- Qt6 GUI requires Windows 8+: The default GUI build now requires Qt6, which only supports Windows 8 and later. A separate Qt5 build is available for Windows 7 compatibility (see build artifacts or docs/COMPILING.md)
- Added language selection to the video track options in the GUI, matching the existing audio/subtitle language selector
- Fixed AAC audio not being detected in MP4/MOV containers (reported as "Can't detect stream type"), caused by missing ADTS header generation when ESDS parsing did not set the AAC flag, and by channel count corruption from the AudioSpecificConfig channel configuration index
- Fixed MKV and MOV/MP4 demuxers returning absolute timecodes instead of relative delays, causing audio/video sync offsets (e.g. delay stored in differing track start times or edit lists) to be lost during remuxing
- GUI: Make meta file editable with manual override support, allowing users to manually edit the meta file directly in the GUI and apply advanced options not available through the visual interface
- GUI: Added "Reset meta to auto-generated" button to revert manual meta edits
- GUI: Support for merge-ac3-file option for TrueHD tracks, enabling TrueHD+AC-3 merge in the GUI with external .ac3 file input
- GUI: Preserve custom Blu-ray chapters when input files change
- Introduced AV1 codec support in MPEG-TS, implementing the AOM "Carriage of AV1 in MPEG-2 TS" draft specification
- AV1 muxing from MKV and MP4/MOV containers into MPEG-TS with start-code based OBU format and emulation prevention bytes
- AV1 demuxing from MPEG-TS to raw .obu elementary stream files
- AV1 Sequence Header parsing for profile, level, resolution, bit depth, color primaries, transfer characteristics, and HDR/WCG detection
- AV1 PMT descriptors: Registration descriptor (format_identifier 'AV01') and AV1 video descriptor (tag 0x80) per AOM spec
- AV1 keyframe detection for random access point signaling in MPEG-TS adaptation field
- Introduced automatic FPS detection from container metadata (MKV default_duration, MP4/MOV timescale) for codecs that lack timing info in the elementary stream (e.g. AV1)
- Fixed MP4/MOV files larger than 4GB not being read correctly due to compact atom size overflow
- Fixed AAC MPEG-2 TS descriptor (was disabled with early return; now emits proper AAC descriptor tag 0x2B)
- Fixed TrueHD/MLP TS descriptor to emit Blu-ray compliant HDMV registration descriptor in Blu-ray mode, or SMPTE-RA 'mlpa' registration descriptor otherwise
- Updated GUI to recognize AV1 codec: file dialog filters (.obu), About dialog, BD V3 auto-selection, and video track settings
- Updated all GUI About dialog translations (EN, DE, ES, FR, HE, RU, ZH) to include H.266/VVC and AV1 in supported codecs list
- Introduced Matroska (MKV/MKA) muxing support with EBML writing, cluster-based output, Cues index, and SeekHead
- Supported codecs for MKV output: H.264, HEVC, VVC, AV1, VC-1, MPEG-2 (video); AAC, AC3, E-AC3, DTS, TrueHD, LPCM, MP3 (audio); SRT, PGS (subtitles)
- Added CodecPrivate generation for H.264 (AVCDecoderConfigurationRecord), HEVC (HEVCDecoderConfigurationRecord), AV1 (AV1CodecConfigurationRecord), AAC (AudioSpecificConfig), and VVC
- Added MKV radio button to the GUI output panel with save dialog filter and auto-detection of .mkv/.mka extensions
- Updated all GUI translations (DE, ES, FR, HE, RU, ZH) with MKV muxing strings
- Added missing Matroska codec ID constants (A_DTS, A_EAC3, A_TRUEHD, A_MPEG/L3, V_MPEG2)
- Fixed aspect ratio override (
arparameter in metafile) being ignored for MPEG-2 and other video streams, so the original stream aspect ratio was always retained - Added Opus audio codec support for MPEG-TS and MKV muxing, including OpusHead codec-private handling and TS descriptor generation per RFC 7845
- Added FLAC audio codec support for MKV muxing and demux output, including STREAMINFO codec-private parsing
- Introduced a stream discovery phase that probes all tracks before muxing begins, collecting codec properties (channels, sample rate, resolution, HDR metadata, codec-private data) upfront to prevent late-initialization bugs in container headers
- Generalized early codec-private propagation from containers (MKV, MP4/MOV) to all stream readers via
applyDiscoveryData(), replacing the previous Opus-specific workaround - Added
getTrackCodecPrivate()support for MP4/MOV containers - Added FLAC and Opus codec entries to USAGE documentation
- Fixed file dialogs not appearing on macOS with Qt6 by using non-native dialogs
- Fixed browse button for output folder passing wrong parameter to file dialog
- Consolidated file type filters in add dialog to reduce dropdown size
