(Silabs) TS0042/TS0043 2-gang/3-gang switch (MOE)

[wintersommer]

Module: ZS3L: https://developer.tuya.com/en/docs/iot/zs3l?id=K97r37j19f496
MCU: EFR32MG21A020F768IM32

! Info: There is also TS0041/TS0042/TS0043 1-gang/2-gang/3-gang switch
#293 Thread , which are TELink ZT3L devices. This one is for ZS3L TS0042/TS0043 2-gang/3-gang battery powered devices (MOE's)

The Pinout ### will follow...

• TS0042 (_TZ3000_5e235jpa) - IEEE: 0xb0c7defffe5e962b
• TS0043 (_TZ3000_gbm10jnj) - IEEE: 0x94b216fffeab8b74

Photos:

WIP:

• 🎉 battery optimizations #342
• Add docs on how to Flash SiLabs using Raspberry Pi #358

[andrei-lazarov]

The Silabs PCB looks very similar to the Telink PCB.
If the Telink pinout is: buttons D2 C2 C3, leds D4 C0 D7
I would guess the Silabs pinout is: buttons A0 A4 A3, leds D0 D1 C0

[andrei-lazarov]

Added! Same firmware / pinout as

• Add Moes 3/4 gang scene switches (Silabs) #382