JLCPCB reads the BOM with errors

[Nutty-69]

Hi

JLCPCB is incorrectly sizing to 0603 in resistor row R63 - R81.

For Example it has row R82 - R91 and R63 - R81

in the same part yet the BOM has it listed separate.

Many Thanks

[Nutty-69]

I have found more as below.

[bitfieldlabs]

Not sure I understand. The PCB version 3.0 uses a mix of 0402 and 0603 resistors. E.g., all even numbers between R62-R80 are 0603 resistors while the odd ones are 0402. I see them listed correctly in https://github.com/bitfieldlabs/afterglow/blob/master/afterglow_pcb_v30/gerber/afterglow_bom_jlc.csv...

[Nutty-69]

JLCPCB have merged C25804 onto more resistor numbers odd and even, your BOM is correct but JLCPCB is messing with it, see pic 1 & 2 R63 - R81 are too big.
Pic 3 R10 in fact all the resistors inbetween U5 - U10 are too small.
The BOM seems correct even though I had errors and had to add some manually with the part numbers. (I did not add the resistors manually)

I changed the title to a more correct issue of what I am getting :-)

Perhaps you could create a Basket in JLCPCB and it will do the same for you ?

Many Thanks.

[bitfieldlabs]

That's weird as I have used the JLC files in the gerber folder multiple times now without such issues.

[Nutty-69]

I will try it again tonight :-)

[Nutty-69]

Ok Same files different outcome !! You got to love JLCPCB sometimes.

But this was easy to sort :-)

Thanks for your help.