Repository navigation
Release 1.1.0: printer profiles - #11
Merged
Merged
Conversation
A fixed G1 E30 F200 is ~8 mm3/s. A 0.2 mm nozzle PLA profile allows 2 mm3/s, so the extruder skipped or ground during the resume purge. Derive the feed from the active filament's filament_max_volumetric_speed (80 %), capped at the old F200.
…hers The resume preamble always used P1S coordinates and commands. On an H2C the purge station (Y265) is on the bed, the tool is selected without its hotend, temperatures have no extruder index and X homing differs. - printers.py: P1 (P1S/P1P/X1*) and H2 (H2D/H2S/H2C) profiles; anything else is refused. The P1 output is unchanged. - H2: G150.3/G150.2/G150.1 purge and wipe, M620 S<n>A H<h> / T<n> H<h> with the job's M620.10/M620.11 settings, M104/M109 ... T<e>, G28 X T300. Marked experimental, needs --allow-untested, no manual Z mode. - Machine state scan: hotend, extruder index and toolchange setup. - Output validation: temperature must be reasserted after the last tool selection (T1000 on P1, T<n> H<h> on H2). - Insert mode park position from the bed and extruder areas.
This change stops refusing A1/A1 mini and other non-Bambu models outright. They now fall back to the P1/X1 resume sequence and require the existing untested-setup confirmation instead. The H2 profile logic was also tightened: the cut sequence is gated inside M628/M629, tool/hotend selection follows the stock H2 structure, and the docs/tests were updated to match.
5 tasks done
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Release 1.1.0.
See CHANGELOG.md for the full list.