Flash eMMC thru boot menu fails with Samsung 256GB SD card

[jwinarske]

Describe the bug
Flash eMMC thru boot menu fails when using a Samsung 256 Pro Plus SD card. Selecting 2 ends up at (initramfs) prompt.

**Describe which image you are running (example: bone-debian-10.2-iot-armhf-2020-02-03-4gb.img.xz) **
bbai64-debian-11.7-minimal-arm64-2023-09-02-4gb.img

Describe your hardware
beaglebone ai64

Describe any Capes Installed
none

Please run this built-in script
sudo /opt/scripts/tools/version.sh

NA

To Reproduce
Steps to reproduce the behavior:

1. download bbai64-debian-11.7-minimal-arm64-2023-09-02-4gb.img
2. image Samsung 256 Pro Plus SD card on host machine
3. boot from SD card on beaglebone-ai64, select 2 to copy from SD card to eMMC

Expected behavior
that it updates the eMMC part

Additional context
Using a 64GB SD card it works as expected.

[jwinarske]

I can boot a headless Yocto image having imaged the same 256GB SD using bmaptool. So something used in the eMMC write sequence has a problem with large devices.

[RobertCNelson]

@jwinarske with your Yocto the build, it's using ti's 2023.04 u-boot correct?

I believe this is still related to our older 2021.01 ti branch, i've finished porting the Play over, i need to focus on the BBAI64's uboot.. Here's a quick test daily image with the newer version of u-boot.. https://rcn-ee.net/rootfs/debian-arm64-12-bookworm-minimal-v5.10-ti/2023-10-03/bbai64-ti-2023.04-debian-12.1-minimal-arm64-2023-10-03-6gb.img.xz

i'll add that card to my list on amazon, with the past u-boot, i had issues with Samsung 32GB EVO Select, and Samsung 64GB EVO Plus..

Side note, it could also be the 6.1 vs 5.10.x kernel...

[jwinarske]

Yocto build is using u-boot-ti-staging_2023.04 - 4750afef5b243ee780dcc53ad620aa4d7c610d4c
The association is buried in this file:
meta-ti/meta-ti-bsp/conf/machine/include/k3r5.inc (line 16)

If I have PCIe populated with a AW-CB375NF I get this:

U-Boot SPL 2021.01-gea96725b (Sep 02 2023 - 15:57:35 +0000)
Model: BeagleBoard.org BeagleBone AI-64 R5
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
Trying to boot from MMC1
init_env from device 17 not supported!
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9(release):v2.9.0
NOTICE:  BL31: Built : 15:57:35, Sep  2 2023
I/TC: 
I/TC: OP-TEE version: 3.22.0 (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 Sat Sep  2 15:57:35 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2021.01-gea96725b (Sep 02 2023 - 15:57:35 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
Trying to boot from MMC1


U-Boot 2021.01-gea96725b (Sep 02 2023 - 15:57:35 +0000)

SoC:   J721E SR1.1 GP
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
DRAM:  4 GiB
Flash: 0 Bytes
MMC:   sdhci@4f80000: 0, sdhci@4fb0000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Net:   Could not get PHY for ethernet@46000000port@1: addr 0
am65_cpsw_nuss_port ethernet@46000000port@1: phy_connect() failed
No ethernet found.

Press SPACE to abort autoboot in 2 seconds
board_name=[BBONEAI-64-B0-] ...
name_fdt=[k3-j721e-beagleboneai64.dtb] ...
MMC: no card present
mmc_init: -123, time 2002
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
728 bytes read in 7 ms (101.6 KiB/s)
BeagleBone AI-64 eMMC (extlinux.conf) Options
1:      BeagleBone AI-64 eMMC Recovery
2:      BeagleBone AI-64 copy eMMC to microSD
3:      BeagleBone AI-64 eMMC (default)
Enter choice: 3:        BeagleBone AI-64 eMMC (default)
Retrieving file: /initrd.img
15806797 bytes read in 92 ms (163.9 MiB/s)
Retrieving file: /Image
29616640 bytes read in 167 ms (169.1 MiB/s)
append: root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet init=/usr/sbin/init-beagle-flasher
Retrieving file: /k3-j721e-beagleboneai64.dtb
226922 bytes read in 9 ms (24 MiB/s)
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8f0ec000, end 8ffff14d ... OK
   Loading Device Tree to 000000008f0b1000, end 000000008f0eb669 ... OK

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[    0.727971] debugfs: Directory '31010000.pat' with parent 'regmap' already present!
[    0.728187] debugfs: Directory '31011000.pat' with parent 'regmap' already present!
[    0.728346] debugfs: Directory '31012000.pat' with parent 'regmap' already present!
[    0.728472] debugfs: Directory '31013000.pat' with parent 'regmap' already present!
[    0.728612] debugfs: Directory '31014000.pat' with parent 'regmap' already present!
[    1.093581] mdio_bus 46000f00.mdio: MDIO device at address 0 is missing.
[    1.258971] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19
[    1.517377] SError Interrupt on CPU0, code 0xbf000000 -- SError
[    1.517379] CPU: 0 PID: 80 Comm: kworker/0:3 Not tainted 5.10.168-ti-arm64-r111 #1bullseye
[    1.517381] Hardware name: BeagleBoard.org BeagleBone AI-64 (DT)
[    1.517382] Workqueue: events deferred_probe_work_func
[    1.517384] pstate: 20000085 (nzCv daIf -PAN -UAO -TCO BTYPE=--)
[    1.517385] pc : pci_generic_config_read+0x3c/0xe0
[    1.517386] lr : pci_generic_config_read+0x24/0xe0
[    1.517387] sp : ffff80001234b750
[    1.517388] x29: ffff80001234b750 x28: ffff000814e91800 
[    1.517390] x27: 0000000000000001 x26: 0000000000000000 
[    1.517393] x25: ffff000814e928e8 x24: 0000000000000000 
[    1.517395] x23: 0000000000000000 x22: 0000000000000000 
[    1.517396] x21: ffff80001234b864 x20: 0000000000000004 
[    1.517398] x19: ffff80001234b7c4 x18: 00000000fffffffb 
[    1.517400] x17: 000000007baad684 x16: 00000000a5e01e64 
[    1.517402] x15: 0000000000000020 x14: ffffffffffffffff 
[    1.517404] x13: ffff00081478ba1c x12: ffff00081478b29a 
[    1.517406] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f 
[    1.517408] x9 : ff72646268756463 x8 : 0000000000000729 
[    1.517410] x7 : ffff80001234b7a0 x6 : 0000000000000000 
[    1.517412] x5 : ffff000814e91800 x4 : 000000000000000b 
[    1.517414] x3 : 0000000000000001 x2 : ffff800017400008 
[    1.517417] x1 : 0000000000000000 x0 : ffff800012583000 
[    1.517419] Kernel panic - not syncing: Asynchronous SError Interrupt
[    1.517432] SMP: stopping secondary CPUs
[    1.517433] Kernel Offset: disabled
[    1.517434] CPU features: 0x28240022,20006008
[    1.517435] Memory Limit: none

Booting to rescue image at this point works, and I get wlan0 and bt working.

