Merge pull request #28 from loopandlearn/cleanup/remove-nightscout-remote-docs

Remove Nightscout remote command documentation

Author: marionbarker

docs/remote/img/lf-nightscout.png

@@ -27,9 +27,10 @@ For a full summary of version requirements and feature history, see [Version Com
 The graphic below shows the Remote Settings screen for *LoopFollow*. You must first enter a *Nightscout* URL before any remote options are offered and then only the option suitable for that *Nightscout* site can be selected.
 
 * When following someone running Loop, the options are None or [Loop Remote Control](remote-control-loop.md){: target="_blank" }
-* When following someone running Trio, the options are None or:
-    * Trio 0.5.x and newer: [Trio Remote Control](remote-control-trio.md){: target="_blank" }
-    * Trio 0.2.x: [Nightscout Remote Control](remote-control-nightscout.md#loopfollow-careportal-with-the-trio-app){: target="_blank" }
+* When following someone running Trio 0.5.x or newer, the options are None or [Trio Remote Control](remote-control-trio.md){: target="_blank" }
+
+!!! note "*Nightscout* Careportal Remote Commands Removed"
+    As of *LoopFollow* 6.x, *Nightscout* remote commands are no longer supported in *LoopFollow*. Remote control is now exclusively via direct APNS to the *Loop* or *Trio* app.
 
 ![LoopFollow remote options - all types](img/lf-remote-options_3.2.svg){width="600"}
 {align="center"}
@@ -38,10 +39,6 @@ The graphic below shows the Remote Settings screen for *LoopFollow*. You must fi
 
 If you plan to use *LoopFollow* Remote Control with a looper using the *Loop* app version 3.x or the *Trio* app version 0.5 or newer, and you don't have your APNS key information recorded or configured, see the instructions in [*Apple* Push Notifications System (APNS)](#apple-push-notifications-system-apns).
 
-If your looper is using *Trio* 0.2.x, use this link for configuration:
-
-* [*Nightscout* Remote Control](remote-control-nightscout.md){: target="_blank" }
-
 - - -
 
 ## Loop Follow Remote Control Configuration
@@ -189,6 +186,5 @@ The other remote credential are entered as described in the appropriate link.
 
 * [*Loop* Remote Control](remote-control-loop.md)
 * [*Trio* Remote Control](remote-control-trio.md)
-* [*Nightscout* Remote Control](remote-control-nightscout.md) (`Trio 0.2.x only`)
 
 

docs/remote/img/lf-ns-remote-loop-details.png

@@ -1,6 +1,9 @@
 ## Remote Control Overview
 
-Trio can accept remote commands from *Nightscout* or from *LoopFollow*. There are a variety of options, but the final control of whether remote commands will be enacted rests with the *Trio* user. They can enable or disable remote control.
+*Trio* accepts remote commands from *LoopFollow* via direct APNS. The final control of whether remote commands will be enacted rests with the *Trio* user — they can enable or disable remote control.
+
+!!! note "*Nightscout* Careportal Remote Commands Removed"
+    As of *LoopFollow* 6.x, *Nightscout* remote commands are no longer supported in *LoopFollow*. Use *Trio* Remote Control (TRC) below, which requires *Trio* 0.5.x or newer.
 
 !!! warning "*Nightscout* version must be 15.0.2 or newer"
     To properly display the OpenAPS pill with *Trio* 0.5.x (or newer), your *Nightscout* version must be 15.0.2 (or newer). If you do not see the expected treatments or pills in the *Nightscout* dashboard, follow the steps to [Configure Nightscout for Trio (OpenAPS)](#configure-nightscout-for-trio-openaps).
@@ -25,17 +28,6 @@ Starting with *LoopFollow* v4.0 and *Trio* v0.6, users of remote control are pro
     **Question: If I was using Trio / LoopFollow remote control do I need to change my configuration parameters?**: No, the parameters you already set up continue to work. **BUT** you need to update the *LoopFollow* Identifiers if you use Browser Build.
 
