APM32F0xx Option Bytes 配置示例 / APM32F0xx Option Bytes Configuration Example

中文 | English

中文说明

演示通过 FMC 读取和修改用户 Option Bytes，包括独立看门狗硬件模式配置，并通过 USART2 输出状态。目标工程支持 MDK/IAR。Option Bytes 修改可能触发系统复位；错误配置读保护、看门狗或启动选项可能导致调试受限，操作前请备份并确认器件手册。

使用建议

1. 检查目标 MCU、开发板、SDK 和工具链版本。
2. 阅读工程配置及源码中的引脚、时钟和外设参数。
3. 编译下载前备份现有固件，并在受控硬件上验证。
4. 更多资料请访问 www.geehy.com。

---

English

Demonstrates reading and programming user option bytes through the FMC, including hardware independent-watchdog configuration, with status output on USART2. MDK and IAR projects are included. Option-byte changes may reset the system; incorrect protection, watchdog, or boot settings can restrict debugging. Review the device manual before use.

Recommended workflow

1. Verify the target MCU, board, SDK, and toolchain versions.
2. Review pin, clock, and peripheral settings in the project and source code.
3. Back up existing firmware and validate on controlled hardware before deployment.
4. For more resources, visit www.geehy.com.