In this state if I remove the PCIe module, and let it boot this is what I get:

U-Boot SPL 2021.01-gea96725b (Sep 02 2023 - 15:57:35 +0000)
Model: BeagleBoard.org BeagleBone AI-64 R5
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
Trying to boot from MMC1
init_env from device 17 not supported!
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9(release):v2.9.0
NOTICE:  BL31: Built : 15:57:35, Sep  2 2023
I/TC: 
I/TC: OP-TEE version: 3.22.0 (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 Sat Sep  2 15:57:35 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2021.01-gea96725b (Sep 02 2023 - 15:57:35 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
Trying to boot from MMC1


U-Boot 2021.01-gea96725b (Sep 02 2023 - 15:57:35 +0000)

SoC:   J721E SR1.1 GP
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
DRAM:  4 GiB
Flash: 0 Bytes
MMC:   sdhci@4f80000: 0, sdhci@4fb0000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment

--------------------------------------------------------------------------------
Version: [1.20230710.0, add swap to non-swap to swap...]
--------------------------------------------------------------------------------
cat /etc/default/beagle-flasher:
--------------------------------------------------------------------------------
source=/dev/mmcblk0
destination=/dev/mmcblk1
rfs_partition=dual
rfs_boot_startmb=1
rfs_boot_size_mb=256
flash_back=/opt/u-boot/bb-u-boot-beagleboneai64/bbai64-microsd-to-emmc
extlinux=/opt/u-boot/bb-u-boot-beagleboneai64/microsd-extlinux.conf
--------------------------------------------------------------------------------
INFO: Giving system time to stablize...
--------------------------------------------------------------------------------
5
4
3
2
1
--------------------------------------------------------------------------------
INFO: Preparing /tmp
INFO: [mount -t tmpfs tmpfs /tmp]
--------------------------------------------------------------------------------
INFO: /proc/cmdline
INFO: [cat /proc/cmdline]
root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet init=/usr/sbin/init-beagle-flasher
------------------[   11.184644] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
[   11.193754] SMP: stopping secondary CPUs
[   11.197690] Kernel Offset: disabled
[   11.201185] CPU features: 0x28240022,20006008
[   11.205547] Memory Limit: none
[   11.208612] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200 ]---
--------------------------------------------------------------
INFO: [lsblk -i]
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk0      179:0    0 14.6G  0 disk 
|-mmcblk0p1  179:1    0  256M  0 part 
`-mmcblk0p2  179:2    0 14.4G  0 part /
mmcblk0boot0 179:256  0    4M  1 disk 
mmcblk0boot1 179:512  0    4M  1 disk 
--------------------------------------------------------------------------------
INFO: copying [/dev/mmcblk0] -> [/dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: [source=/dev/mmcblk0] is a valid block device
ERROR: [destination=/dev/mmcblk1] does not exist
--------------------------------------------------------------------------------
Example: /etc/default/beagle-flasher
--------------------------------------------------------------------------------
source=/dev/mmcblk0
destination=/dev/mmcblk1
rfs_partition=dual
rfs_boot_startmb=1
rfs_boot_size_mb=256
bootloader=/opt/u-boot/bb-u-boot-beagleboneai64/install-emmc.sh
flash_back=bbai64-emmc-to-microsd
extlinux=/opt/u-boot/bb-u-boot-beagleboneai64/emmc-extlinux.conf
--------------------------------------------------------------------------------

After this the only way to a working kernel is to boot selecting BeagleBone AI-64 eMMC Recovery. With or without PCIe module installed

1:      BeagleBone AI-64 eMMC Recovery
Retrieving file: /initrd.img
15806797 bytes read in 93 ms (162.1 MiB/s)
Retrieving file: /Image
29616640 bytes read in 167 ms (169.1 MiB/s)
append: root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0
Retrieving file: /k3-j721e-beagleboneai64.dtb
226922 bytes read in 9 ms (24 MiB/s)
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8f0ec000, end 8ffff14d ... OK
   Loading Device Tree to 000000008f0b1000, end 000000008f0eb669 ... OK

