diff --git a/CHANGELOG.md b/CHANGELOG.md
index 695283b..857b6d3 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -6,6 +6,18 @@ All notable changes to Wafersmith are recorded here. The format follows
 
 ## [Unreleased]
 
+### Added
+
+- **Your first chip** ([docs/user-guide/first-chip.md](docs/user-guide/first-chip.md)): a
+  step-by-step walk-through with screenshots, from the start page to a checked layout in about ten
+  minutes, linked from the README and the user guide.
+
+### Fixed
+
+- Health said "Add examples to finish checking" for a design with a state machine even when
+  everything was checked: the state-machine diagram and the "Find examples for everything" card
+  are information, and no longer count towards being ready.
+
 ## [0.1.0] - 2026-11-06
 
 The first release. A person who doesn't write Verilog can take a small design from a description
diff --git a/README.md b/README.md
index fe29fc7..da8bf0f 100644
--- a/README.md
+++ b/README.md
@@ -76,13 +76,14 @@ cp .env.example .env && cargo run -p wafer-api
 pnpm install && pnpm dev:web
 ```
 
-Then open http://localhost:5173.
+Then open http://localhost:5173, sign in, and follow [Your first chip](docs/user-guide/first-chip.md).
 
 ## Documentation
 
 | | |
 |---|---|
 | [Getting started](docs/getting-started.md) | Running everything locally, development accounts, tests |
+| [Your first chip](docs/user-guide/first-chip.md) | Step by step with screenshots: a design from the start page to a checked layout in ten minutes |
 | [User guide](docs/user-guide/README.md) | Design view, Blocks, examples, Health, code editing, runs, agent, IP registry |
 | [Architecture](docs/architecture.md) | Components, data flow, storage, trust boundaries, design decisions |
 | [API reference](docs/api.md) | HTTP and WebSocket endpoints, roles, errors |
diff --git a/apps/web/src/components/Design.tsx b/apps/web/src/components/Design.tsx
index 08596ed..5389f9e 100644
--- a/apps/web/src/components/Design.tsx
+++ b/apps/web/src/components/Design.tsx
@@ -1654,7 +1654,8 @@ function Health({
   const speedup = periodNs && typeof wns === "number" && wns < periodNs ? periodNs / (periodNs - wns) : null;
   const mm2 = typeof s?.die_area_um2 === "number" ? s.die_area_um2 / 1e6 : null;
 
-  type Card = { id: string; ok: boolean | null; title: string; plain: string; explain: string; expert: string; extra?: ReactNode };
+  // `info`: shows how the design works or offers a tool; it doesn't count towards being ready.
+  type Card = { id: string; ok: boolean | null; title: string; plain: string; explain: string; expert: string; extra?: ReactNode; info?: boolean };
   const cards: Card[] = [];
   // Examples on the gates: some are for other settings (e.g. N = 2) and are skipped on this build.
   const gEx = (gls?.runs ?? []).filter((r) => r.top.startsWith("tb_ex_"));
@@ -1810,6 +1811,7 @@ function Health({
     cards.push({
       id: "find-all",
       ok: null,
+      info: true,
       title: "Find examples for everything",
       plain:
         `The simulator can search for examples for ${[gapsN && `the ${gapsN} untried ${gapsN === 1 ? "case" : "cases"}`, slippedN && `the ${slippedN} slipped ${slippedN === 1 ? "mistake" : "mistakes"}`].filter(Boolean).join(" and ")} above at once, using one example for several where it can. You check each one before it is added.` +
@@ -1825,6 +1827,7 @@ function Health({
     cards.push({
       id: `machine-${i}`,
       ok: null,
+      info: true,
       title: `How it works: ${m.module} steps through ${m.states.length} states`,
       plain:
         `${m.transitions.length} ways to move between them` +
@@ -1876,7 +1879,7 @@ function Health({
               ? "Not built yet"
               : stale
                 ? "Built from an older version"
-                : cards.every((c) => c.ok === true)
+                : cards.every((c) => c.info || c.ok === true)
                   ? "Ready for expert review"
                   : cards.some((c) => c.ok === false)
                     ? "Needs work"
diff --git a/docs/user-guide/README.md b/docs/user-guide/README.md
index 8ce3486..02d69ad 100644
--- a/docs/user-guide/README.md
+++ b/docs/user-guide/README.md
@@ -10,8 +10,12 @@ Wafersmith has two ways into the same project:
 
 Both work on the same files and Git history, so experts and non-experts can work together.
 
+New here? Start with **[Your first chip, step by step](first-chip.md)**: one design from the start
+page to a checked layout in about ten minutes, with screenshots.
