Your pet's dinner shouldn't need the internet. Wellfed is open firmware for the PETLIBRO Granary PLAF103 pet feeder. It runs the feeder on your own Wi-Fi, with no vendor cloud and no account. The Wellfed app and Home Assistant talk to it directly. The app runs on Android phones and on macOS, Linux and Windows computers.
Note
Wellfed is in heavy development and isn't ready to look after a real pet yet. It feeds reliably on our test feeder, but it hasn't finished its long unattended run, and there's no release to install yet. We're an independent project, not affiliated with PETLIBRO.
- Feeding. Each feed stops on time, and a power cut never makes it feed twice. The feed button and the app both work.
- Schedules. Up to ten meal plans run on the feeder itself, with no phone or computer on.
- Staying local. The feeder joins your Wi-Fi, pairs over Bluetooth and only talks to the devices you pair with it.
- Installing. Wellfed installs over the air from the stock firmware. No screwdriver or soldering, and you can go back to stock the same way.
- Updating. If a new version fails to start, the feeder goes back to the one that worked.
The app and the Home Assistant integration are still in progress. The roadmap shows where each piece stands.
It's a good fit if you own a PLAF103, you're comfortable setting up a device on your home network, and you'd like to try a feeder that works without the cloud.
Wait a little longer if:
- a pet depends on the feeder for its meals;
- you want a finished phone app, or a release you can just install;
- you have a different feeder. Only the PLAF103 is supported for now;
- you can't risk the feeder. If an install goes badly wrong, getting it back means opening it up and wiring to its board.
| You want to… | Read |
|---|---|
| See what works and what's next | Roadmap |
| Learn how installing works | Installation |
| Understand how it fits together | How Wellfed works |
| Find your way around every page | Documentation index |
| Report a bug or a hardware finding | Contributing (we aren't taking pull requests yet) |
You don't need a feeder to build and test Wellfed, and the checks never touch one. Install Rust through rustup, plus Make, CMake and a C compiler, then run:
cargo install cargo-nextest cargo-deny
cargo build --locked
make checkThe developer guide covers the rest: what each folder holds, which tool does what, and how to build a full firmware image.
Wellfed is MIT licensed. The test bench board in src/hardware/bench/ is CERN-OHL-P, and dependencies keep their own licenses (third-party provenance). The repository contains no vendor firmware or device backups.
PETLIBRO and Granary are PETLIBRO's names, used here only to say which feeder Wellfed runs on.
