diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml index 91ae5a3ce1bca..e2e75a8c29f13 100644 --- a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml +++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml @@ -46,6 +46,7 @@ properties: - apple,t8132-pmgr - apple,t8140-pmgr - apple,t8142-pmgr + - apple,t8152-pmgr - const: apple,t8103-pmgr - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml b/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml index 9ffa89ece40cd..430e20dd605b4 100644 --- a/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml +++ b/Documentation/devicetree/bindings/cpu/apple,t8140-cpuidle.yaml @@ -4,26 +4,30 @@ $id: http://devicetree.org/schemas/cpu/apple,t8140-cpuidle.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Apple T6040, T8132 and T8140 CPU idle controller +title: Apple T6040, T8132, T8140 and T8152 CPU idle controller maintainers: - Ryan Murray description: - Selects the Apple CPU idle driver on T6040, T8132 and T8140 systems. On these - SoCs the hardware decides when an idle core is power-gated after WFI; - software cannot request core or cluster power-down, so WFI is the only - idle state. + Selects the Apple CPU idle driver on T6040, T8132, T8140 and T8152 systems. + On these SoCs the hardware decides when an idle core is power-gated after + WFI; software cannot request core or cluster power-down, so WFI is the only + idle state. T8152 uses the T8140 driver profile. properties: $nodename: const: cpuidle compatible: - enum: - - apple,t6041-cpuidle - - apple,t8132-cpuidle - - apple,t8140-cpuidle + oneOf: + - enum: + - apple,t6041-cpuidle + - apple,t8132-cpuidle + - apple,t8140-cpuidle + - items: + - const: apple,t8152-cpuidle + - const: apple,t8140-cpuidle required: - compatible diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml index f2e16482d9218..c3a306b0c8ea4 100644 --- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml @@ -31,6 +31,7 @@ properties: - apple,t8122-i2c - apple,t8132-i2c - apple,t8140-i2c + - apple,t8152-i2c - const: apple,t8103-i2c - items: - enum: diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml index e2bec4d954de9..a2902c728bb32 100644 --- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml @@ -32,6 +32,12 @@ properties: - items: - const: apple,t6050-pinctrl - const: apple,t8132-pinctrl + - description: + T8152 with the uncached T8140 register access, for boards whose + gpio-reserved-ranges hold pins that fault on an AP read. + items: + - const: apple,t8152-pinctrl + - const: apple,t8140-pinctrl - items: # Do not add additional SoC to this list. - enum: diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml index 6612c626e8a54..227c7b87416dd 100644 --- a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml +++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml @@ -90,6 +90,7 @@ properties: - apple,t8132-pmgr-pwrstate - apple,t8140-pmgr-pwrstate - apple,t8142-pmgr-pwrstate + - apple,t8152-pmgr-pwrstate - const: apple,t8103-pmgr-pwrstate reg: diff --git a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml index f7dcfa5bb4d29..ed36aca8f7c29 100644 --- a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml +++ b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml @@ -22,6 +22,7 @@ properties: - apple,t8142-fpwm - apple,t8132-fpwm - apple,t8140-fpwm + - apple,t8152-fpwm - apple,t6000-fpwm - apple,t6020-fpwm - apple,t6030-fpwm diff --git a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml index e321ee28733d1..9a6634e146d75 100644 --- a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml @@ -26,6 +26,7 @@ properties: - apple,t8132-wdt - apple,t8140-wdt - apple,t8142-wdt + - apple,t8152-wdt - const: apple,t8103-wdt - items: - enum: diff --git a/arch/arm64/boot/dts/apple/t8152-j804.dts b/arch/arm64/boot/dts/apple/t8152-j804.dts index 82529cf4d9a33..20b034b81cc82 100644 --- a/arch/arm64/boot/dts/apple/t8152-j804.dts +++ b/arch/arm64/boot/dts/apple/t8152-j804.dts @@ -1,12 +1,502 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Pro (14-inch, M6), J804. + * + * Booted from RAM by the loader, which fills usable memory, the release + * addresses of the CPUs it started (and removes the others) and the boot + * framebuffer. The console is the framebuffer: the DockChannel UART has no + * reader on this board, so it stays disabled. Resources follow the J804 ADT. + */ /dts-v1/; #include "t8152.dtsi" +#include +#include / { - model = "Apple MacBook Pro (J804)"; compatible = "apple,j804", "apple,t8152", "apple,arm-platform"; + model = "Apple MacBook Pro (14-inch, M6)"; chassis-type = "laptop"; + + /* Retain the RAM handoff and secondary CPU park contract. */ + aurora,minimal-boot; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@0 { + compatible = "apple,simple-framebuffer", "simple-framebuffer"; + reg = <0 0 0 0>; /* Filled by the loader. */ + status = "disabled"; + }; + }; + + /* + * As on M4 and later, the OS cannot request core power-down: both idle + * states are WFI. The driver must be bound for s2idle to freeze the + * tick and suspend timekeeping. + */ + cpuidle { + compatible = "apple,t8152-cpuidle", "apple,t8140-cpuidle"; + }; + + /* + * The first two CPU performance states of each cluster, which the + * driver may use without a thermal policy, as on J873. + */ + m6_e_opp: opp-table-e { + compatible = "operating-points-v2"; + opp-shared; + + opp-972000000 { + opp-hz = /bits/ 64 <972000000>; + opp-level = <2>; + }; + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-level = <3>; + }; + }; + + m6_pm_opp: opp-table-pm { + compatible = "operating-points-v2"; + opp-shared; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-level = <2>; + }; + opp-1728000000 { + opp-hz = /bits/ 64 <1728000000>; + opp-level = <3>; + }; + }; + + /* Keyboard backlight: ADT fpwm0 kbd-backlight, 25 kHz. */ + led-controller { + compatible = "pwm-leds"; + + led-0 { + pwms = <&fpwm0 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = ; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +&{/reserved-memory} { + smc-firmware@30de00000 { + reg = <3 0x0de00000 0 0x120000>; + no-map; + }; +}; + +&cpu0 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu1 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu2 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu3 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu4 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu5 { + operating-points-v2 = <&m6_e_opp>; + performance-domains = <&m6_e_cpufreq>; + status = "okay"; +}; + +&cpu6 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu7 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu8 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu9 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu10 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&cpu11 { + operating-points-v2 = <&m6_pm_opp>; + performance-domains = <&m6_pm_cpufreq>; + status = "okay"; +}; + +&aic { + status = "okay"; +}; + +&{/timer} { + status = "okay"; +}; + +&{/soc} { + m6_e_cpufreq: performance-controller@210e20000 { + compatible = "apple,t8152-cluster-cpufreq"; + reg = <2 0x10e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + m6_pm_cpufreq: performance-controller@211e20000 { + compatible = "apple,t8152-cluster-cpufreq"; + reg = <2 0x11e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + smc_mbox: mailbox@30c710080 { + compatible = "apple,t8152-smc-mailbox"; + reg = <3 0x0c710080 0 0x80>; + interrupts = , + ; + interrupt-names = "send-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + + smc: smc@30c600000 { + compatible = "apple,t8152-smc"; + reg = <3 0x0c600000 0 0x74000>, + <3 0x0de00000 0 0x120000>; + reg-names = "smc", "sram"; + mboxes = <&smc_mbox>; + + /* + * pcIO outputs. The trackpad's AFE reset is the ADT multi-touch + * function-afe-reset pKW8('pcIO', 0x10000, 0x1c0000): line 0. + */ + smc_pcio: gpio { + compatible = "apple,smc-pcio-gpio"; + gpio-controller; + #gpio-cells = <2>; + apple,output-commands = /bits/ 64 <0x001c000000010000>; + }; + + smc_hwmon: hwmon { + compatible = "apple,smc-hwmon"; + apple,discover-temperatures; + + /* One fan; mode key in lower case on T8152. */ + fan-F0Ac { + apple,key-id = "F0Ac"; + apple,fan-minimum = "F0Mn"; + apple,fan-maximum = "F0Mx"; + apple,fan-target = "F0Tg"; + apple,fan-mode = "F0md"; + label = "Fan"; + }; + + power-PSTR { + apple,key-id = "PSTR"; + label = "Total System Power"; + }; + + power-PDTR { + apple,key-id = "PDTR"; + label = "AC Input Power"; + }; + + power-PMVR { + apple,key-id = "PMVR"; + label = "3.8 V Rail Power"; + }; + + power-PHPC { + apple,key-id = "PHPC"; + label = "Heatpipe Power"; + }; + + voltage-VD0R { + apple,key-id = "VD0R"; + label = "AC Input Voltage"; + }; + + voltage-SBAV { + apple,key-id = "SBAV"; + label = "Battery Voltage"; + }; + + current-ID0R { + apple,key-id = "ID0R"; + label = "AC Input Current"; + }; + }; + }; + + wdt: watchdog@3082b0000 { + compatible = "apple,t8152-wdt", "apple,t8103-wdt"; + reg = <3 0x082b0000 0 0x4000>; + clocks = <&clkref>; + interrupts = ; + }; + + pinctrl_ap: pinctrl@31a000000 { + /* + * Uncached (T8140 profile): a cache filled at probe would read + * pins 78 and 208, which fault on an AP read. + */ + compatible = "apple,t8152-pinctrl", "apple,t8140-pinctrl"; + reg = <0x3 0x1a000000 0x0 0x100000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_ap 0 0 224>; + apple,npins = <224>; + /* ADT no-restore-gpio-pins */ + gpio-reserved-ranges = <78 1>, <140 2>, <198 1>, <208 1>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + , + , + ; + }; + + /* The headphone jack codec. */ + i2c1: i2c@331014000 { + compatible = "apple,t8152-i2c", "apple,t8103-i2c"; + reg = <3 0x31014000 0 0x4000>; + clocks = <&clkref>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&ps_i2c1>; + resets = <&ps_i2c1>; + + /* Disabled until the sound card that uses it is described. */ + jack_codec: codec@4b { + compatible = "cirrus,cs42l84"; + reg = <0x4b>; + reset-gpios = <&pinctrl_ap 204 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&pinctrl_ap 203 IRQ_TYPE_LEVEL_LOW>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + }; + + /* The speaker amplifiers, described with the audio support. */ + i2c3: i2c@33101c000 { + compatible = "apple,t8152-i2c", "apple,t8103-i2c"; + reg = <3 0x3101c000 0 0x4000>; + clocks = <&clkref>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&ps_i2c3>; + resets = <&ps_i2c3>; + }; + + fpwm0: pwm@331040000 { + compatible = "apple,t8152-fpwm", "apple,s5l-fpwm"; + reg = <3 0x31040000 0 0x4000>; + clocks = <&clkref>; + #pwm-cells = <2>; + }; +}; + +/* The boot NOR (NVRAM) and the PMGR block, as on J873. */ +#include "t8152-j873-qspi.dtsi" + +&pmgr { + /* On at handoff; the I2C controllers below hang off it. */ + ps_sio: power-controller@840 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0x840 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio"; + apple,always-on; + }; + + /* + * The internal PCIe (apcie): ADT