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[    0.000000] Linux version 5.10.168-ti-arm64-r111 (voodoo@AM69-SK-32g-01) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP Tue Sep 23
[    0.000000] Machine model: BeagleBoard.org BeagleBone AI-64
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 31 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-c66-dma-memory@a8000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-c66-memory@a8100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-c66-dma-memory@a9000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a9100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-c66-memory@a9100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000aa000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@aa000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000aa100000, size 79 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-c71-memory@aa100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000b2000000, size 96 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@b2000000, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000d8000000, size 560 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@d8000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000fb000000, size 8 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-queues@fb000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000fb800000, size 24 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-buffers@fb800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000008ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000009e7fffff]
[    0.000000]   node   0: [mem 0x000000009e800000-0x00000000aeffffff]
[    0.000000]   node   0: [mem 0x00000000af000000-0x00000000afffffff]
[    0.000000]   node   0: [mem 0x00000000b0000000-0x00000000b7ffffff]
[    0.000000]   node   0: [mem 0x00000000b8000000-0x00000000d7ffffff]
[    0.000000]   node   0: [mem 0x00000000d8000000-0x00000000fcffffff]
[    0.000000]   node   0: [mem 0x00000000fd000000-0x00000000ffffffff]
[    0.000000]   node   0: [mem 0x0000000880000000-0x000000088fffffff]
[    0.000000]   node   0: [mem 0x0000000890000000-0x00000008ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[    0.000000] cma: Reserved 144 MiB at 0x0000000095800000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 32 pages/cpu s92824 r8192 d30056 u131072
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: EL2 vector hardening
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: detected: ARM erratum 1742098
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
[    0.000000] Kernel command line: root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000091800000-0x0000000095800000] (64MB)
[    0.000000] Memory: 2062936K/4194304K available (17280K kernel code, 2298K rwdata, 5420K rodata, 3776K init, 720K bss, 1983912K reserved, 147456K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 960 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[    0.000000] ITS [mem 0x01820000-0x0182ffff]
[    0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @890800000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000008900d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008900e0000
[    0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[    0.000002] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[    0.000392] Console: colour dummy device 80x25
[    0.000696] printk: console [tty0] enabled
[    0.000726] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[    0.000735] pid_max: default: 32768 minimum: 301
[    0.000873] LSM: Security Framework initializing
[    0.000900] Yama: becoming mindful.
[    0.000973] AppArmor: AppArmor initialized
[    0.000980] TOMOYO Linux initialized
[    0.001057] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.001083] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002146] rcu: Hierarchical SRCU implementation.
[    0.002712] Platform MSI: msi-controller@1820000 domain created
[    0.003177] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[    0.003327] EFI services will not be available.
[    0.003587] smp: Bringing up secondary CPUs ...
[    0.012291] Detected PIPT I-cache on CPU1
[    0.012312] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[    0.012322] GICv3: CPU1: using allocated LPI pending table @0x00000008900f0000
[    0.012358] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[    0.012415] smp: Brought up 1 node, 2 CPUs
[    0.012432] SMP: Total of 2 processors activated.
[    0.012438] CPU features: detected: 32-bit EL0 Support
[    0.012443] CPU features: detected: CRC32 instructions
[    0.012447] CPU features: detected: 32-bit EL1 Support
[    0.032213] CPU: All CPU(s) started at EL2
[    0.032261] alternatives: patching kernel code
[    0.032959] devtmpfs: initialized
[    0.046124] KASLR disabled due to lack of seed
[    0.046279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.046313] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.048685] pinctrl core: initialized pinctrl subsystem
[    0.049019] DMI not present or invalid.
[    0.049402] NET: Registered protocol family 16
[    0.050119] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.050223] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.050363] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.050390] audit: initializing netlink subsys (disabled)
[    0.050577] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
[    0.050825] thermal_sys: Registered thermal governor 'fair_share'
[    0.050828] thermal_sys: Registered thermal governor 'bang_bang'
[    0.050835] thermal_sys: Registered thermal governor 'step_wise'
[    0.050840] thermal_sys: Registered thermal governor 'user_space'
[    0.050844] thermal_sys: Registered thermal governor 'power_allocator'
[    0.051476] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.051526] ASID allocator initialised with 65536 entries
[    0.074175] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.074194] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.074199] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.074204] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.076320] cryptd: max_cpu_qlen set to 1000
[    0.078184] raid6: skip pq benchmark and using algorithm neonx8
[    0.078199] raid6: using neon recovery algorithm
[    0.078674] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x1bb6402f] Detected
[    0.078950] vsys_3v3: supplied by evm_12v0
[    0.079109] vsys_5v0: supplied by evm_12v0
[    0.079543] iommu: Default domain type: Translated 
[    0.079832] SCSI subsystem initialized
[    0.079932] usbcore: registered new interface driver usbfs
[    0.079949] usbcore: registered new interface driver hub
[    0.079965] usbcore: registered new device driver usb
[    0.080295] mc: Linux media interface: v0.10
[    0.080308] videodev: Linux video capture interface: v2.00
[    0.080350] pps_core: LinuxPPS API ver. 1 registered
[    0.080355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.080363] PTP clock support registered
[    0.080382] EDAC MC: Ver: 3.0.0
[    0.081280] NetLabel: Initializing
[    0.081291] NetLabel:  domain hash size = 128
[    0.081296] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.081327] NetLabel:  unlabeled traffic allowed by default
[    0.081613] clocksource: Switched to clocksource arch_sys_counter
[    0.398297] VFS: Disk quotas dquot_6.6.0
[    0.398353] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.398445] FS-Cache: Loaded
[    0.398651] CacheFiles: Loaded
[    0.398914] AppArmor: AppArmor Filesystem Enabled
[    0.402318] Carveout Heap: Exported 512 MiB at 0x00000000b8000000
[    0.402434] NET: Registered protocol family 2
[    0.402732] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.403966] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.404261] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.404601] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.404882] TCP: Hash tables configured (established 32768 bind 32768)
[    0.405165] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.405275] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.405356] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.405495] NET: Registered protocol family 1
[    0.406007] RPC: Registered named UNIX socket transport module.
[    0.406016] RPC: Registered udp transport module.
[    0.406020] RPC: Registered tcp transport module.
[    0.406024] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.406030] NET: Registered protocol family 44
[    0.406040] PCI: CLS 0 bytes, default 64
[    0.406154] Trying to unpack rootfs image as initramfs...
[    0.690530] Freeing initrd memory: 15436K
[    0.691198] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.691561] kvm [1]: IPA Size Limit: 44 bits
[    0.691959] kvm [1]: vgic-v2@6f020000
[    0.691981] kvm [1]: GIC system register CPU interface enabled
[    0.692024] kvm [1]: vgic interrupt IRQ9
[    0.692094] kvm [1]: Hyp mode initialized successfully
[    0.694376] Initialise system trusted keyrings
[    0.694472] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.696611] zbud: loaded
[    0.697931] NFS: Registering the id_resolver key type
[    0.697957] Key type id_resolver registered
[    0.697962] Key type id_legacy registered
[    0.698008] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.698014] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.698031] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.698462] fuse: init (API version 7.32)
[    0.719524] NET: Registered protocol family 38
[    0.719552] xor: measuring software checksum speed
[    0.720860]    8regs           :  7570 MB/sec
[    0.721958]    32regs          :  9101 MB/sec
[    0.723158]    arm64_neon      :  8234 MB/sec
[    0.723162] xor: using function: 32regs (9101 MB/sec)
[    0.723172] Key type asymmetric registered
[    0.723177] Asymmetric key parser 'x509' registered
[    0.723209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.723286] io scheduler mq-deadline registered
[    0.724927] pinctrl-single 4301c000.pinctrl: 94 pins, size 376
[    0.725195] pinctrl-single 11c000.pinctrl: 173 pins, size 692
[    0.728669] ti-pat 31010000.pat: Found PAT Rev 1.0 with 16384 pages
[    0.728704] debugfs: Directory '31010000.pat' with parent 'regmap' already present!
[    0.728899] ti-pat 31011000.pat: Found PAT Rev 1.0 with 16384 pages
[    0.728926] debugfs: Directory '31011000.pat' with parent 'regmap' already present!
[    0.729042] ti-pat 31012000.pat: Found PAT Rev 1.0 with 16384 pages
[    0.729059] debugfs: Directory '31012000.pat' with parent 'regmap' already present!
[    0.729177] ti-pat 31013000.pat: Found PAT Rev 1.0 with 2048 pages
[    0.729189] debugfs: Directory '31013000.pat' with parent 'regmap' already present!
[    0.729335] ti-pat 31014000.pat: Found PAT Rev 1.0 with 2048 pages
[    0.729352] debugfs: Directory '31014000.pat' with parent 'regmap' already present!
[    0.731250] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[    0.733379] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf)
[    0.733798] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq
[    0.734022] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq
[    0.735696] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs
[    0.740323] brd: module loaded
[    0.877653] loop: module loaded
[    0.878332] megasas: 07.714.04.00-rc1
[    0.880716] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    0.880732] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.880768] sky2: driver version 1.30
[    0.881447] VFIO - User Level meta-driver version: 0.3
[    0.881975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.881994] ehci-pci: EHCI PCI platform driver
[    0.882939] i2c /dev entries driver
[    0.883081] Driver for 1-wire Dallas network protocol.
[    0.883108] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    0.884093] sdhci: Secure Digital Host Controller Interface driver
[    0.884099] sdhci: Copyright(c) Pierre Ossman
[    0.884290] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.885130] ledtrig-cpu: registered to indicate activity on CPUs
[    0.885346] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.885500] hid: raw HID events driver (C) Jiri Kosina
[    0.885702] usbcore: registered new interface driver usbhid
[    0.885708] usbhid: USB HID core driver
[    0.886175] optee: probing for conduit method.
[    0.886197] optee: revision 3.22 (001ace66)
[    0.902607] optee: dynamic shared memory is enabled
[    0.902827] optee: initialized driver
[    0.904322] NET: Registered protocol family 10
[    0.919742] Segment Routing with IPv6
[    0.919809] mip6: Mobile IPv6
[    0.919817] NET: Registered protocol family 17
[    0.919932] Key type dns_resolver registered
[    0.919938] mpls_gso: MPLS GSO support
[    0.920112] registered taskstats version 1
[    0.920122] Loading compiled-in X.509 certificates
[    0.920181] zswap: loaded using pool lzo/zbud
[    0.920308] Key type .fscrypt registered
[    0.920314] Key type fscrypt-provisioning registered
[    0.924127] Btrfs loaded, crc32c=crc32c-generic
[    0.924211] AppArmor: AppArmor sha1 policy hashing enabled
[    0.931613] ti-sci 44083000.dmsc: ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
[    0.981663] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz
[    0.982114] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz
[    0.983076] omap_i2c 42120000.i2c: bus 2 rev0.12 at 400 kHz
[    0.983611] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz
[    0.984424] omap_i2c 2010000.i2c: bus 4 rev0.12 at 400 kHz
[    0.984935] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz
[    0.985398] omap_i2c 2050000.i2c: bus 6 rev0.12 at 400 kHz
[    0.986213] ti-sci-intr bus@100000:bus@28380000:interrupt-controller2: Interrupt Router 137 domain created
[    0.986329] ti-sci-intr bus@100000:interrupt-controller0: Interrupt Router 131 domain created
