From 7a4451c9ab58fa0bce485ddb3fc1ca43fd9dca6b Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:04:04 -0800 Subject: [PATCH 1/8] dt-bindings: arm: apple: apple,pmgr: add apple,t8152-pmgr The T8152 (M6) PMGR blocks are compatible with the T8103 ones. The J873 device tree already uses this compatible; document it. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml index 91ae5a3ce1bca..e2e75a8c29f13 100644 --- a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml +++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml @@ -46,6 +46,7 @@ properties: - apple,t8132-pmgr - apple,t8140-pmgr - apple,t8142-pmgr + - apple,t8152-pmgr - const: apple,t8103-pmgr - const: syscon - const: simple-mfd From 0271b017312a8f2fa878091347aa7c8495c69cfb Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:04:05 -0800 Subject: [PATCH 2/8] dt-bindings: power: apple,pmgr-pwrstate: add apple,t8152-pmgr-pwrstate The T8152 (M6) PMGR power state controls are compatible with the T8103 ones. The J873 device tree already uses this compatible; document it. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml index 6612c626e8a54..227c7b87416dd 100644 --- a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml +++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml @@ -90,6 +90,7 @@ properties: - apple,t8132-pmgr-pwrstate - apple,t8140-pmgr-pwrstate - apple,t8142-pmgr-pwrstate + - apple,t8152-pmgr-pwrstate - const: apple,t8103-pmgr-pwrstate reg: From b39ba54e9e530be0573215b2e8e3379dfb40d6bf Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:04:06 -0800 Subject: [PATCH 3/8] dt-bindings: i2c: apple,i2c: add apple,t8152-i2c The I2C controllers of T8152 (M6) are compatible with the T8103 ones. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- Documentation/devicetree/bindings/i2c/apple,i2c.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml index f2e16482d9218..c3a306b0c8ea4 100644 --- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml @@ -31,6 +31,7 @@ properties: - apple,t8122-i2c - apple,t8132-i2c - apple,t8140-i2c + - apple,t8152-i2c - const: apple,t8103-i2c - items: - enum: From 4b3528fb2aaed03c6f2683d613db7057d4584e02 Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:04:07 -0800 Subject: [PATCH 4/8] dt-bindings: watchdog: apple,wdt: add apple,t8152-wdt The T8152 (M6) watchdog is compatible with the T8103 one. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- Documentation/devicetree/bindings/watchdog/apple,wdt.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml index e321ee28733d1..9a6634e146d75 100644 --- a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml @@ -26,6 +26,7 @@ properties: - apple,t8132-wdt - apple,t8140-wdt - apple,t8142-wdt + - apple,t8152-wdt - const: apple,t8103-wdt - items: - enum: From 8fe9dff82ae389f395bf722ba4865c239814a4c1 Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:04:08 -0800 Subject: [PATCH 5/8] dt-bindings: pwm: apple,s5l-fpwm: add apple,t8152-fpwm The T8152 (M6) FPWM, which drives the keyboard backlight of the J804 MacBook Pro, is compatible with the S5L one. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml index f7dcfa5bb4d29..ed36aca8f7c29 100644 --- a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml +++ b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml @@ -22,6 +22,7 @@ properties: - apple,t8142-fpwm - apple,t8132-fpwm - apple,t8140-fpwm + - apple,t8152-fpwm - apple,t6000-fpwm - apple,t6020-fpwm - apple,t6030-fpwm From 8f740276316dbf30188da3f0ef3d20a343ac3e98 Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:04:09 -0800 Subject: [PATCH 6/8] dt-bindings: pinctrl: apple,pinctrl: allow T8152 with the T8140 fallback Reading every pin of the T8152 GPIO block to fill a register cache at probe takes an SError on the J804 MacBook Pro: pins 78 and 208 fault on an AP read. The T8140 profile accesses the block uncached and honours gpio-reserved-ranges, so a board that has to keep the CPU off such pins can use "apple,t8152-pinctrl", "apple,t8140-pinctrl", as T6050 does with its T8132 fallback. The existing T8103 fallback stays valid for boards that do not need it. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- .../devicetree/bindings/pinctrl/apple,pinctrl.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml index e2bec4d954de9..a2902c728bb32 100644 --- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml @@ -32,6 +32,12 @@ properties: - items: - const: apple,t6050-pinctrl - const: apple,t8132-pinctrl + - description: + T8152 with the uncached T8140 register access, for boards whose + gpio-reserved-ranges hold pins that fault on an AP read. + items: + - const: apple,t8152-pinctrl + - const: apple,t8140-pinctrl - items: # Do not add additional SoC to this list. - enum: From dd16da0b28a85809b72007f4b47957906d5bdb84 Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:04:10 -0800 Subject: [PATCH 7/8] dt-bindings: cpu: apple,t8140-cpuidle: add apple,t8152-cpuidle As on T8140, the OS cannot request core power-down on T8152 (M6) and WFI is the only idle state. Allow "apple,t8152-cpuidle" with the T8140 compatible as its fallback, which the driver already matches. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- .../bindings/cpu/apple,t8140-cpuidle.yaml | 22 +++++++++++-------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml b/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml index 9ffa89ece40cd..430e20dd605b4 100644 --- a/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml +++ b/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml @@ -4,26 +4,30 @@ $id: http://devicetree.org/schemas/cpu/apple,t8140-cpuidle.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Apple T6040, T8132 and T8140 CPU idle controller +title: Apple T6040, T8132, T8140 and T8152 CPU idle controller maintainers: - Ryan Murray description: - Selects the Apple CPU idle driver on T6040, T8132 and T8140 systems. On these - SoCs the hardware decides when an idle core is power-gated after WFI; - software cannot request core or cluster power-down, so WFI is the only - idle state. + Selects the Apple CPU idle driver on T6040, T8132, T8140 and T8152 systems. + On these SoCs the hardware decides when an idle core is power-gated after + WFI; software cannot request core or cluster power-down, so WFI is the only + idle state. T8152 uses the T8140 driver profile. properties: $nodename: const: cpuidle compatible: - enum: - - apple,t6041-cpuidle - - apple,t8132-cpuidle - - apple,t8140-cpuidle + oneOf: + - enum: + - apple,t6041-cpuidle + - apple,t8132-cpuidle + - apple,t8140-cpuidle + - items: + - const: apple,t8152-cpuidle + - const: apple,t8140-cpuidle required: - compatible From a96fb0778c158b79a93a2efea123b182143a626b Mon Sep 17 00:00:00 2001 From: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Date: Mon, 16 Nov 2026 09:05:21 -0800 Subject: [PATCH 8/8] arm64: dts: apple: t8152-j804: describe the MacBook Pro (M6) core board Turn the disabled J804 inventory into a board description for a RAM boot from the loader, on top of the shared T8152 description: - the twelve CPUs (the loader removes those it has not started), with the first two performance states of each cluster, which the cpufreq driver may use without a thermal policy, as on J873 - the AIC and the timer, the boot framebuffer and CPU idle - the SMC with its mailbox, the pcIO output that resets the trackpad's touch controller, and the hardware monitor: fan, power, voltage and current keys, with temperatures discovered. The fan is monitored only; its speed stays under firmware control - the watchdog, the GPIO controller with the pins that fault on an AP read reserved, the I2C controllers of the jack codec and the speaker amplifiers, and the keyboard backlight PWM - the boot NOR and the PMGR block from t8152-j873-qspi.dtsi, shared with J873, plus the SIO and I2C power states Everything else stays described and disabled; the storage, display, input, wireless and GPU nodes follow with their drivers. The values come from the J804 ADT. Tested on a MacBook Pro (M6, J804) with an equivalent standalone