fix(skills): stop workflows from adopting a project that never ran init

.changeset/guard-uninitialized-projects.md

@@ -0,0 +1,7 @@
+---
+"@fission-ai/openspec": patch
+---
+
+### Bug Fixes
+
+- Generated skills and commands no longer adopt a project that never ran `openspec init`. Every workflow now checks `root` from `openspec list --json` before its first write, and `"root": null` means the project is not set up. What happens next depends on how the workflow was reached. A skill the agent picked on its own drops OpenSpec and answers the request normally, without asking about setup. A workflow the user asked for by name, or ran as a slash command, stops and asks whether to initialize the project, target a store, or handle the request without OpenSpec. A project whose `openspec/config.yaml` names a store this machine cannot resolve (not registered, or a malformed `store:` line) is not mistaken for an uninitialized one: the workflow stops and shows the store error. Neither path lets `openspec new change` create `openspec/` in the current directory as a side effect. Skill descriptions now name OpenSpec so hosts stop offering these workflows in unrelated repositories. `openspec new change` also says when it had to create the root itself, so a directory that was never set up no longer picks up an `openspec/` directory in silence (human output only; `--json` is unchanged).

docs-lab/reference/cli.md

@@ -1031,7 +1031,20 @@ Schema: spec-driven
 Next: openspec status --change add-caching
 ```
 
-With `--json`:
+When no `openspec/` directory was found, `new change` creates one where you are and says so:
+
+```
+Created change 'add-caching' at openspec/changes/add-caching/
+Schema: spec-driven
+Next: openspec status --change add-caching
+
+Note: no OpenSpec root was found here, so one was created at openspec/.
+Run `openspec init` to finish setting this project up, or delete that directory if you meant a different project.
+```
+
+The notice goes to stdout with the rest of the human output, and never appears with `--json`.
+
+With `--json`, in a project that already has `openspec/`:
 
 ```json
 {
@@ -1048,6 +1061,15 @@ With `--json`:
 }
 ```
 
+When no `openspec/` directory was found and `new change` created one, the JSON has the same shape. `root.path` is the directory you ran it from, and `root.source` reads `implicit`:
+
+```json
+"root": {
+  "path": "/Users/you/projects/my-app",
+  "source": "implicit"
+}
+```
+
 **Exit codes**
 
 - `0`: change created.

docs-lab/reference/skills.md

@@ -39,6 +39,13 @@ The skills come in two sets:
 - **Core**: installed by default, the main planning loop.
 - **Optional**: installed only when you add them, via [Profiles](../customize/profiles.md).
 
+Every skill expects a project that already uses OpenSpec. Before its first step that writes anything, a skill checks for a resolved root. What happens when there is none depends on how the skill was reached:
+
+- **Auto-selected**: your agent picked the skill on its own, without you naming OpenSpec. It drops OpenSpec and answers your request normally, the way it would with OpenSpec not installed.
+- **Explicit OpenSpec request**: you named OpenSpec, named the skill, or ran its command. It stops before writing and asks how to proceed: run `openspec init` here, target a store with `--store <id>`, or continue without OpenSpec. It waits for your answer.
+
+Commands are always the second case. A project whose `openspec/config.yaml` names a store this machine cannot resolve (not registered, or a malformed `store:` line) is not treated as uninitialized: the skill stops and shows the store error with its fix. No skill creates an `openspec/` directory on its own in either case. The entries below describe what each skill does once a root is in place.
+
 | Skill | Job | Type |
 |---|---|---|
 | [openspec-explore](#openspec-explore) | Think through an idea before it becomes a change proposal | Core |

skills/openspec-apply-change/SKILL.md

@@ -13,6 +13,17 @@ Implement tasks from an OpenSpec change.
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 **Input**: Optionally specify a change name (e.g., `/openspec-apply-change add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
 
 **Steps**

skills/openspec-archive-change/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-archive-change
-description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+description: Archive a completed OpenSpec change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -13,6 +13,17 @@ Archive a completed change in the experimental workflow.
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
 
 **Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.

skills/openspec-bulk-archive-change/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-bulk-archive-change
-description: Archive multiple completed changes at once. Use when archiving several parallel changes.
+description: Archive multiple completed OpenSpec changes at once. Use when archiving several parallel changes.
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -15,6 +15,17 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
 
 **Input**: None required (prompts for selection)

skills/openspec-continue-change/SKILL.md

@@ -13,6 +13,17 @@ Continue working on a change by creating the next artifact.
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 **Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
 
 **Steps**