- Added automatic copying of tsMuxeR CLI into macOS app bundle during build
- Fixed a an issue so that Dolby Vision EL stream type is now correct
- Fixed a bug with HEVC streams when an HDR10+ SEI payload is too short
- Fixed a bug where the first 2 frames of the first video track are muxed before anything else
- Introduced an improvement so Single Track Double Layer files now can properly handled
- Fixed a bug so that if no MOOF atom is met we stop atom parsing at the next MDAT atom
- Fixed an issue with HDR flags, so we only set them if an HEVC stream is detected
- Introduced correct ATSC descriptor for pure EAC3 tracks
- Introduced correct HDMV TS descriptors for MPEG-2 streams
- Fixed an issue where Blu-Ray movies will loop rather than stopping after reading
- Introduced being able to include Dolby Vision descriptors in TS or M2TS mode
- Fixed the order of streams so that video streams always come first
- Introduced a GUI option for adjusting PIP transparency
- Fixed an issue where translated strings appeared in the meta file
- Fixed a bug in the output paths of the MXE build scripts
- Ensured we keep M2TS descriptors in TS files (temporary until a long-term solution can be found)
- Fixed a bug where filenames were being truncated prematurely if there were dots in the filename
- Introduced putting overnight builds into OBS, to build for various Linux platforms
- Improved the documentation to fix a broken URL for the test files
- Introduced a simplification of the method used to play sounds in the GUI
- Fixed an issue with broken ISO labels when using non-ASCII characters
- Introduced a refactoring that moved the About page into an external HTML file for the GUI
- Introduced a code cleanup that removed all usages of std::wstring
- Fixed an issue with incorrect subtitle spacing on Windows
- Introduced support for M4V files
- Fixed issue with subtitle timestamps when joining multiple M2TS files together
- Fixed incorrect usage of POSIX APIs in Windows builds
- Fixed a bug with encoding errors when dealing with SSIF files
- Fixed a bug where we could read over the end of an MP4 file
- Introduced keeping the track order when multiple video tracks are added
- Introduced support for reading fragmented MP4 files
- Introduced support for specific AVC and HEVC descriptors in TS files
- Introduced support for Dolby Vision atoms in AVC or HEVC streams
- Introduced a changelog and improved general documentation
- Fixed an issue with garbled subtitles being displayed
- Introduced translation support, as well as a full Russian translation of the GUI
- Introduced getting the HDR10 information from the SPS VUI in HEVC
- Introduced detection of UTF8 in subtitle files
- Fixed usage of WinMain, which lead to issues with console output on Windows
- Introduced converting meta files using active code page if UTF8 fails
- Improved the documentation for building with Msys2
- Fixed bugs in the handling of non-ASCII characters in paths on Windows
- Fixed bugs in subtitles PIDs for BD V3 M2TS with HDR
- Fixed bug with the display of bitrate and channel numbers for EAC3 and AC3 tracks
- Fixed bug with GUI not correctly allowing to select DTS Express 24-bit as a secondary track
- Introduced an error message when an output file longer than 255 characters and reduced overall file length
- Fixed bug where 3D plane information was showing for 2D BD-ROMs
- Fixed a bug with uneven width between characters in subtitles on Mac and Linux
- Introduced the ability to detect audio delays in MKV files
- Fixed a bug where the 3D planes were not detected in specific cases
- Fixed a bug with alignment of the subtitle tracks and 3D planes
- Removed unnecessary floating point conversion code from the GUI source tree
- Added support for frame rates of 50, 59.94 and 60
- Fixed an issue with HDR10 HEVC streams where the maxCLL and maxFALL values were set incorrectly
- Fixed typos and improved the clarity of certain wording in the GUI
- Fixed typos and grammar issues with the readme and usage information
- Introduced the git revision to the version string in the GUI and CLI
- Introduced automatic selection of BD V3 for HEVC in GUI
- Fixed an issue with compiling on Mac
- Fixed an issue with the handling of wav64
- Introduced a workaround for QTBUG-28893
- Performed another round of GUI code cleanup
- Introduced a uniform code formatting style
- Fixed a bug with reading the FPS information from certain streams
- Fixed a typo in the GUI settings for the font family setting
- Introduced a warning when a V2 video format is used for a V3 Blu-ray
- Fixed a bug with incorrect stream ID for TS stream
- Fixed typos in the source files