+
 | Page | What it covers |
 |---|---|
+| [Your first chip](first-chip.md) | A walk-through: a starter, its examples, why a value is what it is, Health, the build |
 | [Starter designs](starters.md) | Sixteen verified designs to start a project from or add as blocks |
 | [Design view](design-view.md) | Describe, Examples (and chip examples), what actually happened, Health; the spec format |
 | [Blocks](blocks.md) | Building the chip from blocks, connection checks, adapters, the assistant's review |
diff --git a/docs/user-guide/first-chip.md b/docs/user-guide/first-chip.md
new file mode 100644
index 0000000..7b83854
--- /dev/null
+++ b/docs/user-guide/first-chip.md
@@ -0,0 +1,139 @@
+# Your first chip, step by step
+
+This walk-through takes one design from the start page to a checked chip layout in about ten
+minutes. You won't write any Verilog, and nothing here uses the AI, so it costs nothing. Once you
+know the way round, the other pages of this guide explain each part in depth.
+
+You'll use the **UART receiver** starter: a small block that listens on a serial line (`rx`) and
+outputs each byte it receives (`data`), with a one-cycle `valid` pulse when a byte arrives.
+
+**Before you start:** Wafersmith must be running and you need to be signed in. On your own
+machine, follow [Getting started](../getting-started.md), open http://localhost:5173 and sign in
+with one of the development accounts listed there.
+
+## 1. Start a project
+
+On the start page, under **Start from a working design**, click **UART receiver** in the
+Communication group. Every starter is a finished design whose examples already pass.
+
+![The UART receiver starter, selected](images/first-chip-01b-starter.png)
+
+The name box fills in with the starter's name. Click into it and type your own (each of your
+projects needs a different name), leave **Private** and the licence as they are, and click
+**Create**.
+
+![Naming the new project](images/first-chip-01-new-project.png)
+
+## 2. Read what it should do
+
+The project opens on the **Design** view, step 1, **Describe**. Here is the design in plain words
+("A UART receiver… rx idles at 1… a frame is a start bit, 8 data bits and a stop bit") and its
+**connections**: the inputs and outputs, with what each one means.
+
+![The Describe step](images/first-chip-02-describe.png)
+
+The files on the left are what Wafersmith keeps for you: the design (`src/uart_rx.v`) and one
+testbench per example (`tb/examples/`). You don't need to open them; the **Code** switch at the
+top is there for people who want to.
+
+## 3. Run the examples
+
+Click step 2, **Examples**, then **Run examples**. Examples are the tests: each one sets the inputs
+over time and says what the outputs must be. The badge should read **5 of 5 passing**.
+
+![The examples, all passing](images/first-chip-03-examples.png)
+
+Click an example in the list to see it on the right:
+
+- The strip at the top shows what the example **sets** (blue, here the bits on `rx`) and what it
+  **checks** (amber, here `data` and `valid` at the end).
+- **What actually happened** is the design's behaviour, cycle by cycle, from the simulator. Green
+  "matches the example" means every check held.
+
+## 4. Ask why
+
+In **What actually happened**, click any value. Here, clicking the byte `0x3c` on `data` explains
+where it came from:
+
+![Why data is 60](images/first-chip-04-why.png)
+
+It names the line of the design that wrote the value (`data <= shreg`), why that line ran (each
+decision around it, with the values it saw), and the values it used. Each of those can be clicked
+in turn, so you can follow a value back to the example step that caused it. When an example fails,
+this is how you find out why.
+
+## 5. Check its health
+
+Click step 4, **Health**, then **Plant mistakes and check**. Wafersmith makes small mistakes in a
+copy of the design, one at a time (a number one off, a comparison turned round), and runs your
+examples against each. A mistake that no example notices is a behaviour nothing pins down.
+
+For this design, 2 of 34 slip through. Both change a counter's limit by one. Click **Find
+examples for all** in the **Find examples for everything** card: the simulator searches for inputs
+that expose them and finds one example that catches both.
+
+![Two mistakes slip through, and one example catches both](images/first-chip-05-find-examples.png)
+
+Read the example it found. It is written as a sentence ("rx takes the values 1, 0, 1, 0, …; data
+must be 170; valid must be 1"), and the checks at the end are **what the design did**, so decide
+whether that is what it *should* do. Here it is: the bits form the byte 0xAA, which is 170. If it
+weren't, you would have found a bug.
+
+Then:
+
+1. Click **Add 1 example**. It opens in Examples, unsaved.
+2. Click **Save spec** at the top. This commits the change to the project's history.
+3. Back in **Health**, click **Check again**. All 34 planted mistakes are now caught.
+
+## 6. Build the chip
+
+Still in Health, click **Build and check**. The design goes through the full chip flow (synthesis,
+placement, routing and the sign-off checks) for the IHP SG13G2 process. It takes about a minute.
