testing

Author: gigapod

docs/introduction.md

@@ -15,12 +15,12 @@ This guide covers the use of the following SparkFun DataLogger Products:
 
 To follow along with this tutorial, you will need the following materials - all available at <a href="https://www.sparkfun.com" target="_blank" rel="noopener noreferrer">sparkfun.com :octicons-link-external-24: </a>.
 
-* A supported [SparkFun DataLogger IoT](https://www.sparkfun.com/products/22462) board|
-* [microSD card formatted with FAT32 [COM-15107]](https://www.sparkfun.com/products/15107)|
-* [USB C Cable](https://www.sparkfun.com/usb-c-to-usb-c-cable-1-meter-flexible-silicone.html) for communication and power|
-* A [qwiic Cable](https://www.sparkfun.com/products/14426)|
-* At least one [Qwiic enabled devices that is compatible](../supported_devices)|
-* For battery powered operation, a [Lithium Ion Battery](https://www.sparkfun.com/products/18286)|
+* A supported [SparkFun DataLogger IoT](https://www.sparkfun.com/products/22462) board
+* [microSD card formatted with FAT32 [COM-15107]](https://www.sparkfun.com/products/15107)
+* [USB C Cable](https://www.sparkfun.com/usb-c-to-usb-c-cable-1-meter-flexible-silicone.html) for communication and power
+* A [qwiic Cable](https://www.sparkfun.com/products/14426)
+* At least one [Qwiic enabled devices that is compatible](../supported_devices)
+* For battery powered operation, a [Lithium Ion Battery](https://www.sparkfun.com/products/18286) - note, battery polarity should match the DataLogger expectations
 
 ### The Sensors
 

mkdocs.yml

@@ -257,6 +257,7 @@ nav:
       - Configuration: configuration.md
       - Supported Qwiic Devices: supported_devices.md
       - Suggested Reading: suggested_reading.md
+      - Supported Qwiic Devices2: supported_devices.md
   - Examples:
       - Connecting to a WiFi Network: wifi_network.md
       - Adding a Timestamp to Data: example_timestamp.md