --- a/arch/arm64/boot/dts/apple/t6050-j714s-display.dtsi +++ b/arch/arm64/boot/dts/apple/t6050-j714s-display.dtsi @@ -1,11 +1,11 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * J714s external displays: DisplayPort alt mode on the left-front and right ports and USB4 - * DisplayPort tunnels on the right port. dcpext0 and dcpext2 drive the routes; dcpext1 and - * dcpext3 are their pairs for modes that need two pipelines. The left-back port (ATC0) is the - * debug port and is not described. Addresses and interrupts are from the J714sAP ADT. The boot - * loader hands each engine over: it enables the engine, its mailbox and DARTs, publishes its - * bandwidth scratch and adds its display DART to the display subsystem. + * J714s external displays: DisplayPort alt mode and USB4 DisplayPort tunnels on the left-front + * and right ports. dcpext0 and dcpext2 drive the routes; dcpext1 and dcpext3 are their pairs for + * modes that need two pipelines. The left-back port (ATC0) is the debug port and is not + * described. Addresses and interrupts are from the J714sAP ADT. The boot loader hands each engine + * over: it enables the engine, its mailbox and DARTs, publishes its bandwidth scratch and adds its + * display DART to the display subsystem. */ &dcpext1 { @@ -242,6 +242,13 @@ interrupt-names = "dpin0", "dpin1", "dpin2", "dpin3"; }; +/* The left-front router's DP IN interrupts (atc1-dpin0..3, as in the T6050 inventory and J716c) */ +&acio1 { + interrupts = , , + , ; + interrupt-names = "dpin0", "dpin1", "dpin2", "dpin3"; +}; + /* The right router's suppliers, disabled in the inventory */ &ps_atc2_cio { status = "okay";