urlsnarf and other modules not installing correctly

[bibi1959]

I updated to last firmware OTA and reinstalled modules on SD a before. SD formatted from scratch
Urlsnarf (1.6) does not install dependencies (...installing... stays forever). Done a full firmware factory reset (updating with special web interface 192.168.x.x) - DWall (1.3) installation ok but doing nothing when selecting "enable". ettercap (1.6) by selecting instal dependecies just go back to "Not installed".
After trying all possible reset i am really lost.

[bibi1959]

following a comment in forum i performed a downgrade to 2.5.4 with no success - urlsnarf does not install

[nospamgithub]

If you log into the pineapple via ssh (or serial) after you've installed urlsnarf or "some" other modules such as sslsplit, you can cd to the /pineapple/modules/<module>/scripts directory. In there is a shell script named dependencies.sh that you can execute by "bash -x dependencies.sh install internal". When you do you'll find that the urlsnarf package is not available (as well as the dsniff and sslsplit) via opkg.

[bibi1959]

i tried to run it with no success actually. Does this mean there is no solution?

[nospamgithub]

I should point out that I was trying this from 2.6.1. Until the package(s) become(s) available again, you could build the package (dsniff/sslsplit/etc..) yourself. You might be able to start from
https://github.com/hak5/pineapple-packages-community/tree/master/network/dsniff or whichever.

Not sure if previous versions of pineapple have the packages available. I would assume so. But haven't tested.

[foxtrot]

URLSnarf and DNSSpoof are solved with #81

[bibi1959]

I am sorry to say i can't make it working with last firmware update - Dependencies are installed but no traffic is shown. the module is actually not working

[bibi1959]

Now can be installed and run from both Web pages and ssh command. ssh give output: root@Pineapple:~# urlsnarf -i br-lan
urlsnarf: listening on br-lan [tcp port 80 or port 8080 or port 3128]
but no matter the traffic nothing is displayed in both ssh and web interface.
trying manual install - opkg install urlsnarf - Package urlsnarf (2.4b1-2) installed in root is up to date.
Dunno what to do. It seems working but no logs
root@Pineapple:/pineapple/modules/urlsnarf/log# ls -l
-rw-r--r-- 1 111 118 24 Apr 6 2019 README.txt
-rw-r--r-- 1 root root 0 Jan 25 19:53 output_1579982008.log
-rw-r--r-- 1 root root 0 Jan 26 13:42 output_1580046154.log
-rw-r--r-- 1 root root 0 Jan 26 13:43 output_1580046211.log
-rw-r--r-- 1 root root 0 Jan 26 13:43 output_1580046236.log
Manual dependencies installation seems ok
root@Pineapple:/pineapple/modules/urlsnarf/scripts# bash -x dependencies.sh install internal

• '[[' -f /tmp/urlsnarf.progress ]]
• touch /tmp/urlsnarf.progress
• '[' install '=' install ]
• '[' internal '=' internal ]
• opkg update
  Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz
  Updated list of available packages in /var/opkg-lists/1907_pineapple
  Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz
  Updated list of available packages in /var/opkg-lists/1907_base
  Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz
  Updated list of available packages in /var/opkg-lists/1907_packages
  Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz
  Updated list of available packages in /var/opkg-lists/1907_routing
• opkg install urlsnarf
  Package urlsnarf (2.4b1-2) installed in root is up to date.
• touch /etc/config/urlsnarf
• echo 'config urlsnarf '"'"'run'"'"
• echo 'config urlsnarf '"'"'autostart'"'"
• echo 'config urlsnarf '"'"'module'"'"
• uci set 'urlsnarf.module.installed=1'
• uci commit urlsnarf.module.installed
• rm /tmp/urlsnarf.progress
  root@Pineapple:/pineapple/modules/urlsnarf/scripts#

---

Any idea? this is the best module to shop MiM on Pineapple and it was really working great before 2.6.x update