got Chirpstack v4 running, but can't see to connect after setting up the device in Arduino IDE:
Have A Wio Terminal Tester with https://wiki.seeedstudio.com/Wio_Terminal_LoRaWan_Chassis_with_Antenna-built-in_LoRa-E5_and_GNSS_EU868_US915
Cleared the Eprom with Clear_LoRaE5_eprom.uf2
Then setup as
16:08:24.697 -> LoRaWan configuration OKZONE: US915
16:16:25.394 -> OK
16:16:25.394 -> KO
16:16:25.394 -> KO
16:17:08.925 -> DEVEUI:2CF7F1C054100641
16:17:08.925 -> OK
16:19:44.497 -> APPKEY:564xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16:19:44.497 -> OK
16:20:11.858 -> APPEUI:D2BF2FD0069ED850
16:20:11.858 -> OK
16:20:11.894 -> LoRaWan configuration OK
Default settings I got from default templates looks like:
Device config:
I also setup a sensecap T1000 and that actived, so there's something I'm missing with setup conditions.
Any help would be appreciated. The gateway shouldn't matter but its Dragino DLOS8N
got Chirpstack v4 running, but can't see to connect after setting up the device in Arduino IDE:
Have A Wio Terminal Tester with https://wiki.seeedstudio.com/Wio_Terminal_LoRaWan_Chassis_with_Antenna-built-in_LoRa-E5_and_GNSS_EU868_US915
Cleared the Eprom with Clear_LoRaE5_eprom.uf2
Then setup as
Default settings I got from default templates looks like:
Device config:
I also setup a sensecap T1000 and that actived, so there's something I'm missing with setup conditions.
Any help would be appreciated. The gateway shouldn't matter but its Dragino DLOS8N