Flash parameters

[jorgenDK]

Can I have flash write values for "partitions.bin" ?

I need to clear the configuration and writing "firmware.factory.bin" does not reset configuration.

/Jørgen

[dkbay]

Did you figure out how to flash it? I setup wifi in the meshtastic app and can no longer reach it so want to reflash :/

[jorgenDK]

I did same mistake - activated wifi - without first activate serial.

On my Kubuntu I did flashed like this:

• Installed pip3 and venv (search google on how)

• source .venv/bin/activate

• Installed esptools.py (search google on how)

• git clone https://github.com/badgeteam/bornhack2025-flasher.git

• cd to bornhack2025-flasher

• esptool.py --chip esp32c3 --port /dev/ttyACM0 --baud 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 firmware/firmware.factory.bin

But it did now clear configuration - I'm have to figure out how to do that.

[jorgenDK]

*did not clear