Search results

Add pre-transformer gain stage (transformer saturation too subtle, per CTX comparison)

Status: Open.

#8 In DIYSynthMNL/Eurorack-Multi-Saturation-Module;

· NeoRecasata opened on May 14, 2026

Finalize Rev 0.2 (drop Prototype label, separate boards, fab gerbers)

Status: Open.

#7 In DIYSynthMNL/Eurorack-Multi-Saturation-Module;

· NeoRecasata opened on May 14, 2026

Add named test points for power, key signal nodes, and vactrol drive currents

Status: Open.

#6 In DIYSynthMNL/Eurorack-Multi-Saturation-Module;

· NeoRecasata opened on May 14, 2026

Tune indicator LED brightness (your rev 0.1 note: LEDs not bright enough)

Status: Open.

#5 In DIYSynthMNL/Eurorack-Multi-Saturation-Module;

· NeoRecasata opened on May 14, 2026

Replace silicon reverse-protection diodes (D7/D8) with Schottky

Status: Open.

#4 In DIYSynthMNL/Eurorack-Multi-Saturation-Module;

· NeoRecasata opened on May 14, 2026

Document vactrol-type guidance for opto-sat R10 (matches existing R18 note)

Status: Open.

#3 In DIYSynthMNL/Eurorack-Multi-Saturation-Module;

· NeoRecasata opened on May 14, 2026

Fix opto-sat amplitude attenuation: R10 too low + U2B gain too high

Status: Open.

#2 In DIYSynthMNL/Eurorack-Multi-Saturation-Module;

· NeoRecasata opened on May 14, 2026