AUBESS PM plug: `TS011F` `_TZ3000_gvn91tmx`

[slcn-dxd]

I successfully flashed a Tuya TSF011 variant (Aubess branded, manufacturer _TZ3000_gvn91tmx) using the following device_db.yaml entry:

OUTLET_AUBESS_PM_TS011F:
  human_name: AUBESS PM outlet
  category: outlet
  power: mains
  neutral: required
  device_type: router
  stock_model_name: TS011F
  stock_manufacturer_name: _TZ3000_gvn91tmx
  stock_converter_manufacturer: Tuya
  stock_converter_model: TS011F_plug_1
  override_z2m_device: TS011F_plug_1_2
  tuya_module: ZTU
  mcu_family: Telink
  mcu: TLSR8258
  config_str: b28wrpvx;TS011F-BS-PM;SB5u;RD2;IC4;M;
  stock_manufacturer_id: 4417
  stock_image_type: 54179
  firmware_image_type: 43556
  build: yes
  status: in_progress

After the initial flash completed successfully via Z2M OTA, the device no longer appears in the Z2M OTA section. I need to update the config_str and flash new firmware, but cannot access OTA updates.

Current state of the device in Z2M:

How can I flash firmware updates to this device now that it's no longer listed in the OTA section?

[Brudrmusslos]

On the right side of your state picture is a purple symbol. Have you tried setting the custom index there?

[andrei-lazarov]

Hi! You are missing the custom converters. Missed a step in updating.
See bottom of the page:

1. download the converters
2. restart Z2M
3. interview device
4. reconfigure device

Then the status should change to Supported: External and you should see a lot of options in Exposes.
You can change the config string without flashing again.

[slcn-dxd]

On the right side of your state picture is a purple symbol. Have you tried setting the custom index there?

Thanks, this does not seem to work. I only get an error when entering the path to my index_router.json ("No image currently available").

Hi! You are missing the custom converters. Missed a step in updating. See bottom of the page:

1. download the converters
2. restart Z2M
3. interview device
4. reconfigure device

Then the status should change to Supported: External and you should see a lot of options in Exposes. You can change the config string without flashing again.

I did copy the custom converters from my fork after running the github action with the new configuration string. Restarted Z2M, interviewed and reconfigured the device. But still, the status of the devices stays at "Not supported".

EDIT: Nevermind, the external converters were never loaded into z2m due to permission problems. After fixing this, the conversion worked flawlessly and I am now able to change the config string. Thanks for the quick support!

[andrei-lazarov]

Great, can I add the device to the database? Or you need more testing?

[slcn-dxd]

You can add it to the database, here is my current working entry for device_db.yaml:

MODULE_AUBESS_PM_TS011F:
  human_name: Tuya AUBESS 1-gang
  category: module
  power: mains
  neutral: required
  device_type: router
  stock_model_name: TS011F
  stock_manufacturer_name: _TZ3000_gvn91tmx
  stock_converter_manufacturer: Tuya
  stock_converter_model: TS011F_plug_1
  override_z2m_device: TS011F_plug_1_2
  tuya_module: ZTU
  mcu_family: Telink
  mcu: TLSR8258
  config_str: b28wrpvx;TS011F-BS-PM;SC4u;ID2i;RB5;M;
  stock_manufacturer_id: 4417
  stock_image_type: 54179
  firmware_image_type: 43556
  build: yes
  status: in_progress
  info: PM not implemented
  threads: https://github.com/romasku/tuya-zigbee-switch/issues/334
  store: https://de.aliexpress.com/item/1005005958920309.html

[usv]

После обновления на вашу прошивку пропали сенсоры
Напряжение sensor.rozetka_voltage
Ток sensor.rozetka_current
Мощность sensor.rozetka_power