pmgr devices APCIE_GP +0x8c0 and its + * child APCIE_SYS_GP +0xec0. The loader trains the N1 link with them + * on; they stay on so the link is not dropped under the endpoint. + */ + ps_apcie_gp: power-controller@8c0 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0x8c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_gp"; + apple,always-on; + }; + + ps_i2c1: power-controller@cc0 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0xcc0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c1"; + power-domains = <&ps_sio>; + }; + + ps_i2c3: power-controller@d00 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0xd00 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c3"; + power-domains = <&ps_sio>; + }; + + ps_apcie_sys_gp: power-controller@ec0 { + compatible = "apple,t8152-pmgr-pwrstate", + "apple,t8103-pmgr-pwrstate"; + reg = <0xec0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_sys_gp"; + power-domains = <&ps_apcie_gp>; + apple,always-on; + }; +}; + +/* + * The N1 (Wi-Fi and Bluetooth) on apcie port 0. The J804 ADT's apcie, + * pci-bridge0 (PERST# GPIO 3, CLKREQ# GPIO 0, gen 3), its three centauri + * functions and dart-apcie0 match the J873g's, so the host and port come + * from the shared t8152-n1.dtsi; pcie0_dart is t8152.dtsi's. + */ +#include "t8152-n1.dtsi" + +/ { + aliases { + /* The loader fills the N1's factory addresses through these. */ + wifi0 = &n1_alpha; + bluetooth0 = &n1_beta; + }; +}; + +&pcie0_dart { + power-domains = <&ps_apcie_sys_gp>; + status = "okay"; +}; + +&pcie { + power-domains = <&ps_apcie_sys_gp>; +}; + +&port00 { + n1_alpha: wifi@0,1 { + reg = <0x10100 0x0 0x0 0x0 0x0>; + local-mac-address = [00 00 00 00 00 00]; + }; + + n1_beta: bluetooth@0,2 { + compatible = "pci106b,1903"; + reg = <0x10200 0x0 0x0 0x0 0x0>; + local-bd-address = [00 00 00 00 00 00]; + }; }; /* Unexposed chassis port instances remain described and disabled. */ + +/* + * The SD card reader (ADT pci-bridge2/pcie-sdreader, a GL9755) on apcie + * port 2, which the Mac mini does not have. The loader switches on its + * power (the ADT's SMC function-sd_pwr_en) and trains the link (pci-bridge2 + * maximum-link-speed 1). From the J804 ADT: port 2's registers and PHY + * lane, host interrupt 1587 (the third of apcie's per-port interrupts, the + * driver indexes them by port number), PERST# GPIO 5 and dart-apcie2. Its + * MSIs come from the host's shared range. + */ +&pcie { + reg = <0x1c 0xb0000000 0x0 0x1000000>, + <0x3 0x8c000000 0x0 0x4000>, + <0x3 0x88028000 0x0 0x4000>, + <0x3 0x8f010000 0x0 0x4000>, + <0x3 0x8a028000 0x0 0x4000>, + <0x3 0x8f018000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "phy0", "port2", "phy2"; + interrupts = , + , + ; + iommu-map = <0x100 &pcie0_dart 1 1>, + <0x101 &pcie0_dart 2 1>, + <0x102 &pcie0_dart 3 1>, + <0x200 &pcie2_dart 1 1>; + bus-range = <0 2>; + + /* PERST#: ADT pci-bridge2 function-perst, GPIO 5 */ + port02: pci@2,0 { + device_type = "pci"; + reg = <0x1000 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>; + max-link-speed = <1>; + bus-range = <2 2>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port02 0 0 0 0>, + <0 0 0 2 &port02 0 0 0 1>, + <0 0 0 3 &port02 0 0 0 2>, + <0 0 0 4 &port02 0 0 0 3>; + + /* Card detect and write protect active high (ADT *-polarity = 1) */ + sdhci0: mmc@0,0 { + compatible = "pci17a0,9755"; + reg = <0x20000 0x0 0x0 0x0 0x0>; + cd-inverted; + wp-inverted; + }; + }; +}; + +&pcie2_dart { + power-domains = <&ps_apcie_sys_gp>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8152-j873-n1.dtsi b/arch/arm64/boot/dts/apple/t8152-j873-n1.dtsi index ffa33863f782b..8a5e7e2f89e84 100644 --- a/arch/arm64/boot/dts/apple/t8152-j873-n1.dtsi +++ b/arch/arm64/boot/dts/apple/t8152-j873-n1.dtsi @@ -1,11 +1,9 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * J873g N1 on APCIE port 0. Aura releases the SMC-controlled N1 reset, - * initializes the common PHY and applies the inactive DART's tunables. - * Linux owns port training and the three function-specific DMA streams. - * Resources follow the J873g ADT and the public J873 PCIe bring-up tree. + * J873g N1 on APCIE port 0: the J873g's own GPIO controller and port-0 DART + * (the J873g tree does not include t8152.dtsi), then the shared apcie host + * and port 0 from t8152-n1.dtsi. */ -#include / { soc { @@ -33,46 +31,7 @@ #iommu-cells = <1>; interrupts = ; }; - - pcie: pcie@1cb0000000 { - compatible = "apple,t8152-pcie"; - device_type = "pci"; - reg = <0x1c 0xb0000000 0x0 0x1000000>, - <0x3 0x8c000000 0x0 0x4000>, - <0x3 0x88028000 0x0 0x4000>, - <0x3 0x8f010000 0x0 0x4000>; - reg-names = "config", "rc", "port0", "phy0"; - interrupts = ; - msi-controller; - msi-parent = <&pcie>; - msi-ranges = <&aic AIC_IRQ 1879 IRQ_TYPE_EDGE_RISING 32>; - iommu-map = <0x100 &pcie0_dart 1 1>, - <0x101 &pcie0_dart 2 1>, - <0x102 &pcie0_dart 3 1>; - iommu-map-mask = <0xffff>; - bus-range = <0 1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x43000000 0xb 0xc0000000 0xb 0xc0000000 0x0 0x20000000>, - <0x02000000 0x0 0x80000000 0xb 0x80000000 0x0 0x40000000>; - dma-coherent; - - port00: pci@0,0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - reset-gpios = <&pinctrl_ap 3 GPIO_ACTIVE_LOW>; - bus-range = <1 1>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &port00 0 0 0 0>, - <0 0 0 2 &port00 0 0 0 1>, - <0 0 0 3 &port00 0 0 0 2>, - <0 0 0 4 &port00 0 0 0 3>; - }; - }; }; }; + +#include "t8152-n1.dtsi" diff --git a/arch/arm64/boot/dts/apple/t8152-n1.dtsi b/arch/arm64/boot/dts/apple/t8152-n1.dtsi new file mode 100644 index 0000000000000..f4432d41c5932 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8152-n1.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * T8152 internal PCIe (apcie) with the N1 Wi-Fi/Bluetooth on port 0, shared + * by the boards that carry it (J873g, J804). Aura releases the SMC-controlled + * N1 reset, initializes the common PHY and applies the inactive DART's + * tunables. Linux owns port training and the three function-specific DMA + * streams. Resources follow the J873g ADT and the public J873 PCIe bring-up + * tree; the J804 ADT's apcie, pci-bridge0 and dart-apcie0 are the same. + * + * The including board provides pinctrl_ap and pcie0_dart. + */ +#include +#include +#include + +&{/soc} { + pcie: pcie@1cb0000000 { + compatible = "apple,t8152-pcie"; + device_type = "pci"; + reg = <0x1c 0xb0000000 0x0 0x1000000>, + <0x3 0x8c000000 0x0 0x4000>, + <0x3 0x88028000 0x0 0x4000>, + <0x3 0x8f010000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "phy0"; + interrupts = ; + msi-controller; + msi-parent = <&pcie>; + msi-ranges = <&aic AIC_IRQ 1879 IRQ_TYPE_EDGE_RISING 32>; + iommu-map = <0x100 &pcie0_dart 1 1>, + <0x101 &pcie0_dart 2 1>, + <0x102 &pcie0_dart 3 1>; + iommu-map-mask = <0xffff>; + bus-range = <0 1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x43000000 0xb 0xc0000000 0xb 0xc0000000 0x0 0x20000000>, + <0x02000000 0x0 0x80000000 0xb 0x80000000 0x0 0x40000000>; + dma-coherent; + + /* PERST#: ADT pci-bridge0 function-perst, GPIO 3 */ + port00: pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 3 GPIO_ACTIVE_LOW>; + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port00 0 0 0 0>, + <0 0 0 2 &port00 0 0 0 1>, + <0 0 0 3 &port00 0 0 0 2>, + <0 0 0 4 &port00 0 0 0 3>; + }; + }; +};