By default, stock Android treats your audio hardware very conservatively. To prevent cheap built-in speakers from rattling, Android heavily compresses audio dynamics, cuts deep sub-bass frequencies, enforces coarse 15-step volume sliders, and limits Bluetooth bitrate.
NLSound is an all-in-one system audio module for rooted Android devices. It safely removes software limiters, tunes low-level hardware registers, and unlocks the true capabilities of your phone's DAC, speaker amplifiers, and microphones.
Note
No background apps or battery drain: NLSound modifies system configurations and driver registers directly. Once installed, it works completely in the background without needing companion apps or persistent background services.
| Feature | Stock Android 📱 | With NLSound 🎵 |
|---|---|---|
| Volume Slider | Coarse 15 steps (abrupt jumps) | 30, 50, or 100 smooth steps |
| Sub-Bass Extension | Cut off below 25–40 Hz | Full extension down to 4 Hz |
| Audio Dynamics (DRC) | Compressed & volume ducking | Uncompressed, punchy dynamics |
| Low Battery Audio | Throttled volume below 20% | Zero throttling or degradation |
| Bluetooth SBC | Limited to standard bitrate | SBC HD Dual Channel unlocked |
| Bluetooth Volume | Buggy / quiet on some buds | Absolute Volume disabled (Full gain) |
| Direct Playback | Forced AudioFlinger mix | Bit-perfect Direct PCM mode |
| Dolby Atmos | Volume pumping & hollow sound | Clean, linear acoustic profile |
[ Audio Players (Poweramp / UAPP / Apple Music / Spotify) ]
│
▼
┌───────────────────────────┐
│ Android AudioFlinger │ ──► [BYPASSED via DIRECT_PCM]
│ (Forced Resampling/Mix) │
└───────────────────────────┘
│
▼
┌───────────────────────────┐
│ DSP & Sound Limiters │ ──► [DRC / HPF 25Hz Limiters REMOVED]
└───────────────────────────┘
│
▼
┌───────────────────────────┐
│ Hardware DAC & SmartPA │ ──► [4Hz Sub-bass & Hi-Fi Power Mode]
└───────────────────────────┘
│
▼
🎧 Wired / 🔊 Speakers / 📶 BT HD
- More Volume Steps: Increases the media volume slider from the stock 15 steps to 30, 50, or 100 steps for precise, smooth control.
- Independent Preamp Boost: Fine-tune the hardware digital output level for speakers and wired headphones without affecting Bluetooth audio.
- Microphone Sensitivity: Adjust digital recording gain (DEC) to boost quiet voices or prevent clipping in noisy environments.
- Sub-bass Unlocked (4 Hz): Lowers the built-in headphone High-Pass Filter (HPF) cutoff from ~25 Hz down to 4 Hz, restoring deep, physical sub-bass in wired headphones.
- Direct PCM Routing: Unlocks
DIRECT_PCMflags, allowing supported players (Poweramp, UAPP, Neutron) to send untouched audio straight to the DAC, bypassing the Android OS mixer. - Custom Bit Depth & Sample Rate: Configure system-wide PCM targets (up to 24/32-bit and 96/192/384 kHz) without forced downsampling.
- Disable Audio Throttling: Removes Dynamic Range Compression (DRC) and artificial low-battery volume throttling.
- Softclip & Compander Off: Disables aggressive volume compression that flattens dynamic range during intense music passages.
- SBC HD Dual Channel: Unlocks high-bitrate playback for the universal SBC codec.
- aptX Adaptive Enhancements: Enables advanced aptX Adaptive 2.1/2.2 and Lossless LE profiles.
- Fix Quiet Headphones: Disables Android's buggy Absolute Volume feature, fixing low-volume issues on wireless headphones.
- Effects Cleanup: Disables fake spatializers, phase delays, and synthetic reverbs while preserving your favorite graphic equalizers and call audio clarity.
- Dolby Atmos DAX Tuning: Removes the hollow "audio in a bucket" effect, turns off annoying volume pumping, and flattens dialogue compression.
- Automatically identifies onboard hardware (Cirrus Logic, Texas Instruments TAS, NXP TFA, Awinic, Qualcomm WSA/WCD).
- Pre-configured, device-tailored ALSA mixer parameters (
tinymix) for popular Xiaomi, OnePlus, Realme, Samsung, Sony, and Google Pixel smartphones.