[    0.986420] ti-sci-intr bus@100000:main-navss:interrupt-controller1: Interrupt Router 213 domain created
[    0.986586] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created
[    1.002090] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[    1.002119] j721e-pcie 2910000.pcie:       IO 0x0018001000..0x0018010fff -> 0x0018001000
[    1.002133] j721e-pcie 2910000.pcie:      MEM 0x0018011000..0x001fffffff -> 0x0018011000
[    1.002146] j721e-pcie 2910000.pcie:   IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[    1.003065] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
[    1.003076] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[    1.003082] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[    1.004798] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211
[    1.004811] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[    1.004817] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[    1.005357] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 15, base_baud = 6000000) is a 8250
[    1.005938] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 30, base_baud = 3000000) is a 8250
[    2.961736] printk: console [ttyS2] enabled
[    2.966919] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 31, base_baud = 3000000) is a 8250
[    2.975946] 2840000.serial: ttyS6 at MMIO 0x2840000 (irq = 32, base_baud = 3000000) is a 8250
[    2.992899] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0
[    3.000081] tidss 4a00000.dss: [drm] Cannot find any crtc or sizes
[    3.010491] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[    3.053615] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[    3.065478] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[    3.073828] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[    3.086635] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[    3.093847] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[    3.100210] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:0
[    3.110527] davinci_mdio c000f00.mdio: Configuring MDIO in manual mode
[    3.153613] davinci_mdio c000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[    3.161171] davinci_mdio c000f00.mdio: no live phy, scanning all
[    3.284106] davinci_mdio c000f00.mdio: phy[0]: device c000f00.mdio:00, driver unknown
[    3.292002] davinci_mdio c000f00.mdio: phy[1]: device c000f00.mdio:01, driver unknown
[    3.299818] davinci_mdio c000f00.mdio: phy[2]: device c000f00.mdio:02, driver unknown
[    3.307632] davinci_mdio c000f00.mdio: phy[3]: device c000f00.mdio:03, driver unknown
[    3.315446] davinci_mdio c000f00.mdio: phy[4]: device c000f00.mdio:04, driver unknown
[    3.323260] davinci_mdio c000f00.mdio: phy[5]: device c000f00.mdio:05, driver unknown
[    3.331075] davinci_mdio c000f00.mdio: phy[6]: device c000f00.mdio:06, driver unknown
[    3.338890] davinci_mdio c000f00.mdio: phy[7]: device c000f00.mdio:07, driver unknown
[    3.346703] davinci_mdio c000f00.mdio: phy[8]: device c000f00.mdio:08, driver unknown
[    3.354516] davinci_mdio c000f00.mdio: phy[9]: device c000f00.mdio:09, driver unknown
[    3.362331] davinci_mdio c000f00.mdio: phy[10]: device c000f00.mdio:0a, driver unknown
[    3.370231] davinci_mdio c000f00.mdio: phy[11]: device c000f00.mdio:0b, driver unknown
[    3.378132] davinci_mdio c000f00.mdio: phy[12]: device c000f00.mdio:0c, driver unknown
[    3.386032] davinci_mdio c000f00.mdio: phy[13]: device c000f00.mdio:0d, driver unknown
[    3.393933] davinci_mdio c000f00.mdio: phy[14]: device c000f00.mdio:0e, driver unknown
[    3.401836] davinci_mdio c000f00.mdio: phy[15]: device c000f00.mdio:0f, driver unknown
[    3.409738] davinci_mdio c000f00.mdio: phy[16]: device c000f00.mdio:10, driver unknown
[    3.417638] davinci_mdio c000f00.mdio: phy[17]: device c000f00.mdio:11, driver unknown
[    3.425539] davinci_mdio c000f00.mdio: phy[18]: device c000f00.mdio:12, driver unknown
[    3.433439] davinci_mdio c000f00.mdio: phy[19]: device c000f00.mdio:13, driver unknown
[    3.441340] davinci_mdio c000f00.mdio: phy[20]: device c000f00.mdio:14, driver unknown
[    3.449240] davinci_mdio c000f00.mdio: phy[21]: device c000f00.mdio:15, driver unknown
[    3.457141] davinci_mdio c000f00.mdio: phy[22]: device c000f00.mdio:16, driver unknown
[    3.465044] davinci_mdio c000f00.mdio: phy[23]: device c000f00.mdio:17, driver unknown
[    3.472944] davinci_mdio c000f00.mdio: phy[24]: device c000f00.mdio:18, driver unknown
[    3.480844] davinci_mdio c000f00.mdio: phy[25]: device c000f00.mdio:19, driver unknown
[    3.488745] davinci_mdio c000f00.mdio: phy[26]: device c000f00.mdio:1a, driver unknown
[    3.496645] davinci_mdio c000f00.mdio: phy[27]: device c000f00.mdio:1b, driver unknown
[    3.504546] davinci_mdio c000f00.mdio: phy[28]: device c000f00.mdio:1c, driver unknown
[    3.512446] davinci_mdio c000f00.mdio: phy[29]: device c000f00.mdio:1d, driver unknown
[    3.520346] davinci_mdio c000f00.mdio: phy[30]: device c000f00.mdio:1e, driver unknown
[    3.528247] davinci_mdio c000f00.mdio: phy[31]: device c000f00.mdio:1f, driver unknown
[    3.536219] am65-cpsw-nuss c000000.ethernet: initializing am65 cpsw nuss version 0x6BA01901, cpsw version 0x6BA80101 Ports: 9 quirks:00000000
[    3.548902] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19
[    3.562312] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0
[    3.573886] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.579406] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.587154] xhci-hcd xhci-hcd.0.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000010010
[    3.596545] xhci-hcd xhci-hcd.0.auto: irq 230, io mem 0x06410000
[    3.602650] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.608125] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.615770] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    3.622382] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.630638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.637868] usb usb1: Product: xHCI Host Controller
[    3.642735] usb usb1: Manufacturer: Linux 5.10.168-ti-arm64-r111 xhci-hcd
[    3.649507] usb usb1: SerialNumber: xhci-hcd.0.auto
[    3.654590] hub 1-0:1.0: USB hub found
[    3.658352] hub 1-0:1.0: 1 port detected
[    3.662446] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.670575] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    3.678823] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.686037] usb usb2: Product: xHCI Host Controller
[    3.690904] usb usb2: Manufacturer: Linux 5.10.168-ti-arm64-r111 xhci-hcd
[    3.697687] usb usb2: SerialNumber: xhci-hcd.0.auto
[    3.702751] hub 2-0:1.0: USB hub found
[    3.706506] hub 2-0:1.0: 1 port detected
[    3.813079] mmc0: CQHCI version 5.10
[    3.822012] gpio gpiochip2: gpio-line-names is length 37 but should be at most length 36
[    3.831096] vdd_mmc1: supplied by vsys_3v3
[    3.836094] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100
[    3.842950] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100
[    3.849813] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100
[    3.856655] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100
[    3.860700] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[    3.863483] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100
[    3.880913] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[    3.888424] j721e-pcie 2910000.pcie:       IO 0x0018001000..0x0018010fff -> 0x0018001000
[    3.896512] j721e-pcie 2910000.pcie:      MEM 0x0018011000..0x001fffffff -> 0x0018011000
[    3.904604] j721e-pcie 2910000.pcie:   IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[    3.917623] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.970049] mmc0: Command Queue Engine enabled
[    3.974494] mmc0: new HS200 MMC card at address 0001
[    3.979799] mmcblk0: mmc0:0001 TB2916 14.6 GiB 
[    3.984454] mmcblk0boot0: mmc0:0001 TB2916 partition 1 4.00 MiB
[    3.990504] mmcblk0boot1: mmc0:0001 TB2916 partition 2 4.00 MiB
[    3.996531] mmcblk0rpmb: mmc0:0001 TB2916 partition 3 4.00 MiB, chardev (236:0)
[    4.004855]  mmcblk0: p1 p2
[    4.069914] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[    4.078096] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    4.085218] usb 1-1: SerialNumber: A00308791EA6
[    4.090222] hub 1-1:1.0: USB hub found
[    4.093992] hub 1-1:1.0: 4 ports detected
[    4.197639] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    4.221846] usb 2-1: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
[    4.230016] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.237577] hub 2-1:1.0: USB hub found
[    4.241344] hub 2-1:1.0: 4 ports detected
[    4.385617] usb 1-1.2: new low-speed USB device number 3 using xhci-hcd
[    4.430084] Console: switching to colour frame buffer device 210x90
[    4.452679] tidss 4a00000.dss: [drm] fb0: tidssdrmfb frame buffer device
[    4.498830] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=2a4a, bcdDevice= 2.33
[    4.507209] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.514539] usb 1-1.2: Product: HP USB Slim Keyboard - Skylab (Liteon)
[    4.521083] usb 1-1.2: Manufacturer: Lite-On Technology Corp
[    4.535713] input: Lite-On Technology Corp HP USB Slim Keyboard - Skylab (Liteon) as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.0
[    4.613836] hid-generic 0003:03F0:2A4A.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp HP USB Slim Keyboard - Skylab (Liteon)] on usb-xhci-hcd.0.auto-1.2/inp0
[    4.634245] input: Lite-On Technology Corp HP USB Slim Keyboard - Skylab (Liteon) Consumer Control as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/us1
[    4.713727] input: Lite-On Technology Corp HP USB Slim Keyboard - Skylab (Liteon) System Control as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb12
[    4.734386] input: Lite-On Technology Corp HP USB Slim Keyboard - Skylab (Liteon) as /devices/platform/bus@100000/4114000.cdns-usb/6400000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.3
[    4.753811] hid-generic 0003:03F0:2A4A.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp HP USB Slim Keyboard - Skylab (Liteon)] on usb-xhci-hcd.0.auto-11
[    4.905737] j721e-pcie 2910000.pcie: PCI host bridge to bus 0000:00
[    4.912039] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.917542] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0x18001000-0x18010fff])
[    4.927052] pci_bus 0000:00: root bus resource [mem 0x18011000-0x1fffffff]
[    4.933970] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400
[    4.939998] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    4.949744] pci 0000:00:00.0: supports D1
[    4.953763] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    4.963886] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    4.975885] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    4.982555] pci 0000:00:00.0: PCI bridge to [bus 01]
[    4.987880] pcieport 0000:00:00.0: PME: Signaling with IRQ 504
[    4.993952] pcieport 0000:00:00.0: AER: enabled with IRQ 504
[    5.000667] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[    5.011706] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16)
[    5.024676] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[    5.069713] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[    5.081838] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[    5.090237] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[    5.103104] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[    5.110353] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[    5.116746] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:0
[    5.127421] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[    5.861557] mmc1: CQHCI version 5.10
[    5.861690] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present!
[    5.872449] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present!
[    5.881043] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present!
[    5.888399] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present!
[    5.895769] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present!
[    5.903110] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present!
[    5.911717] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    5.918661] of_cfs_init
[    5.921129] of_cfs_init: OK
[    7.379644] sdhci-am654 4fb0000.mmc: Power on failed
[    7.415203] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[    7.425205] Freeing unused kernel memory: 3776K
[    7.451210] Checked W+X mappings: passed, no W+X pages found
[    7.456939] Run /init as init process
Loading, please wait...
Starting version 247.3-7+deb11u4
[    8.316313] remoteproc remoteproc0: b034000.pru is available
[    8.322300] remoteproc remoteproc1: b004000.rtu is available
[    8.328296] remoteproc remoteproc2: b00a000.txpru is available
[    8.334413] remoteproc remoteproc3: b038000.pru is available
[    8.340416] remoteproc remoteproc4: b006000.rtu is available
[    8.346359] remoteproc remoteproc5: b00c000.txpru is available
[    8.366538] remoteproc remoteproc6: b134000.pru is available
[    8.375138] remoteproc remoteproc7: b104000.rtu is available
[    8.383562] remoteproc remoteproc8: b10a000.txpru is available
[    8.392131] remoteproc remoteproc9: b138000.pru is available
[    8.400471] remoteproc remoteproc10: b106000.rtu is available
[    8.408928] remoteproc remoteproc11: b10c000.txpru is available
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p2] fsck.ext4 -a -C0 /dev/mmcblk0p2 
rootfs: clean, 209385/942080 files, 2818569/3761920 blocks
done.
[    8.731506] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    8.830125] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    8.952244] systemd[1]: System time before build time, advancing clock.
[    8.982869] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +)
[    9.011690] systemd[1]: Detected architecture arm64.