 
-??? question "How does this differ from *Trio* 0.2.x? (Click to Open/Close)"
-    *Trio* can use *Nightscout* Careportal to enter `Carb Correction`, and start and cancel `Temporary Target`.
-    
-    * This was available in *Trio* 0.2.x and continues to be available in *Trio* 0.5.x (or newer).
-    * See [*Nightscout* Remote Control](remote-control-nightscout.md#loopfollow-careportal-with-the-trio-app){: target="_blank" }
-
-    *Trio* 0.2.x supported other remote options (using announcements via Careportal). 
-    
-    * Those options were replaced by the more secure *Trio* Remote Control for *Trio* 0.5.x (or newer)
-    * **Using announcements to provide remote control of the *Trio* phone is no longer supported**
-
 ### Quick Access
 
 The bullets below take you to the indicated topics. The configuration steps are listed first but only need to be done once:
@@ -208,9 +200,6 @@ The Remote Settings row in the *LoopFollow* Settings screen is used to select th
 !!! question "The *Trio* Remote Control option is not available"
     The `Trio Remote Control` option is only available in *LoopFollow* if you have already entered a [*Nightscout* Site](../setup/lf-setup.md#setup-nightscout){: target="_blank" } with a default profile recognized as a *Trio* profile. Review [Troubleshooting](#troubleshooting) for possible reasons for not seeing the option.
 
-* *Nightscout* option
-    * Remote control with *LoopFollow* is limited to starting and canceling Temp Targets
-    * Available with *Trio* 0.2.x and newer
 * *Trio* Remote Control option
     * Remote control with *LoopFollow* includes adding remote carbs, enacting remote bolus, and starting and canceling Temp Targets and Overrides
     * Requires *Trio* 0.5.x (or newer) and *LoopFollow* 2.4.x (or newer)
@@ -345,7 +334,7 @@ In addition to this step, you may need to force the profile (from Trio) to uploa
 ### Update Profile
 
 !!! warning "Must on *Trio* 0.5.x (or newer)"
-    If you are on *Trio* 0.2.x, you might see the option for *Trio* Remote Control in *LoopFollow* Remote Settings, but you can't use it. See [Use *LoopFollow* *Nightscout* Remote Control](remote-control-nightscout.md#loopfollow-careportal-with-the-trio-app).
+    If you are on *Trio* 0.2.x, *LoopFollow* 6.x can no longer remotely control *Trio* — upgrade *Trio* to 0.5.x or newer to use *Trio* Remote Control.
 
 If you were previously running the *Loop* app or the *iAPS* app, [Stop *Nightscout* upload](#stop-nightscout-uploads-from-other-apps) from those apps and then force the profile to update.
 

docs/remote/img/lf-ns-remote-loop.png

@@ -38,14 +38,15 @@ Do not skip the overview page if you have not yet configured *LoopFollow* for Re
 
 * [Remote Control Overview](../remote/remote-control-overview.md)
 
-There are separate pages for the 3 different remote control options. (No page is provided if `None` is selected).
+There are separate pages for the different remote control options. (No page is provided if `None` is selected).
 Quick access is provided using these links once you have configured *LoopFollow* for Remote Control:
 
 * None
-* [*Nightscout*](../remote/remote-control-nightscout.md){: target="_blank" } (*LoopFollow* offers actions that can be done from a *Nightscout* Careportal)
-* [*Loop* Remote Control](../remote/remote-control-loop.md){: target="_blank" } 
+* [*Loop* Remote Control](../remote/remote-control-loop.md){: target="_blank" }
 * [*Trio* Remote Control](../remote/remote-control-trio.md){: target="_blank" }: requires Trio 0.5.x or newer
 
+> As of *LoopFollow* 6.x, *Nightscout* remote commands are no longer supported in *LoopFollow*.
+
 
 - - -
 

docs/remote/remote-control-nightscout.md

@@ -121,7 +121,6 @@ For a full summary of version requirements for *Loop* and *Trio* remote control,
 | **None** | Read | OK (Read) |
 | ***Loop* Remote Control**| Read | OK (Read) |
 | ***Trio* Remote Control**| Read | OK (Read) |
-| ***Nightscout***<br>Trio 0.2 or older | Read & Careportal | OK (Read & Write) |
 
 ##### WebSocket
 

docs/remote/remote-control-overview.md

@@ -192,7 +192,6 @@ nav:
   - 'Remote Control Overview': 'remote/remote-control-overview.md'
   - 'Loop Remote Control': 'remote/remote-control-loop.md'
   - 'Trio Remote Control': 'remote/remote-control-trio.md'
-  - 'Nightscout Remote Control': 'remote/remote-control-nightscout.md'
 - Build:
   - 'LoopFollow Build': 'build/build-options.md'
   - 'LoopFollow Browser Build': 'build/lf-browser-build.md'