device tree on an earlier base (integration/aurora f5fa539): all twelve CPUs come up, the watchdog restarts the machine, the SMC hardware monitor reports about 170 inputs including the fan, the keyboard backlight lights, and the NVRAM partition of the boot NOR reads. This tree, rewritten onto the shared T8152 labels, has not been booted. Signed-off-by: LiamRay11 <228416644+LiamRay11@users.noreply.github.com> Co-Authored-By: Claude Opus 5.5 --- arch/arm64/boot/dts/apple/t8152-j804.dts | 369 ++++++++++++++++++++++- 1 file changed, 368 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/apple/t8152-j804.dts b/arch/arm64/boot/dts/apple/t8152-j804.dts index 82529cf4d9a33..773b06f95dae6 100644 --- a/arch/arm64/boot/dts/apple/t8152-j804.dts +++ b/arch/arm64/boot/dts/apple/t8152-j804.dts @@ -1,12 +1,379 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Pro (14-inch, M6), J804. + * + * Booted from RAM by the loader, which fills usable memory, the release + * addresses of the CPUs it started (and removes the others) and the boot + * framebuffer. The console is the framebuffer: the DockChannel UART has no + * reader on this board, so it stays disabled. Resources follow the J804 ADT. + */ /dts-v1/; #include "t8152.dtsi" +#include +#include / { - model = "Apple MacBook Pro (J804)"; compatible = "apple,j804", "apple,t8152", "apple,arm-platform"; + model = "Apple MacBook Pro (14-inch, M6)"; chassis-type = "laptop"; + + /* Retain the RAM handoff and secondary CPU park contract. */ + aurora,minimal-boot; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@0 { + compatible = "apple,simple-framebuffer", "simple-framebuffer"; + reg = <0 0 0 0>; /* Filled by the loader. */ + status = "disabled"; + }; + }; + + /* + * As on M4 and later, the OS cannot request core power-down: both idle + * states are WFI. The driver must be bound for s2idle to freeze the + * tick and suspend timekeeping. + */ + cpuidle { + compatible = "apple,t8152-cpuidle", "apple,t8140-cpuidle"; + }; + + /* + * The first two CPU performance states of each cluster, which the + * driver may use without a thermal policy, as on J873. + */ + m6_e_opp: opp-table-e { + compatible = "operating-points-v2"; + opp-shared; + + opp-972000000 { + opp-hz = /bits/ 64 <972000000>; + opp-level = <2>; + }; + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-level = <3>; + }; + }; + + m6_pm_opp: opp-table-pm { + compatible = "operating-points-v2"; + opp-shared; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-level = <2>; + }; + opp-1728000000 { + opp-hz = /bits/ 64 <1728000000>; + opp-level = <3>; + }; + }; + + /* Keyboard backlight: ADT fpwm0 kbd-backlight, 25 kHz. */ + led-controller { + compatible = "pwm-leds"; + + led-0 { + pwms = <&fpwm0 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = ; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +&{/reserved-memory} { + smc-firmware@30de00000 { + reg = <3 0x0de00000 0 0x120000>; + no-map; + }; +}; + +&cpu0 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu1 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu2 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu3 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu4 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu5 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu6 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu7 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu8 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu9 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu10 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu11 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&aic { + status = "okay"; +}; + +&{/timer} { + status = "okay"; +}; + +&{/soc} { + m6_e_cpufreq: performance-controller@210e20000 { + compatible = "apple,t8152-cluster-cpufreq"; + reg = <2 0x10e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + m6_pm_cpufreq: performance-controller@211e20000 { + compatible = "apple,t8152-cluster-cpufreq"; + reg = <2 0x11e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + