Python script not opening

[awake12]

When i double click the main.py it opens and closes.i triend opening it from the cmd with no success it gives me ;
usage: main.py [-h] -p PORT [-d DEVICE] [-i [INVERT [INVERT ...]]]
main.py: error: the following arguments are required: -p/--port

[hjstn]

You have to specify the COM port the controller is connected on.

[dekid69]

You have to specify the COM port the controller is connected on.

i have similar problem it said this
Traceback (most recent call last):
File "C:\Users\deboi\Downloads\miniDjiController-master\miniDjiController-master\main.py", line 6, in
import serial, pyvjoy, argparse
ModuleNotFoundError: No module named 'serial'

[hjstn]

You have to specify the COM port the controller is connected on.

i have similar problem it said this
Traceback (most recent call last):
File "C:\Users\deboi\Downloads\miniDjiController-master\miniDjiController-master\main.py", line 6, in
import serial, pyvjoy, argparse
ModuleNotFoundError: No module named 'serial'

Did you run pip install in the directory to install requirements?

[dekid69]

You have to specify the COM port the controller is connected on.

i have similar problem it said this
Traceback (most recent call last):
File "C:\Users\deboi\Downloads\miniDjiController-master\miniDjiController-master\main.py", line 6, in
import serial, pyvjoy, argparse
ModuleNotFoundError: No module named 'serial'

Did you run pip install in the directory to install requirements?

yes i have now it said
= RESTART: C:\Users\beanz\Downloads\miniDjiController-master\miniDjiController-master\main.py
Traceback (most recent call last):
File "C:\Users\beanz\Downloads\miniDjiController-master\miniDjiController-master\main.py", line 6, in
import serial, pyvjoy, argparse
ModuleNotFoundError: No module named 'pyvjoy'

[K177ok]

I think I got it. It was necessary to write pip install until everything that is needed is installed. But there was no information about it anywhere... I prescribed

pip install serial and other, but:

C:\Users\k177o\Desktop\DJI SIM\MiniDJIController>python main.py
Traceback (most recent call last):
File "C:\Users\k177o\Desktop\DJI SIM\MiniDJIController\main.py", line 6, in
import serial, pyvjoy, argparse
File "C:\Users\k177o\AppData\Local\Programs\Python\Python312\Lib\site-packages\serial_init_.py", line 10, in
from . import utilities, abc, model, marshal, errors, properties, meta, hooks, test, request
File "C:\Users\k177o\AppData\Local\Programs\Python\Python312\Lib\site-packages\serial\utilities_init_.py", line 5, in
compatibility.backport() # noqa
^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\k177o\AppData\Local\Programs\Python\Python312\Lib\site-packages\serial\utilities\compatibility.py", line 28, in backport
exec(BACKWARDS_COMPATIBILITY_IMPORTS, frame.f_globals, frame.f_locals)
File "", line 4, in
File "C:\Users\k177o\AppData\Local\Programs\Python\Python312\Lib\site-packages\future\standard_library_init_.py", line 65, in
import imp
ModuleNotFoundError: No module named 'imp'

C:\Users\k177o\Desktop\DJI SIM\MiniDJIController>

[K177ok]

Oh, it worked! And how could I guess that there was still a lot to install) The problem now is the following, if you run from cmd, you can specify the port, but the delay is VERY large. And if you just run the main file, then it immediately closes. Is it possible to register the port directly in the file and where?

[henrio6]

Oh, it worked! And how could I guess that there was still a lot to install) The problem now is the following, if you run from cmd, you can specify the port, but the delay is VERY large. And if you just run the main file, then it immediately closes. Is it possible to register the port directly in the file and where?

Do you mean the controller input delay? Or startup delay?