+
+![Ready for expert review](images/first-chip-06-ready.png)
+
+Each card says one thing in plain words:
+
+- **It works**: the examples pass, also on the gates the chip would be made from.
+- **The examples try every case**, and **catch all planted mistakes**.
+- **Fast enough**, **Can be manufactured** (no layout rule errors, the layout matches the design),
+  **Size and power**.
+
+**What does this mean?** on any card explains it and shows the engineering numbers behind it.
+**Open the build** shows the run, and its **Layout** tab the chip itself:
+
+![The layout](images/first-chip-07-layout.jpg)
+
+"Ready for expert review" is as far as Wafersmith takes you on its own. The last card lists what
+an expert still has to check before a real chip is made (pads, manufacturing test, power-up and
+the final go/no-go). **Review report** gives them one printable page about the design.
+
+## When an example fails
+
+You'll see this as soon as you change something. A failing example turns red, and **What actually
+happened** shows where the design differs. Then:
+
+- **Why wasn't it …?** under the difference lists every line that could have given the expected
+  value, and the decision that stopped each one ("`cnt == N - 1` was false (cnt = 2)").
+- If the **example** is wrong, **The example: use what the design did** rewrites its check from
+  the simulation, after showing you the change.
+- If the **design** is wrong, **The design: try a small fix** tries the small repairs that undo the
+  most common mistakes, and offers only those after which every example passes, each as a one-line
+  change you can accept.
+- **The design: ask the AI to fix it** sends the explanation you followed along with the request
+  (this uses your AI budget). The AI agent changes a copy of the project; you review its proposal
+  and merge it.
+
+## Where to go next
+
+- **Change the design in your own words.** On Describe, edit the text and click **Update spec with
+  the assistant**: it updates the connections and examples to match. Then **Ask the AI to make them
+  pass** (in Examples), or send a request from the **Agent** panel, and the AI agent changes the
+  Verilog until every example passes, for you to review. Both need an API key and count against
+  your daily AI budget.
+- **Try it** (in Examples) turns the design into a small board you can play with, and turns what
+  you did into a new example.
+- **Blocks** builds a bigger chip from this design, other starters and imported IP.
+- The rest of this guide: [Design view](design-view.md), [Starter designs](starters.md),
+  [Blocks](blocks.md), [Code and collaboration](code-and-collaboration.md),
+  [Flow runs](flow-runs.md), [AI agent](agent.md), [IP registry](ip-registry.md).
diff --git a/docs/user-guide/images/first-chip-01-new-project.png b/docs/user-guide/images/first-chip-01-new-project.png
new file mode 100644
index 0000000..9129f75
Binary files /dev/null and b/docs/user-guide/images/first-chip-01-new-project.png differ
diff --git a/docs/user-guide/images/first-chip-01b-starter.png b/docs/user-guide/images/first-chip-01b-starter.png
new file mode 100644
index 0000000..0839b7b
Binary files /dev/null and b/docs/user-guide/images/first-chip-01b-starter.png differ
diff --git a/docs/user-guide/images/first-chip-02-describe.png b/docs/user-guide/images/first-chip-02-describe.png
new file mode 100644
index 0000000..24bcfe1
Binary files /dev/null and b/docs/user-guide/images/first-chip-02-describe.png differ
diff --git a/docs/user-guide/images/first-chip-03-examples.png b/docs/user-guide/images/first-chip-03-examples.png
new file mode 100644
index 0000000..439fada
Binary files /dev/null and b/docs/user-guide/images/first-chip-03-examples.png differ
diff --git a/docs/user-guide/images/first-chip-04-why.png b/docs/user-guide/images/first-chip-04-why.png
new file mode 100644
index 0000000..fb18d86
Binary files /dev/null and b/docs/user-guide/images/first-chip-04-why.png differ
diff --git a/docs/user-guide/images/first-chip-05-find-examples.png b/docs/user-guide/images/first-chip-05-find-examples.png
new file mode 100644
index 0000000..46b6e7f
Binary files /dev/null and b/docs/user-guide/images/first-chip-05-find-examples.png differ
diff --git a/docs/user-guide/images/first-chip-06-ready.png b/docs/user-guide/images/first-chip-06-ready.png
new file mode 100644
index 0000000..ff71848
Binary files /dev/null and b/docs/user-guide/images/first-chip-06-ready.png differ
diff --git a/docs/user-guide/images/first-chip-07-layout.jpg b/docs/user-guide/images/first-chip-07-layout.jpg
new file mode 100644
index 0000000..2793ff0
Binary files /dev/null and b/docs/user-guide/images/first-chip-07-layout.jpg differ