Welcome to Debian GNU/Linux 11 (bullseye)!

[    9.022217] systemd[1]: Set hostname to <BeagleBone-AI64>.
[    9.232462] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management.
[    9.314938] systemd[1]: Queued start job for default target Graphical Interface.
[    9.325165] systemd[1]: Unnecessary job for /dev/bone/uart/0 was removed.
[    9.334662] systemd[1]: Unnecessary job for /sys/devices/platform/bus@100000/2800000.serial/tty/ttyS2 was removed.
[    9.348358] random: systemd: uninitialized urandom read (16 bytes read)
[    9.379387] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice    9.389719] random: systemd: uninitialized urandom read (16 bytes read)
m.
[    9.390730] systemd[1]: Created slice system-modprobe.slice.
[    9.410869] random: systemd: uninitialized urandom read (16 bytes read)
[  OK  ] Created slice system-modprobe.slice[    9.421055] systemd[1]: Created slice system-serial\x2dgetty.slice.
.
[  OK  ] Created slice system-serial\x2dgett[    9.435046] systemd[1]: Created slice User and Session Slice.
y.slice.
[  OK  ] Created slice User and Session Slic[    9.448035] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
e.
[  OK  ] Started Forward Password R…uests [    9.463815] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
to Wall Directory Watch.
[  OK  ] Set up automount Arbitrary…s File[    9.480826] systemd[1]: Reached target Remote File Systems.
 System Automount Point.
[    9.494380] systemd[1]: Reached target Slices.
[  OK  ] Reached target Remote File Systems   9.501573] systemd[1]: Reached target Swap.
[0m.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Swap.
[    9.516689] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    9.528945] systemd[1]: Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on fsck to fsckd communic[    9.543390] systemd[1]: Listening on initctl Compatibility Named Pipe.
ation Socket.
[  OK  ] Listening on initctl Compatibility [    9.558081] systemd[1]: Listening on Journal Audit Socket.
Named Pipe.
[  OK  ] Listening on Journal Audit Socket    9.572816] systemd[1]: Listening on Journal Socket (/dev/log).
0m.
[  OK  ] Listening on Journal Socket (/dev/l[    9.588038] systemd[1]: Listening on Journal Socket.
og).
[  OK  ] Listening on Journal Socket.
[    9.601404] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlin[    9.616424] systemd[1]: Listening on udev Control Socket.
k Socket.
[  OK  ] Listening on udev Control Socket    9.629549] systemd[1]: Listening on udev Kernel Socket.
m.
[  OK  ] Listening on udev Kernel Socket.
[    9.659341] systemd[1]: Mounting Huge Pages File System...
[    9.672168] systemd[1]: Mounting POSIX Message Queue File System...

