Charging Amps jumping from 1A - 5A - 16A (too much) - 1A

[Nuke8472]

Hi everybody,
I just get startet with your integration which seems suitable for me and I want to thank you for your effort.
Maybe you could help me to figure out why it is jumping without values in between?

As said in the titel the currents doesn't really match to the available power.
It is jumping from 5A (which is a little bit to low) directly to 16 A (which is then too much). Then it sees the lack of power and reduce it directly to 1 A (which is way to low)... back to 5 -16 and so on.

Inverter + Housebattery (Brand: Solax).
My helper is configured like:
houseload (including car-charging) - PV-excess

I am using the ESP32-BLE Bridge (Pedro KTFC) to my Tesla

Any clue whats happening?
Thanks everybody in advance.

[Nuke8472]

Sorry for the confusion, but it seems I found the solution:
flashg1/TeslaSolarCharger#18

Changing the voltage from 230V to 690V does the trick.
(I thought it would multiply by itself with 3.)
As written by the user PVi1, maybe a short explanation with 3-phases vs. 1-phase // EU vs. US/AU voltage levels will help in the future.

Now it's working like a charm.