Click to view supported devices with dedicated hardware presets
- Xiaomi / POCO / Redmi:
- Xiaomi 14 Ultra (
aurora), Xiaomi 13 Ultra (ishtar), Xiaomi 11 Ultra (star), Xiaomi 10 Pro (cmi), Mi 10 (umi); - POCO F5 / Redmi Note 12 Turbo (
marble), POCO F3 / Redmi K40 (alioth), POCO X3 Pro (vayu), POCO X3 NFC (surya), POCO M3 / Redmi 9T (citrus,juice,chime,lime); - Redmi Note 10 Pro (
sweet,mojito), Redmi Note 9 Pro (joyeuse,curtana,gram,excalibur).
- Xiaomi 14 Ultra (
- OnePlus:
- OnePlus 13 (
OP5D55L1), OnePlus 12 (OP595DL1), OnePlus 12R / Ace 2 Pro (OP5D3BL1,OP5D2BL1), OnePlus Ace 3 (OP5929L1); - OnePlus 9R, OnePlus 9 Pro (
ingres), OnePlus 7 / 7T / 7 Pro series (guacamole,hotdog).
- OnePlus 13 (
- Realme:
- Realme 12 Pro+ (
RE5C82L1,RE5C3B), Realme GT Neo 5 (RE5C4FL1), Realme GT Neo / GT 2 (RE5473,RE879AL1,kona).
- Realme 12 Pro+ (
- Google Pixel:
- Pixel 8 and Pixel 8 Pro (
shiba,husky); - Pixel 7 Pro with hardware DSP bypass (
cheetah); - Pixel 6, Pixel 6 Pro, Pixel 6a, Pixel 7 (
bluejay,oriole,raven,panther).
- Pixel 8 and Pixel 8 Pro (
- Samsung & Sony:
- Samsung Galaxy S22 Ultra (
b0q); - Sony Xperia 1 II (
XQ-AT52), Sony Xperia 5 IV (XQ-CQ62).
- Samsung Galaxy S22 Ultra (
- Devices not listed receive universal adaptive tuning based on detected audio amplifier chips.
Detected Audio Amplifiers & DAC Hardware
NLSound scans hardware bus interfaces (I2C, SoundWire, Slimbus, Platform) to automatically tune:
- Speaker Amplifiers: Cirrus Logic (CS35L41), Texas Instruments (TAS25xx), NXP / Goodix (TFA98xx), Awinic (AW88xx), Maxim Integrated (MAX98373), Qualcomm WSA (WSA88xx).
- Primary Audio Codecs / DACs: Qualcomm WCD (Aqstic / Bolero Hi-Fi), ESS Sabre, Asahi Kasei (AKM).
When flashing NLSound in your root manager, an interactive terminal menu lets you choose exactly what you want using your Volume Buttons:
🔴 🟡 🟢 terminal — nlsound-installer
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ [01/15] VOLUME CONTROL STEPS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Changes the number of steps on the media volume slider (stock Android has only 15). |
- [VOL+] — Move down the list / Confirm installation.
- [VOL-] — Select highlighted option / Skip step.
Tip
1-Click Profile Restore: When updating the module, press [VOL+] at the first prompt to automatically restore your previous configuration in seconds!
Important
Root access (via Magisk v24+, KernelSU, or APatch) is strictly required to modify low-level audio HAL policies and driver registers.
- Root Solution: Magisk (v24+), KernelSU, or APatch.
- Overlay Architecture: Fully compatible with Magic Mount, KernelSU OverlayFS, and Mountify.
- Audio Mods: 100% compatible with Audio Modification Library (AML), ViPER4Android, and JamesDSP.
- Processors:
- Qualcomm Snapdragon: Comprehensive support (Snapdragon 625 up to 8 Elite).
- MediaTek: Preliminary support for Dimensity and Helio platforms.
- Android Versions: Android 9.0 up to Android 15+.
- Download the latest release
.zipfrom Releases or our Telegram Channel. - Open Magisk, KernelSU, or APatch app.
- Go to the Modules section and select Install from storage.
- Select the downloaded
.zipfile. - Follow the on-screen prompts using your Volume Keys.
- Reboot your device after the installation finishes.
Have questions, suggestions, or want to report a bug?
- 📢 Announcements & Updates: @nlsound_updates
- 💬 Community Support Chat: @nlsound_support
Made with ❤️ by the NLSound Team
Non-commercial, open-source project. No ads, no tracking, no paid paywalls.