         Mounting POSIX Message Queue File System..[    9.685895] systemd[1]: Mounting /sys/kernel/debug...
.
         Mounting /sys/kernel/debug...
[    9.702789] systemd[1]: Mounting Kernel Trace File System...
[    9.714464] systemd[1]: Starting Set the console keyboard layout...

         Starting Set the console keyboard layout..[    9.729308] systemd[1]: Starting Create list of static device nodes for the current kernel...
.
         Starting Create list of st…odes for the curr[    9.745814] systemd[1]: Starting Load Kernel Module configfs...
ent kernel...
         Starting Load Kernel Module configfs...
[    9.760050] systemd[1]: Starting Load Kernel Module drm...
[    9.774716] systemd[1]: Starting Load Kernel Module fuse...

[    9.790222] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.

[    9.802188] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    9.817420] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    9.830965] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    9.846192] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[    9.867621] systemd[1]: Starting Coldplug All udev Devices...
         Starting Coldplug All udev Devices...
[    9.888829] systemd[1]: Mounted Huge Pages File System.
[  OK  ] Mounted Huge Pages File System.[    9.902425] systemd[1]: Mounted POSIX Message Queue File System.

[    9.914192] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[  OK  ] Mounted POSIX Message Queue File Sy[    9.929147] systemd[1]: Mounted /sys/kernel/debug.
stem.
[  OK  ] Mounted /sys/kernel/debug.
[    9.937542] NET: Registered protocol family 36
[    9.941425] systemd[1]: Mounted Kernel Trace File System.
[  OK  ] Mounted Kernel Trace File System    9.959455] systemd[1]: Finished Set the console keyboard layout.
m.
[    9.975307] usbcore: registered new interface driver wpanusb
[  OK  ] Finished Set the console keyboard l[   10.010973] systemd[1]: Finished Create list of static device nodes for the current kernel.
ayout.
[  OK  ] Finished Create list of st… nodes[   10.027103] systemd[1]: modprobe@configfs.service: Succeeded.
 for the current kernel.
[   10.027685] systemd[1]: Finished Load Kernel Module configfs.
[   10.029057] gb_bootrom: module is from the staging directory, the quality is unknown, you have been warned.
[   10.029436] greybus: registered new driver bootrom
[   10.041863] gb_spilib: module is from the staging directory, the quality is unknown, you have been warned.
[   10.052904] gb_firmware: module is from the staging directory, the quality is unknown, you have been warned.
[   10.053565] greybus: registered new driver gb-firmware
[   10.074027] gb_gbphy: module is from the staging directory, the quality is unknown, you have been warned.
[   10.074468] greybus: registered new driver gbphy
[   10.087639] gb_gpio: module is from the staging directory, the quality is unknown, you have been warned.
[   10.088018] gb_gbphy: registered new driver gpio
[   10.089243] gb_hid: module is from the staging directory, the quality is unknown, you have been warned.
[  OK  ] Finished Load Kernel Module configf[   10.157907] greybus: registered new driver hid
s.
[   10.159678] systemd[1]: Started Journal Service.
[   10.170620] gb_i2c: module is from the staging directory, the quality is unknown, you have been warned.
[   10.190060] gb_gbphy: registered new driver i2c
[   10.192981] gb_log: module is from the staging directory, the quality is unknown, you have been warned.
[   10.209868] greybus: registered new driver log
[   10.218580] gb_loopback: module is from the staging directory, the quality is unknown, you have been warned.
[   10.219206] greybus: registered new driver loopback
[   10.233814] gb_raw: module is from the staging directory, the quality is unknown, you have been warned.
[  OK  ] Started Journal Service.
[   10.252061] greybus: registered new driver raw
;32m  OK  ] Finished Load Kernel Module drm.
[   10.264427] gb_spi: module is from the staging directory, the quality is unknown, you have been warned.
[   10.264741] gb_gbphy: registered new driver spi
[   10.266443] gb_uart: module is from the staging directory, the quality is unknown, you have been warned.
[   10.301244] gb_gbphy: registered new driver uart
[  OK  ] Finished Load Kernel Module fuse.
[  OK  ] Finished Remount Root and Kernel File Systems.
[  OK  ] Finished Load Kernel Modules.
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
[   10.352331] random: systemd-journal: uninitialized urandom read (16 bytes read)
[   10.369936] random: systemd: uninitialized urandom read (16 bytes read)
[   10.370286] systemd-journald[460]: Received client request to flush runtime journal.
         Starting Flush Journal to Persistent Storage...
         Starting Load/Save Random Seed...
[   10.400738] systemd-journald[460]: File /var/log/journal/7178ac7aa3ab4979a6fca6beab246f64/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   10.426273] random: systemd: uninitialized urandom read (16 bytes read)
         Starting Apply Kernel Variables...
         Starting Create System Users...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Finished Apply Kernel Variables.
[  OK  ] Finished Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Coldplug All udev Devices.
         Starting Helper to synchronize boot up for ifupdown...
[  OK  ] Finished Flush Journal to Persistent Storage.
[  OK  ] Finished Helper to synchronize boot up for ifupdown.
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Starting Rule-based Manage…for Device Events and Files...
[  OK  ] Started Rule-based Manager for Device Events and Files.
         Starting Show Plymouth Boot Screen...
         Starting Network Service...
[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Started Forward Password R…s to Plymouth Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Started Network Service.
[   11.024673] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[   11.036586] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[   11.434753] random: systemd: uninitialized urandom read (16 bytes read)
[   11.454148] random: systemd: uninitialized urandom read (16 bytes read)
[   11.558023] random: crng init done
[   11.563906] random: 68 urandom warning(s) missed due to ratelimiting
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Found device /dev/ttyS2.
[  OK  ] Reached target Hardware activated USB gadget.
[   11.753825] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node vision-apps-c66-dma-memory@a9000000
[   11.771276] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc
[   11.782222] k3-dsp-rproc 4d80800000.dsp: configured DSP for remoteproc mode
[   11.794777] k3-dsp-rproc 4d80800000.dsp: local reset is deasserted for device
[   11.809360] img_enc 4200000.video-encoder: encoder registered as /dev/video0
[   11.833463] pvrsrvkm: loading out-of-tree module taints kernel.
[   11.850549] remoteproc remoteproc12: 4d80800000.dsp is available
[   11.879877] remoteproc remoteproc12: powering up 4d80800000.dsp
[   11.888330] remoteproc remoteproc12: Booting fw image vision_apps_eaik/vx_app_rtos_linux_c6x_1.out, size 1461044
[  OK  ] Found device /dev/mmcblk0p1.
[   11.958421] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node vision-apps-c66-dma-memory@a8000000
[   11.960531] k3-dsp-rproc 4d80800000.dsp: booting DSP core using boot addr = 0xa8d9a000
         Mounting /boot/firmware...
[   12.011500] pvrsrvkm 4e20000000.gpu: More than one power domain for this GPU, gpu driver manages power domains
[   12.027765] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  OK  ] Mounted /boot/firmware.
[   12.054224] k3-dsp-rproc 4d81800000.dsp: configured DSP for remoteproc mode
[  OK  ] Reached target Local File Systems.
[   12.082797] k3-dsp-rproc 4d81800000.dsp: local reset is deasserted for device
         Starting Load AppArmor profiles...
         Starting Set console font and keymap...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Create Volatile Files and Directories...
[   12.120155] PVR_K:  483: Read BVNC 22.104.208.318 from HW device registers
[   12.130088] PVR_K:  483: RGX Device registered with BVNC 22.104.208.318
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
[  OK  ] Finished Set console font and keymap.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[   12.250285]  remoteproc12#vdev0buffer: assigned reserved memory node vision-apps-c66-dma-memory@a9000000
[   12.268321] remoteproc remoteproc13: 4d81800000.dsp is available
[   12.269737]  remoteproc12#vdev0buffer: registered virtio0 (type 7)
[   12.285343] remoteproc remoteproc12: remote processor 4d80800000.dsp is now up
[   12.301068] remoteproc remoteproc13: powering up 4d81800000.dsp
