Y ends have oversize holes for 10mm rods

[hasbridge]

During assembly, I noticed that my 10mm rods are loose in the Y end pieces. I imported both STL files into sketchup, and each hole is oversized. On the y-motor stl, they appear to be 10.5mm, and on the y-idler piece, they appear to be 10.8.

[thatch]

They are indeed oversized on the one I printed as well. I'm switching to a more Taz-style Y end, as this piece is the toughest to print.

[mjrice]

The idler end holes are indeed a little over sized, and I'll fix that tonight and push an update. The .5mm on the motor end holes was intentional - with a 0.5mm nozzle, interior holes tend to be undersized by the diameter of the nozzle. Maybe I should generate a couple different variations for smaller nozzles.

[hasbridge]

I would actually prefer undersized by a tiny bit, because I could ream them with a 10mm drill bit to get a perfect 10mm hole afterwards. In the mean time, I wound up wrapping my rod ends with aluminum tape for a snug fit.