Is it possible to control the alarms generated by Poolstation?

[quicoalonso]

Hi Miguel,
Yesterday I had a problem with my installation, which I could not locate with HA.
The main pump stopped and the Poolstation system indicated the Flow alarm, stopping production.
From what I have seen, it does not seem that the integration currently manages it.
Would it be possible that alarms can be managed by HA?
There are alarms, such as Flow, that can be considered very serious, since they imply a stoppage of the equipment, and require a possible blockage of valves or more emergency actions to avoid flooding or damage the equipment.

I give you the list of alarms that appear in the poolstation (with * the considered critical):

• Flow Alarm
  pH high/low
  pH tank alarm
  pH PumpStop alarm
  ORP high/low
  ORP tank alarm
  ORP PumpStop alarm
  PPM high/low
  PPM tank alarm
  Chlorine ppm PumpStop alarm
• Alarm cell
  Conductivity alarm
• Pressure alarm
  UV ballast alarm
  UV fuse alarm
  pH fuse alarm
  pH pump alarm
  ORP fuse alarm
  ORP pump alarm
  PPM fuse alarm
  PPM pump alarm
  Temperature alarm
  Jump Alarm

Can it be something?

thank you very much

[cibernox]

I don't know if this is what you are looking for, but the integratio does expose something that sounds very similar to what you are referring to. It's a binary sensor with the category of "Problem" named water_flow:

https://github.com/cibernox/homeassistant-poolstation/blob/master/custom_components/poolstation/binary_sensor.py#L37-L43

    PoolstationBinarySensorEntityDescription(
        key="water_flow",
        name="Water Flow",
        device_class=BinarySensorDeviceClass.PROBLEM,
        is_on_fn=lambda pool: pool.waterflow_problem,
        has_fn=lambda pool: pool.waterflow_problem is not None,
    ),

[straybiker]

Water flow, uv fuse and uv balast are exposed