The CZ-TAW1 module was connected to the Aquarea Smart Cloud and stopped working sometime in the fall/winter. The "Status" indicator started flashing red. After rebooting the module it works for a while and then breaks again.
I decided to try sending the heat pump data to the Mqtt server.
I performed a firmware rewrite using the following link:
https://www.mediafire.com/file/c2ac2ls56fhzxbz/GoHeishaMon1.1.191z166.zip/file
Everything started working and I was already happy, but only half an hour. And then the data to mqtt stopped going. After rebooting the module, it's the same again - it works for a while and then stops again. The situation is the same as with the original firmware.
Do you have any ideas on how to solve this problem?
The CZ-TAW1 module was connected to the Aquarea Smart Cloud and stopped working sometime in the fall/winter. The "Status" indicator started flashing red. After rebooting the module it works for a while and then breaks again.
I decided to try sending the heat pump data to the Mqtt server.
I performed a firmware rewrite using the following link:
https://www.mediafire.com/file/c2ac2ls56fhzxbz/GoHeishaMon1.1.191z166.zip/file
Everything started working and I was already happy, but only half an hour. And then the data to mqtt stopped going. After rebooting the module, it's the same again - it works for a while and then stops again. The situation is the same as with the original firmware.
Do you have any ideas on how to solve this problem?