- Introduced UHD Blu-ray as an option in the GUI
- Fixed a bug where invalid font files could crash tsMuxer
- Fixed an issue with HEVC stream detection in the GUI
- Introduced reading the FPS info from VPS or SPS, rather than VPS only
- Fixed a bug with the CPI table I-frame thresholds with UHD
- Introduced Dolby Vision support
- Fixed compiler warnings on return value overflows
- Fixed an issue with the stream ID being incorrectly set for BD V3
- Fixed an issue when spaces where in the path to the temporary meta file in the GUI
- Fixed an issue with buffer overflows on HEVC streams
- Fixed an issue so that TS descriptors are the same as on commercial Blu-rays
- Fixed an issue where numbers were shown instead of language codes in the GUI
- Introduced nightly builds, hosted on Bintray
- Fixed a bug where the tsMuxer executable could not be found on Windows in the GUI
- Fixed a bug where muxing a SRT results in a segfault on Linux
- Introduced support for UHD HDR10 and HDR10+
- Introduced a migration from "override" to "virtual" keywords in the code to conform better to C++14
- Introduced a migration from "QObject::connect" syntax to Qt5 equivalent in the GUI
- Fixed an issue with the min and max functions when compiling on Windows
- Fixed an issue calculating the AAC frame size
- Introduced UHD (width >= 2600) support in the MPLS and CLPI
- Introduced a clean up and reformatting of the documentation
- Introduced UHD BD V3 support
- Fixed an issue with EAC3 bitrate, sampling rate and channel information not being set correctly
- Fixed a bug with parsing of AC3
- Fixed an issue with the stream type not being set correctly for H265
- Fixed an issue when parsing MP4 AAC 5.1 where the channel output is not read correctly
- Fixed an issue with parsing the AAC frame length
- Introduced an update of the C++ standard from 11 to 14
- Introduced a cleanup of precompiled headers
- Introduced using std::thread for the TerminatableThread in libmediation
- Introduced cross-platform CMake build system
- Introduced a cleanup of libmediation that removed condvar, mutex and time from the library
- Introduced a translation of comments from Russian to English
- Introduced a migration from Qt4 to Qt5
- Fixed mkv parser a bit. I've got unparsed file example
- update SEI correction: do not correct SPS/PPS if stream contains different PPS with same pps_id
- several minor bugs fixed
- fixed saving UI settings to a registry. Also, if file tsMuxerGUI.ini found, UI will switch settings to an ini file instead of registry (you can create empty ini file at the beginning).
- UI: change control for cut start/end time
- fixed SEI processing for 'force' mode ( it doesn't work correctly for some movies)
- fixed bug in the wav demuxer (first audio frame has mixed up channels)
- fixed timings for PG streams. Timings was inaccurate for amount of several ms (for some movies only, it depended of the first PTS of the file)
- inserting SEI did not work for some H.264 stream at all
- add more correction for VUI parameters if option insert SEI is active (it helps to open some H.264 streams in the Scenarins and solve PS3 problem for some sources)
- fixed channels for 7.1 and 7.0 wav files
- fixed combined H.264 streams read from Elementary Stream
- BD Bitrate control improved a little bit
- Add secondary video support
- fixed mp4 files with MPEG-DASH
- fixed SEI again
- fixed DTS-ES recognition
- fixed font renderer (a little bit wrong text position)
- several minor improvments and bug fixes
- fixed bug with SEI messages for some movie
- fixed problem with some movies where problem occured during processing several last video frames
- several minor bug fixes
- add HEVC video codec support
- UI improvment: Save settings for General tab, Subtitles tab and last output folder
- Fixed file duration detection for ssif and some m2ts files
- Fixed bug if mux playlist and several sup files (it is a very olg bug, but it became much more often since 2.4.x)
- Several minor bug fixes
- Add secondary audio support for bluray muxing. Due to standart It is allowed only for DTS-Express and DD+ codecs.
- Filter out H.264 filler packets
- UI improvment: option for MPLS offset can be entered either as time or as 45Khz clock value
- UI improvment: UI displays opened file duration
- UI improvment: chapter list correctly updated if join several files. Also joining for MPLS is enabled.
- Add help if run tsMuxeR without parameters
- Fixed muxing for 96Khz TRUE-HD tracks
- PCM inside VOB was anonced before, but actually did not work. Fixed.
- UI fix: if open MPLS, then close, track list is not cleared. It is broken in previous build only.
