diff --git a/custom_components/reterminal_dashboard/frontend/hardware/waveshare-esp32-c6-lcd-1.47.yaml b/custom_components/reterminal_dashboard/frontend/hardware/waveshare-esp32-c6-lcd-1.47.yaml
new file mode 100644
index 00000000..e1e84a08
--- /dev/null
+++ b/custom_components/reterminal_dashboard/frontend/hardware/waveshare-esp32-c6-lcd-1.47.yaml
@@ -0,0 +1,207 @@
+# ============================================================================
+# ESPHome YAML - Generated by ESPHome Designer
+# ============================================================================
+# TARGET DEVICE: Waveshare ESP32-C6 LCD 1.47" 172x320
+#         - Display Platform: st7789v
+#         - PSRAM: No
+#         - Touchscreen: None
+#         - Framework: ESP-IDF
+# Name: Waveshare ESP32-C6 LCD 1.47"
+# Resolution: 172x320
+# Shape: rectangle
+# Inverted: false
+# Orrientation: portrait
+# Dark Mode: disabled
+# ============================================================================
+#
+# BASED ON: https://www.waveshare.com/esp32-c6-lcd-1.47.htm
+# Hardware configuration adapted for ESPHome Designer.
+#
+# ============================================================================
+#
+# SETUP INSTRUCTIONS:
+#
+# STEP 1: Copy the Material Design Icons font file
+#         - From this repo: resources/fonts/materialdesignicons-webfont.ttf
+#         - To ESPHome: /config/esphome/fonts/materialdesignicons-webfont.ttf
+#         (Create the fonts folder if it doesn't exist)
+#
+# STEP 2: Create a new device in ESPHome
+#         - Click "New Device"
+#         - Name: your-device-name
+#         - Select: ESP32-C6
+#         - Framework: ESP-IDF (Required for this device)
+#
+# STEP 3: PASTE this snippet into your device YAML
+#         - Paste this snippet at the end of your configuration.
+#         - System sections (esphome, esp32, psram, etc.) are auto-commented
+#           to avoid conflicts with your existing setup.
+#
+# ============================================================================
+
+substitutions:
+  name: "waveshare_esp32_c6_lcd_147"
+  id: esp32_c6_lcd_147
+  friendly_name: "Waveshare ESP32-C6-LCD-1.47\""
+  device_description: "Waveshare ESP32-C6 LCD 1.47 inch"
+  project_name: "karl-petter.ESPHomeDesigner_Waveshare_LCD_1_47"
+  project_version: "1.0.0"
+  #GPIO pins for the LCD screen and SD Card
+  rstpin:  GPIO21
+  dcpin:   GPIO15
+  blpin:   GPIO22
+  clkpin:  GPIO7
+  mosipin: GPIO6
+  misopin: GPIO5
+  cspin:   GPIO14
+  # GPIO pins for i2c
+  sdapin:  GPIO1
+  sclpin:  GPIO2
+  # SD Card
+  sd_cs_pin: GPIO4
+  # LED
+  rgb_led: GPIO8
+    # One Wire
+  one_wire: GPIO10
+  logger: "DEBUG"
+
+esp32:
+  board: esp32-c6-devkitc-1
+  variant: esp32c6
+  flash_size: 4MB
+  framework:
+    type: esp-idf
+    sdkconfig_options:
+      CONFIG_ESPTOOLPY_FLASHSIZE_DETECT: y
+      CONFIG_ESPTOOLPY_FLASHSIZE_4MB: y
+      CONFIG_OPENTHREAD_ENABLED: n
+      CONFIG_USE_MINIMAL_MDNS: y
+      # Memory optimization
+      COMPILER_OPTIMIZATION_SIZE: y
+      COMPILER_OPTIMIZATION_LEVEL_RELEASE: y
+      CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE: y
+      CONFIG_HEAP_POISONING_DISABLED: y
+
+esphome:
+  friendly_name: $friendly_name
+  name: $name
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+  platformio_options:
+    board_build.flash_mode: dio
+    build_flags:
+      - "-DI2C_NUM_1=I2C_NUM_0"
+      - "-DBOARD_HAS_PSRAM"
+      - "-Wl,-Map,output.map"
+    board_build.arduino.memory_type: qio_opi
+
+spi:
+  mosi_pin: $mosipin
+  miso_pin: $misopin
+  clk_pin: $clkpin
+
+i2c:
+  sda: $sdapin
+  scl: $sclpin
+
+one_wire:
+  - pin: $one_wire
+    platform: gpio
+
+text_sensor:
+  # ESPHome Version
+  - platform: version
+    name: "ESPHome Version"
+    id: "${id}_esphome_version"
+    icon: si:esphomes
+    hide_timestamp: 'true'
+    entity_category: diagnostic
+  # WiFi Info: IP, MAC, SSID, BSSID, Scan
+  - platform: wifi_info
+    ip_address:
+      name: "IP Address"
+      icon: mdi:ip
+      entity_category: diagnostic
+      disabled_by_default: True
+    mac_address:
+      name: "WiFi MAC Address"
+      icon: mdi:fingerprint
+      entity_category: diagnostic
+      disabled_by_default: True
+    ssid:
+      name: "Connected SSID"
+      icon: mdi:wifi-settings
+      entity_category: diagnostic
+      disabled_by_default: True
+    bssid:
+      name: "Connected BSSID"
+      icon: mdi:wifi
+      entity_category: diagnostic
+      disabled_by_default: True
+    scan_results:
+      name: "Latest Scan Results"
+      icon: mdi:wifi-sync
+      entity_category: diagnostic
+      disabled_by_default: True
+
+binary_sensor:
+  # https://esphome.io/components/binary_sensor/status.html
+  # Reports if this device is Connected or not
+  - platform: status
+    name: "Status"
+    id: "${id}_status"
+    icon: mdi:check-network
+    entity_category: diagnostic
+
+light:
+  # RGB LED
+  - platform: esp32_rmt_led_strip
+    pin:
+      number: $rgb_led
+      ignore_strapping_warning: true
+    name: "RGB LED"
+    id: rgb_led
+    chipset: ws2812
+    num_leds: 1
+    rgb_order: RGB
+    # gamma_correct: 2.8
+    default_transition_length: 2s
+    restore_mode: RESTORE_DEFAULT_OFF
+
+output:
+  - platform: ledc
+    pin: $blpin
+    id: lcd_backlight
+    frequency: 1000 Hz
+
+number:
+  - platform: template
+    name: "Display Brightness"
+    id: display_brightness
+    optimistic: true
+    min_value: 0
+    max_value: 100
+    step: 1
+    initial_value: 100
+    restore_value: true
+    mode: slider
+    on_value:
+      then:
+        - output.set_level:
+            id: lcd_backlight
+            level: !lambda "return x / 100.0;"
+
+# https://esphome.io/components/display/
+# TFT Display (ST7789)
+display:
+  - platform: st7789v
+    cs_pin: $cspin
+    dc_pin:
+      number: $dcpin
+      ignore_strapping_warning: true
+    reset_pin: $rstpin
+    model: Waveshare 1.47in 172X320
+    id: my_display
+    rotation: 0
+    # __LAMBDA_PLACEHOLDER__