_TZ3000_qa8s8vca TS130F LoraTap SC400

[dberrocal-git]

White-label: LoraTap SC400 – Cover TS130F
The seller calls it the first generation, and it doesn't have percentage-based controls in the original firmware
https://www.zigbee2mqtt.io/devices/TS130F.html

Device flashed with GIRIER_TS130F_1GANG from: #408, working fine 👍

Unfortunately, I don't have the programmer to dump the original firmware yet, but as soon as it arrives, I'll be able to dump it, since I have four more.

Pinout:

• C0: open relay
• C2: close relay
• A0: network LED
• B5: open button
• C3: close button
• D2: stop button

Since the firmware only supports two actions (open/close), the BD2u part can be ignored:

BD2u;LA0;XB5C3f;CC0C2;

With the GIRIER_TS130F_1GANG Definition:
dwytrmda;TS130F-GIR;BD2u;LA0;XB5C3f;CC0C2;

[andrei-lazarov]

Thanks for sharing, I'll add it to main! cc @LorandBiro

it doesn't have percentage-based controls in the original firmware

I believe they are exposed in Z2M. What happens when you try to set a percentage?

BD2u;LA0;XB5C3f;CC0C2;

I think it also needs M; at the end, so it defaults to "momentary switch" (for the touch buttons)? I forgot how it works for covers

[dberrocal-git]

I believe they are exposed in Z2M. What happens when you try to set a percentage?

Yest they are exposed, but when you select a percentage in this generation, it opens or closes completely.

I think it also needs M; at the end, so it defaults to "momentary switch" (for the touch buttons)? I forgot how it works for covers

That's right! Otherwise, it only moves up/down if you hold down the button hehe