I and my DAD made a growing collection of custom KiCad symbols and footprints for components not available in the official libraries or finding them are so hard
This library was created from measurements of the physical module and verified for use in PCB designs. It is intended for projects using common 433 MHz ASK/OOK wireless remote control systems. (I actually send this Footprint and Symbol for my Harvard CS50X final project and they accepted and this link is certificate for that project)
- ✅ Custom schematic symbol
- ✅ Custom PCB footprint
- ✅ Through-hole package
- ✅ 11-pin layout
- ✅ Ready for KiCad 8/9/10
- ✅ Suitable for DIY and commercial PCB projects
| Pin | Name | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | VDD | Power Supply |
| 3 | D3 | Data Output 3 |
| 4 | D2 | Data Output 2 |
| 5 | D1 | Data Output 1 |
| 6 | D0 | Data Output 0 |
| 7 | PIN7 | Unknown / Reserved |
| 8 | PIN8 | Unknown / Reserved |
| 9 | LED | LED Output |
| 10 | GND | Ground |
| 11 | ANT | Antenna |
- The pin names were taken from the original module.
- The footprint dimensions were created from the physical module and tested in KiCad.
- ✉️ Borna Etminan (owner) Email: borna.etminan34@gmail.com
- ✉️ Nader Etminan Email: fartoos.co@gmail.com
- 🧧 Borna Etminan (owner) Github: Borna-Etminan
- 🧧 Nader Etminan Github: Nader-Etminan