- Subtitles renderer fixed (broken in previous build only after in/out effects)
- Support PG subtitles inside MKV
- Support MKV tracks with zlib compression
- Support 3D MP4 and MOV files (combined AVC+MVC stream)
- Add option 'line spacing' to subtitles renderer
- Add fade in/out effect to subtitles renderer
- Fixed ability to drag&drop files directly to tsMuxerGUI shurtcut (it worked before in version 10.6)
- Fixed splitting operation if no video track present
- bug fixed: tsMuxeR can't create output directory for UNC path (for instance \.\Volume{E5FB13D8-5096-11E3-B9C4-005056C00008}\folder1\test.ts)
- bug fixed: message "file already exist" appeared if open several files from a folder with '(' in the name
- Add support for DTS-HD elementary stream with extra DTSHD headers
- Add support for mkv with 'Header Stripping' compression
- Add 3D MKV support
- Add PCM inside MKV support
- Add PCM inside VOB support
- Fixed option 'bind to video fps' for subtitles
- Improved font renderer quality
- Fixed file splitting option (it was disabled since v.1.11.x because of was not implemented for ISO and 3D-blurays)
- Several minor bug fixes
- Fixed join files problem with True-HD track
- introduce MAC build
- Add support for combined AVC+MVC streams
- Output file size slightly reduced
- Fixed bug if mux AVC+MVC tracks to m2ts file. Some 3d m2ts movies did not play on Samsung Smart TV
- Fixed minor bug in a SSIF interleaving for some movies
- introduce Linux build
- Same problem fixed again. Sometimes tsMuxeR get access to file with wrong name during mpls processing.
- Previous version introduce a new bug. Sometime tsMuxeR showed error message "file not found". Fixed.
-
fixed bug in MVC stream recognition. MVC from Intel Media Encoder now work.
-
SSIF files is not required any more if you open 3D MPLS file
-
Add Stereo subtitles basic support. If source PG stream has stereo format, same stereo PG stream will be created in a output file
-
Add tag (or ) to srt parser. This tag force to show subtitle message. For instance:
1 00:00:10,440 --> 00:00:20,375 Senator, we're making our final approach into Coruscant.
- fixed subtitles bug: "3d-plane" option was inaccessible for many disks
improvments:
- add control for select/unselect all tracks at once bug fixes:
- extract ac3 core from e-ac3 track fixed
- fixed option --m2tsOffset (was broken in version 2.x.x)
- fixed 'bufer overflow' error message if simultaneously mux several m2ts files and one of them has PSG tracks only
- fixed problem with too long file names in demux mode for large mpls files
- bug fixed: removing overlapped frames for HD audio fixed
- add direct ISO output
- fixed H.264 stream parser. Same fix as in previous version but more careful
- fixed subtitles color selection in UI
- fixed H.264 stream parser. It cause video distortion for some movies.
- add DTS-express support. Is not fully complete yet, tsMuxeR doesn't produce subpath for secondary audio
- fixed file join for mov/mp4
- fixed bug in SEI unit processing (if enable options 'insert picture timing'). Bug may cause video distortion.
- fixed distortion for VC1 codec if join several files
- seamless audio fixed. Extra audio frame correctly removed.
- fixed 3d subtitles. Add ability to select 3D offset plane for subtitles
- add new parameter '--start-time'. This parameter define time for first video frame in output file. This parameter is filled automatically (too keep same input time) if open MPLS file.
- several more minor fixes in transport stream to improve Blu-ray compatibility
- fixed E-AC3 codec
- fixed problem with ssif muxing
- add addition check for 'insert picture timing' parameter. For MVC depended view used same value as for primary video stream
- add new parameter to GUI and tsMuxeR core: 'right-eye'. Parameter is used for 3D blurays only. If parameter is set then MPEG-4 MVC Base view video used for Right eye. This parameter filled automatically in GUI if open MPLS file.
- add 3d bluray support. Bluray muxing activated automatically if MVC substream appears in input tracks. To reduce HDD space, tsMuxeR doesn't produce ssif file, only a couple of .m2ts files. ssif files can be creted on the fly in DVD fab using "create mini iso" menu item.
- add ability to mux to ssif file directly. It is not supported in GUI, but you can provide .ssif file extension
- fixed bugs in SEI message processing and add MVC sei message support
- fixed several bugs in the Transport Stream to improve compatibility with Blu-ray standart.
- fixed bug in SSIF file demuxing. It cause a problem for subtitles tracks.
- added SSIF files support for blu-ray play lists (MPLS)
- detect language for audio/subtitle tracks fixed for SSIF files (it's work if ssif file is opened from Blu-ray disk structure)
- bug fixed in MVC parsing
- add support of SSIF files and MVC codec (3d Blu-ray compatibility)