Hello,
I installed pypapi on a cluster and I am encountering an unknown error code. I used papi low to do the reading. the events I used (including the commented ones) are available and can be read in the system. the code breaks in the initialization block, but I can't pin point the reason
Linux 5.14.0-362.24.1.el9_3.0.1.x86_64 x86_64
PAPI Version: 7.1.0.0
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 46 bits physical, 57 bits virtual
Byte Order: Little Endian
CPU(s): 96
On-line CPU(s) list: 0-95
Vendor ID: GenuineIntel
Model name: Intel(R) Xeon(R) Platinum 8468
CPU family: 6
Model: 143
Thread(s) per core: 1
Core(s) per socket: 48
Socket(s): 2
Stepping: 8
CPU max MHz: 3800.0000
CPU min MHz: 800.0000
BogoMIPS: 4200.00
import torch
import torchvision
import torch.nn as nn
import torch.nn.functional as F
import torch.optim as optim
from torch.autograd import Variable
from torch.utils.data import TensorDataset, DataLoader
#from pytorch_msssim import ssim, ms_ssim, SSIM, MS_SSIM
import intel_extension_for_pytorch as ipex
from tqdm import tqdm
import numpy as np
import argparse
import cv2
from matplotlib import pyplot as plt
import os
import sys
import Utils
from Network import *
from Utils_model import *
from gan_loss import *
from pypapi import papi_low as papi
import time
from pypapi import events
from pypapi.exceptions import PapiInvalidValueError, PapiMiscellaneousError
try:
papi.library_init()
events_set = papi.create_eventset()
event_names = [events.PAPI_BR_CN, events.PAPI_BR_INS, events.PAPI_BR_MSP, events.PAPI_BR_NTK, events.PAPI_BR_PRC,
# events.PAPI_BR_TKN, events.PAPI_BR_UCN, events.PAPI_CA_SHR, events.PAPI_DP_OPS, events.PAPI_FP_INS,
# events.PAPI_FP_OPS, events.PAPI_L1_ICM, events.PAPI_L1_TCM, events.PAPI_L2_DCA,
# events.PAPI_L2_ICA, events.PAPI_L2_ICH, events.PAPI_L2_ICM,
# events.PAPI_L2_ICR, events.PAPI_L3_ICA, events.PAPI_L3_ICR, events.PAPI_L3_LDM,
# events.PAPI_LD_INS, events.PAPI_LST_INS, events.PAPI_REF_CYC,
# events.PAPI_SP_OPS, events.PAPI_SR_INS, events.PAPI_TOT_CYC, events.PAPI_TOT_INS, events.PAPI_VEC_DP,
# events.PAPI_VEC_INS, events.PAPI_VEC_SP
]
papi.add_events(events_set, list(event_names))
except PapiInvalidValueError as e:
print("PAPI initialization error:", e)
sys.exit(1)
except PapiMiscellaneousError as e:
print("PAPI miscellaneous error during initialization:", e)
sys.exit(1)
except Exception as e:
print("Unexpected error during PAPI initialization:", e)
sys.exit(1)
# some code
try:
papi.start(events_set)
# some code
papi.stop(events_set)
print(papi.read(events_set))
except PapiInvalidValueError as e:
print("PAPI error:", e)
except PapiMiscellaneousError as e:
print("PAPI miscellaneous error:", e)
except Exception as e:
print("Unexpected error during PAPI operation:", e)
finally:
papi.remove_events(events_set)
papi.cleanup()
Hello,
I installed pypapi on a cluster and I am encountering an unknown error code. I used papi low to do the reading. the events I used (including the commented ones) are available and can be read in the system. the code breaks in the initialization block, but I can't pin point the reason