smc_mbox: mailbox@30c710080 { + compatible = "apple,t8152-smc-mailbox"; + reg = <3 0x0c710080 0 0x80>; + interrupts = , + ; + interrupt-names = "send-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + + smc: smc@30c600000 { + compatible = "apple,t8152-smc"; + reg = <3 0x0c600000 0 0x74000>, + <3 0x0de00000 0 0x120000>; + reg-names = "smc", "sram"; + mboxes = <&smc_mbox>; + + /* + * pcIO outputs. The trackpad's AFE reset is the ADT multi-touch + * function-afe-reset pKW8('pcIO', 0x10000, 0x1c0000): line 0. + */ + smc_pcio: gpio { + compatible = "apple,smc-pcio-gpio"; + gpio-controller; + #gpio-cells = <2>; + apple,output-commands = /bits/ 64 <0x001c000000010000>; + }; + + smc_hwmon: hwmon { + compatible = "apple,smc-hwmon"; + apple,discover-temperatures; + + /* One fan; mode key in lower case on T8152. */ + fan-F0Ac { + apple,key-id = "F0Ac"; + apple,fan-minimum = "F0Mn"; + apple,fan-maximum = "F0Mx"; + apple,fan-target = "F0Tg"; + apple,fan-mode = "F0md"; + label = "Fan"; + }; + + power-PSTR { + apple,key-id = "PSTR"; + label = "Total System Power"; + }; + + power-PDTR { + apple,key-id = "PDTR"; + label = "AC Input Power"; + }; + + power-PMVR { + apple,key-id = "PMVR"; + label = "3.8 V Rail Power"; + }; + + power-PHPC { + apple,key-id = "PHPC"; + label = "Heatpipe Power"; + }; + + voltage-VD0R { + apple,key-id = "VD0R"; + label = "AC Input Voltage"; + }; + + voltage-SBAV { + apple,key-id = "SBAV"; + label = "Battery Voltage"; + }; + + current-ID0R { + apple,key-id = "ID0R"; + label = "AC Input Current"; + }; + }; + }; + + wdt: watchdog@3082b0000 { + compatible = "apple,t8152-wdt", "apple,t8103-wdt"; + reg = <3 0x082b0000 0 0x4000>; + clocks = <&clkref>; + interrupts = ; + }; + + pinctrl_ap: pinctrl@31a000000 { + /* + * Uncached (T8140 profile): a cache filled at probe would read + * pins 78 and 208, which fault on an AP read. + */ + compatible = "apple,t8152-pinctrl", "apple,t8140-pinctrl"; + reg = <0x3 0x1a000000 0x0 0x100000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_ap 0 0 224>; + apple,npins = <224>; + /* ADT no-restore-gpio-pins */ + gpio-reserved-ranges = <78 1>, <140 2>, <198 1>, <208 1>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + , + , + ; + }; + + /* The headphone jack codec. */ + i2c1: i2c@331014000 { + compatible = "apple,t8152-i2c", "apple,t8103-i2c"; + reg = <3 0x31014000 0 0x4000>; + clocks = <&clkref>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&ps_i2c1>; + resets = <&ps_i2c1>; + + /* Disabled until the sound card that uses it is described. */ + jack_codec: codec@4b { + compatible = "cirrus,cs42l84"; + reg = <0x4b>; + reset-gpios = <&pinctrl_ap 204 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&pinctrl_ap 203 IRQ_TYPE_LEVEL_LOW>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + }; + + /* The speaker amplifiers, described with the audio support. */ + i2c3: i2c@33101c000 { + compatible = "apple,t8152-i2c", "apple,t8103-i2c"; + reg = <3 0x3101c000 0 0x4000>; + clocks = <&clkref>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&ps_i2c3>; + resets = <&ps_i2c3>; + }; + + fpwm0: pwm@331040000 { + compatible = "apple,t8152-fpwm", "apple,s5l-fpwm"; + reg = <3 0x31040000 0 0x4000>; + clocks = <&clkref>; + #pwm-cells = <2>; + }; +}; + +/* The boot NOR (NVRAM) and the PMGR block, as on J873. */ +#include "t8152-j873-qspi.dtsi" + +&pmgr { + /* On at handoff; the I2C controllers below hang off it. */ + ps_sio: power-controller@840 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0x840 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio"; + apple,always-on; + }; + + ps_i2c1: power-controller@cc0 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0xcc0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c1"; + power-domains = <&ps_sio>; + }; + + ps_i2c3: power-controller@d00 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0xd00 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c3"; + power-domains = <&ps_sio>; + }; }; /* Unexposed chassis port instances remain described and disabled. */