[   12.309474] remoteproc remoteproc13: Booting fw image vision_apps_eaik/vx_app_rtos_linux_c6x_2.out, size 1461012
[   12.318016] k3-dsp-rproc 64800000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@aa000000
[  OK  ] Finished Update UTMP about System Boot/Shutdown.
[   12.343883] k3-dsp-rproc 4d81800000.dsp: booting DSP core using boot addr = 0xa9d9a000
[   12.347600] audit: type=1400 audit(1687100157.392:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=578 comm="apparmor_parser"
[   12.384829] audit: type=1400 audit(1687100157.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=579 comm="apparmor_parser"
[   12.394238] img_dec 4300000.video-decoder: decoder registered as /dev/video1
[   12.402510] audit: type=1400 audit(1687100157.424:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=579 comm="apparmor_parser"
[   12.442031] [drm] Initialized pvr 1.15.6133109 20170530 for 4e20000000.gpu on minor 1
[   12.453021] audit: type=1400 audit(1687100157.480:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=589 comm="apparmor_parser"
[   12.470614] audit: type=1400 audit(1687100157.480:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=589 comm="apparmor_parser"
[   12.487988] audit: type=1400 audit(1687100157.480:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=589 comm="apparmor_parser"
[   12.505440] audit: type=1400 audit(1687100157.488:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/gpsd" pid=590 comm="apparmor_parser"
[   12.536095] audit: type=1400 audit(1687100157.580:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-sessi"
[   12.545676] k3-dsp-rproc 64800000.dsp: configured DSP for remoteproc mode
[   12.559967] audit: type=1400 audit(1687100157.580:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-sess"
[   12.569451] remoteproc remoteproc14: 64800000.dsp is available
[  OK  ] Finished Load AppArmor profiles[   12.614522]  remoteproc13#vdev0buffer: assigned reserved memory node vision-apps-c66-dma-memory@a8000000
.
[   12.628805]  remoteproc13#vdev0buffer: registered virtio1 (type 7)
[   12.637912] remoteproc remoteproc13: remote processor 4d81800000.dsp is now up
         Starting Raise network interfaces...
[   12.728102] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c
[   12.737999] remoteproc remoteproc14: powering up 64800000.dsp
[   12.746724] remoteproc remoteproc14: Booting fw image vision_apps_eaik/vx_app_rtos_linux_c7x_1.out, size 13242432
[   12.759903] remoteproc remoteproc14: unsupported resource 65538
[   12.775162] k3-dsp-rproc 64800000.dsp: booting DSP core using boot addr = 0xaa200000
[  OK  ] Finished Raise network interfaces.
[   12.831275]  remoteproc14#vdev0buffer: assigned reserved memory node vision-apps-c71-dma-memory@aa000000
[   12.844036]  remoteproc14#vdev0buffer: registered virtio2 (type 7)
[   12.853121] remoteproc remoteproc14: remote processor 64800000.dsp is now up
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Reached target Timers.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting Docker Socket for the API.
[  OK  ] Listening on GPS (Global P…ioning System) Daemon Sockets.
[  OK  ] Listening on Docker Socket for the API.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting BeagleBoard.org EDGEAI K3 R5...
         Starting BeagleBoard Generate Symlinks...
         Starting BeagleBoard.org USB gadgets...
[   13.032029] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[  OK  ] Started Regular background program [   13.053454] platform 41000000.r5f: configured R5F for IPC-only mode
processing daemon.
[   13.053829] platform 41000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000
[   13.054459] remoteproc remoteproc15: 41000000.r5f is available
[   13.054516] remoteproc remoteproc15: attaching to 41000000.r5f
[   13.054653] platform 41000000.r5f: R5F core initialized in IPC-only mode
[   13.054660]  remoteproc15#vdev0buffer: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000
[   13.054703]  remoteproc15#vdev0buffer: registered virtio3 (type 7)
[   13.054705] remoteproc remoteproc15: remote processor 41000000.r5f is now attached
[   13.058194] platform 5c00000.r5f: configured R5F for remoteproc mode
[  OK  ] Started D-Bus System Message Bus.
         Starting dphys-swapfile - …unt, and delete a swap file...
[   13.164700] platform 5c00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000
[   13.165800] remoteproc remoteproc16: 5c00000.r5f is available
[   13.166000] remoteproc remoteproc16: Direct firmware load for vision_apps_eaik/vx_app_rtos_linux_mcu2_0.dontload failed with error -2
[   13.166006] remoteproc remoteproc16: powering up 5c00000.r5f
[   13.166024] remoteproc remoteproc16: Direct firmware load for vision_apps_eaik/vx_app_rtos_linux_mcu2_0.dontload failed with error -2
[   13.166028] remoteproc remoteproc16: request_firmware failed: -2
[   13.175208] platform 5d00000.r5f: configured R5F for remoteproc mode
[   13.253724] platform 5d00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000
         Starting Remove Stale Onli…t4 Metadata Check[   13.267581] remoteproc remoteproc17: 5d00000.r5f is available
 Snapshots...
         Starting Initialize hardware monitoring sensors...
[   13.267981] remoteproc remoteproc17: Direct firmware load for vision_apps_eaik/vx_app_rtos_linux_mcu2_1.dontload failed with error -2
[   13.267989] remoteproc remoteproc17: powering up 5d00000.r5f
[   13.268009] remoteproc remoteproc17: Direct firmware load for vision_apps_eaik/vx_app_rtos_linux_mcu2_1.dontload failed with error -2
[   13.268013] remoteproc remoteproc17: request_firmware failed: -2
[   13.280822] platform 5e00000.r5f: configured R5F for remoteproc mode
[   13.281560] platform 5e00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a6000000
[   13.282347] remoteproc remoteproc18: 5e00000.r5f is available
[   13.282569] remoteproc remoteproc18: Direct firmware load for j7-main-r5f1_0-fw failed with error -2
[   13.282575] remoteproc remoteproc18: powering up 5e00000.r5f
[   13.282592] remoteproc remoteproc18: Direct firmware load for j7-main-r5f1_0-fw failed with error -2
[   13.282596] remoteproc remoteproc18: request_firmware failed: -2
[   13.282825] platform 5f00000.r5f: configured R5F for remoteproc mode
[   13.283492] platform 5f00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a7000000
[   13.284324] remoteproc remoteproc19: 5f00000.r5f is available
[   13.284851] remoteproc remoteproc19: Direct firmware load for j7-main-r5f1_1-fw failed with error -2
[   13.284859] remoteproc remoteproc19: powering up 5f00000.r5f
[   13.284876] remoteproc remoteproc19: Direct firmware load for j7-main-r5f1_1-fw failed with error -2
[   13.284879] remoteproc remoteproc19: request_firmware failed: -2
[   13.401814] at24 2-0050: supply vcc not found, using dummy regulator
         Starting System Logging Service...
         Starting User Login Management...
         Starting LSB: Start daemon at boot time...
         Starting Disk Manager...
         Starting WPA supplicant...
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Host and Network Nam[   13.542690] at24 2-0050: 512 byte 24c04 EEPROM, writable, 1 bytes/write
e Lookups.
[  OK  ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[  OK  ] Finished BeagleBoard Generate Symlinks.
[  OK  ] Finished Initialize hardware monitoring sensors.
[   13.821157] using random self ethernet address
[   13.828299] using random host ethernet address
[   13.839678] systemd-journald[460]: Failed to read journal file /var/log/journal/7178ac7aa3ab4979a6fca6beab246f64/user-1000.journal for rotation, trying to move it out of the way:y
[   13.899548] remoteproc remoteproc16: powering up 5c00000.r5f
[   13.903156] using random self ethernet address
[   13.903162] using random host ethernet address
[   13.909971] remoteproc remoteproc16: Booting fw image vision_apps_eaik_8.2/vx_app_rtos_linux_mcu2_0.out, size 572788
[   13.954064]  remoteproc16#vdev0buffer: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000
[   13.954169]  remoteproc16#vdev0buffer: registered virtio4 (type 7)
[   13.954174] remoteproc remoteproc16: remote processor 5c00000.r5f is now up
[   13.954543] remoteproc remoteproc17: powering up 5d00000.r5f
[   13.957458] remoteproc remoteproc17: Booting fw image vision_apps_eaik_8.2/vx_app_rtos_linux_mcu2_1.out, size 297932
[   13.980267] Mass Storage Function, version: 2009/09/11
[   14.009822]  remoteproc17#vdev0buffer: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000
[   14.015027] LUN: removable file: (no medium)
[   14.054419]  remoteproc17#vdev0buffer: registered virtio5 (type 7)
[  OK  ] Started System Logging Service.[   14.063117] remoteproc remoteproc17: remote processor 5d00000.r5f is now up

