Support STM32

[vovagorodok]

#29

[vovagorodok]

Error:

Compiling .pio/build/nucleo_wb55rg_p/lib9d5/ArduinoOTA/utility/stm32_flash_boot.c.o
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c: In function 'copy_flash_pages':
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:53:10: error: 'FLASH' undeclared (first use in this function)
   53 |   while (FLASH->SR & FLASH_SR_BSY);
      |          ^~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:53:10: note: each undeclared identifier is reported only once for each function it appears in
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:53:22: error: 'FLASH_SR_BSY' undeclared (first use in this function)
   53 |   while (FLASH->SR & FLASH_SR_BSY);
      |                      ^~~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:70:40: error: 'FLASH_BASE' undeclared (first use in this function)
   70 |   uint8_t startSector = (flash_offs == FLASH_BASE) ? 0 : 1; // 1 if bootloader is in sector 0
      |                                        ^~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:71:56: error: 'SMALL_SECTOR_SIZE' undeclared (first use in this function)
   71 |   uint8_t endSector = 1 + startSector + ((count - 1) / SMALL_SECTOR_SIZE); // size of the first 4 sectors is 0x4000 kB
      |                                                        ^~~~~~~~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:76:76: error: 'LARGE_SECTOR_SIZE' undeclared (first use in this function)
   76 |       endSector = 5 + (((count - 1) + (startSector * SMALL_SECTOR_SIZE)) / LARGE_SECTOR_SIZE);
      |                                                                            ^~~~~~~~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:80:5: warning: implicit declaration of function 'CLEAR_BIT' [-Wimplicit-function-declaration]
   80 |     CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
      |     ^~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:80:26: error: 'FLASH_CR_SNB' undeclared (first use in this function)
   80 |     CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
      |                          ^~~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:81:18: error: 'FLASH_CR_SER' undeclared (first use in this function)
   81 |     FLASH->CR |= FLASH_CR_SER | (sector << FLASH_CR_SNB_Pos);
      |                  ^~~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:81:44: error: 'FLASH_CR_SNB_Pos' undeclared (first use in this function)
   81 |     FLASH->CR |= FLASH_CR_SER | (sector << FLASH_CR_SNB_Pos);
      |                                            ^~~~~~~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:82:18: error: 'FLASH_CR_STRT' undeclared (first use in this function)
   82 |     FLASH->CR |= FLASH_CR_STRT;
      |                  ^~~~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:96:3: warning: implicit declaration of function 'SET_BIT' [-Wimplicit-function-declaration]
   96 |   SET_BIT(FLASH->CR, FLASH_CR_PG);
      |   ^~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:96:22: error: 'FLASH_CR_PG' undeclared (first use in this function)
   96 |   SET_BIT(FLASH->CR, FLASH_CR_PG);
      |                      ^~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/utility/stm32_flash_boot.c:108:5: warning: implicit declaration of function 'NVIC_SystemReset' [-Wimplicit-function-declaration]
  108 |     NVIC_SystemReset();
      |     ^~~~~~~~~~~~~~~~
Compiling .pio/build/nucleo_wb55rg_p/libfca/CRC/CrcFastReverse.cpp.o
Compiling .pio/build/nucleo_wb55rg_p/libfca/CRC/FastCRC32.cpp.o
Compiling .pio/build/nucleo_wb55rg_p/lib5b2/SPI/SPI.cpp.o
Compiling .pio/build/nucleo_wb55rg_p/lib5b2/SPI/utility/spi_com.c.o
*** [.pio/build/nucleo_wb55rg_p/lib9d5/ArduinoOTA/utility/stm32_flash_boot.c.o] Error 1
Compiling .pio/build/nucleo_wb55rg_p/lib7a8/STM32duinoBLE/BLEAdvertisingData.cpp.o
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/InternalStorageSTM32.cpp: In member function 'virtual int InternalStorageSTM32Class::open(int)':
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/InternalStorageSTM32.cpp:73:19: error: 'struct FLASH_EraseInitTypeDef' has no member named 'PageAddress'
   73 |   EraseInitStruct.PageAddress = flashWriteAddress;
      |                   ^~~~~~~~~~~
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/InternalStorageSTM32.cpp: In member function 'virtual size_t InternalStorageSTM32Class::write(uint8_t)':
.pio/libdeps/nucleo_wb55rg_p/ArduinoOTA/src/InternalStorageSTM32.cpp:93:27: error: 'FLASH_TYPEPROGRAM_WORD' was not declared in this scope; did you mean 'FLASH_TYPEPROGRAM_FAST'?
   93 |     if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, flashWriteAddress, addressData.u32) != HAL_OK)
      |                           ^~~~~~~~~~~~~~~~~~~~~~
      |                           FLASH_TYPEPROGRAM_FAST
*** [.pio/build/nucleo_wb55rg_p/lib9d5/ArduinoOTA/InternalStorageSTM32.cpp.o] Error 1

[vovagorodok]

Working target

[env:nucleo_f401re_stm32duino_ble]
platform = ststm32
board = nucleo_f401re
lib_deps =
	stm32duino/STM32duinoBLE@^1.4.0
	jandrassy/ArduinoOTA@^1.1.0
	RobTillaart/CRC@^1.0.3
build_flags =
	${env.lib_deps}
	-D CUSTOM_BLE_SPI
	-D BLE_SPI_MISO=D12
	-D BLE_SPI_MOSI=D11
	-D BLE_SPI_CLK=D3
	-D BLE_SPI_CS=A1
	-D BLE_SPI_IRQ=A0
	-D BLE_SPI_FREQ=8000000
	-D BLE_SPI_MODE=SPI_MODE0
	-D BLE_CHIP_TYPE=BLUENRG_M0
	-D BLE_RESET=D7

Maybe combine:

• 511-NUCLEO-F401RE https://eu.mouser.com/ProductDetail/STMicroelectronics/NUCLEO-F401RE?qs=fK8dlpkaUMvGeToFJ6rzdA%3D%3D
• X-NUCLEO-IDB05A2 https://eu.mouser.com/ProductDetail/STMicroelectronics/X-NUCLEO-IDB05A2?qs=vmHwEFxEFR8AXWC%2Fg7u8Sw%3D%3D

And use with IDB05A2_SPI_CLOCK_D3 as in example https://github.com/stm32duino/STM32duinoBLE?tab=readme-ov-file#examples-1