Skip to content

FIX: Update initial offset address to 0x0 in final esptool command #32

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
conana wants to merge 1 commit into
base: master
Choose a base branch
from
Open

FIX: Update initial offset address to 0x0 in final esptool command #32

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion Bin/readme.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -57,5 +57,5 @@ To use OTA Bin files above:
6. Follow the instructions to use the esptool as in the previous above section at #4 to #9.
7. Instead of the #10 command, use #9 below. There are 4 files that require the path to be added if you're not at that location.
8. Change \(path to file\) to the path and include the separator (\\ or \/) after the path for your OS.
9. esptool\[.py\] --chip esp32\[s3\] --p \(PORT\) --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_size detect --flash_freq 80m 0x1000 \(path to file\)GSR.ino.bootloader.bin 0x8000 \(path to file\)GSR.ino.partitions.bin 0xe000 \(path to file\)boot_app0.bin 0x10000 \(path to file\)GSR.ino.esp32\[s3\].bin
9. esptool\[.py\] --chip esp32\[s3\] --p \(PORT\) --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_size detect --flash_freq 80m 0x0 \(path to file\)GSR.ino.bootloader.bin 0x8000 \(path to file\)GSR.ino.partitions.bin 0xe000 \(path to file\)boot_app0.bin 0x10000 \(path to file\)GSR.ino.esp32\[s3\].bin
10. Once it flashes fully, follow #11 above to when it should finish! Remember, future bin files (OTA) can be uploaded directly to the Watchy via OTA Website.