From ac33dbf632d3d48235fccc2368f37e841bab41c3 Mon Sep 17 00:00:00 2001
From: webbrain-one <295484252+webbrain-one@users.noreply.github.com>
Date: Mon, 10 Aug 2026 09:33:10 +0300
Subject: [PATCH] docs: improve README

Generated by qwen3.6-35b-a3b via local API.
---
 README.md | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/README.md b/README.md
index f076db9..07876d0 100644
--- a/README.md
+++ b/README.md
@@ -1,3 +1,5 @@
+
+
 <div align="center">
 
 # ⚡ JamFlipper
@@ -155,8 +157,8 @@ arduino-cli core update-index \
 arduino-cli core install esp32:esp32
 
 # Compile & upload (replace port)
-arduino-cli compile --fqbn esp32:esp32:esp32s2 jam_flipper_esp32/
-arduino-cli upload  --fqbn esp32:esp32:esp32s2 -p /dev/ttyUSB0 jam_flipper_esp32/
+arduino-cli compile --fqbn esp32:esp32s2 jam_flipper_esp32/
+arduino-cli upload  --fqbn esp32:esp32s2 -p /dev/ttyUSB0 jam_flipper_esp32/
 ```
 
 > **Port:** Linux `/dev/ttyUSB0` · macOS `/dev/cu.usbmodem*` · Windows `COM3`
@@ -203,7 +205,7 @@ ufbt launch
 1. On Flipper Zero: `Apps → GPIO → JamFlipper`
 2. Select a mode from the main menu
 3. For targeted modes: scan APs → select target → (optionally) select client
-4. Press **OK** to start · **BACK** to stop
+4. Press **OK** to start · Press **BACK** to stop, then **BACK** again to exit
 5. Live output shown on the console screen; credentials auto-saved to SD card
 
 ---
@@ -342,8 +344,8 @@ Tüm bilgiler SD karta `/apps_data/jam_flipper/` klasörüne kaydedilir:
 **arduino-cli ile:**
 ```bash
 arduino-cli core install esp32:esp32
-arduino-cli compile --fqbn esp32:esp32:esp32s2 jam_flipper_esp32/
-arduino-cli upload  --fqbn esp32:esp32:esp32s2 -p /dev/ttyUSB0 jam_flipper_esp32/
+arduino-cli compile --fqbn esp32:esp32s2 jam_flipper_esp32/
+arduino-cli upload  --fqbn esp32:esp32s2 -p /dev/ttyUSB0 jam_flipper_esp32/
 ```
 
 Flash tamamlandıktan sonra ESP32 Dev Board'u Flipper Zero'nun üst GPIO konektörüne tak.
@@ -378,7 +380,7 @@ Veya `flipper_app/dist/jam_flipper.fap` dosyasını qFlipper ile `SD Card → ap
 1. Flipper Zero'da `Apps → GPIO → JamFlipper`
 2. Ana menüden mod seç
 3. Hedefli modlarda: AP tara → hedef AP seç → (isteğe bağlı) istemci seç
-4. **OK** ile başlat · **BACK** ile durdur
+4. **OK** ile başlat · **BACK** ile durdur, çıkış için tekrar **BACK**
 5. Canlı çıktı konsol ekranında görünür, bilgiler otomatik SD karta kaydedilir
 
 ---