[   14.273900] Adding 2097148k swap on /var/swap.  Priority:-2 extents:3 across:2269180k SSFS
[  OK  ] Started BeagleBoard.org EDGEAI K3 R5.
[  OK  ] Finished dphys-swapfile - …mount, and delete a swap file.
[  OK  ] Started User Login Management.
[  OK  ] Started WPA supplicant.
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
         Starting containerd container runtime...
         Starting LSB: disk temperature monitoring daemon...
         Starting A high performanc… and a reverse proxy server...
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
         Starting Authorization Manager...
[  OK  ] Finished Permit User Sessions.
         Starting Light Display Manager...
         Starting Hold until boot process finishes up...
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Started Authorization Manager.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started LSB: Start daemon at boot time.
[   14.858329] PVR_K:  892: RGX Firmware image 'rgx.fw.22.104.208.318' loaded
[   14.893516] PVR_K:  892: Shader binary image 'rgx.sh.22.104.208.318' loaded
[   15.138663] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.138703] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.180811] aufs 5.10.140-20230828
[   15.535518] cdns-csi2rx: probe of 4504000.csi-bridge failed with error -22
[   15.579204] cdns-csi2rx: probe of 4514000.csi-bridge failed with error -22
[   15.676265] virtio_rpmsg_bus virtio0: rpmsg host is online
[   15.680497] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd
[   15.682219] virtio_rpmsg_bus virtio1: rpmsg host is online
[   15.690365] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd
[   15.694743] virtio_rpmsg_bus virtio2: rpmsg host is online
[   15.705949] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd
[   15.707247] virtio_rpmsg_bus virtio3: rpmsg host is online
[   15.719916] virtio_rpmsg_bus virtio4: rpmsg host is online
[   15.721574] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xd
[   15.725769] virtio_rpmsg_bus virtio5: rpmsg host is online
[   15.733007] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xe
[   15.752632] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xd
[   15.759922] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0x15
[   15.773427] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0xd
[   15.780748] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0x15
[   15.788036] virtio_rpmsg_bus virtio5: creating channel ti.ipc4.ping-pong addr 0xe
[   15.795679] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0x15
[   15.795799] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xe
[   15.795864] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0x15
[   15.795920] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xe
[   15.795972] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15
[   15.796025] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xe
[   15.814823] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xe
[   16.311270] audit: type=1400 audit(1696443139.411:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1034 comm="apparmor_parser"
[   16.492084] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   16.508887] Bridge firewalling registered
[   16.752013] Initializing XFRM netlink socket
[   19.084242] usb0: HOST MAC 34:08:e1:59:58:94
[   19.088547] usb0: MAC 34:08:e1:59:58:95
[   19.092813] usb1: HOST MAC 34:08:e1:59:58:96
[   19.097114] usb1: MAC 34:08:e1:59:58:97
[   19.820822] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[   19.821124] cdns-usb3 6000000.usb: timeout for waiting configuration set
[   19.874950] IPv6: ADDRCONF(NETDEV_CHANGE): usb1: link becomes ready
[   20.007402] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
[   20.064618] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!

Debian GNU/Linux 11 BeagleBone-AI64 ttyS2

BeagleBoard.org Debian Bullseye Xfce Image 2023-09-02
Support: https://bbb.io/debian
default username:password is [debian:temppwd]

BeagleBone-AI64 login: [   25.277992] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
[   33.018667] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
[   48.051999] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
[   77.687939] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!