error when Reading settings XML file...

[Occulter-HR]

Hi，
I use pip3 install parametric-plasma-source. When I used build_and_run_model.py in the examples with jupyter notebook, the following error occurred.
My input python file is consistent with build_and_run_model.py, as shown in the following code.

Is there a way to slove?
Thank you!

[makeclean]

Could you attach the settings.xml file here too?

[Occulter-HR]

I’m sorry I can’t upload in .xml format, so I compressed it into .zip format to upload.
settings.zip

[makeclean]

By the looks of that settings.xml file you are missing a whole slew of other things to do with an OpenMC run, so I would suggest if failed since you dont have any run settings, number of histories and so on. I.e. you need the rest of your OpenMC problem. Have you got a complete OpenMC geometry that you're trying to run against?

[Occulter-HR]

https://github.com/open-radiation-sources/parametric-plasma-source/blob/main/examples/openmc_model/build_and_run_model.py
I am running this example.

[Occulter-HR]

I repeated this example again, still this error and the content of settings.xml is the same.
When I do not use parametric-plasma-source, but use point source or ring source, openmc can run normally

[DanShort12]

Hi @Occulter-HR - can you try instead to install with:

pip install git+https://github.com/open-radiation-sources/parametric-plasma-source.git

as @shimwell mentions on #23? That could help to determine what might be going wrong here.