Extract m_eos and add a single EOS family registry

cmake/ParamsCodegen.cmake

@@ -9,28 +9,31 @@ file(GLOB_RECURSE _mfc_gen_inputs
     "${CMAKE_CURRENT_SOURCE_DIR}/toolchain/mfc/params/*.py"
 )
 
-# Enumerate the 15 generated .fpp files explicitly so ninja can track them as
+# Enumerate the 18 generated .fpp files explicitly so ninja can track them as
 # build-time outputs and so HANDLE_SOURCES does not need a configure-time GLOB
 # of ${CMAKE_BINARY_DIR}/include/<target>/ (which fails when the dir is empty).
 set(_mfc_gen_inc "${CMAKE_BINARY_DIR}/include")
 set(_mfc_gen_files_pre_process
     "${_mfc_gen_inc}/pre_process/generated_namelist.fpp"
     "${_mfc_gen_inc}/pre_process/generated_decls.fpp"
     "${_mfc_gen_inc}/pre_process/generated_constants.fpp"
+    "${_mfc_gen_inc}/pre_process/generated_eos.fpp"
     "${_mfc_gen_inc}/pre_process/generated_bcast.fpp"
     "${_mfc_gen_inc}/pre_process/generated_case_opt_decls.fpp"
 )
 set(_mfc_gen_files_simulation
     "${_mfc_gen_inc}/simulation/generated_namelist.fpp"
     "${_mfc_gen_inc}/simulation/generated_decls.fpp"
     "${_mfc_gen_inc}/simulation/generated_constants.fpp"
+    "${_mfc_gen_inc}/simulation/generated_eos.fpp"
     "${_mfc_gen_inc}/simulation/generated_bcast.fpp"
     "${_mfc_gen_inc}/simulation/generated_case_opt_decls.fpp"
 )
 set(_mfc_gen_files_post_process
     "${_mfc_gen_inc}/post_process/generated_namelist.fpp"
     "${_mfc_gen_inc}/post_process/generated_decls.fpp"
     "${_mfc_gen_inc}/post_process/generated_constants.fpp"
+    "${_mfc_gen_inc}/post_process/generated_eos.fpp"
     "${_mfc_gen_inc}/post_process/generated_bcast.fpp"
     "${_mfc_gen_inc}/post_process/generated_case_opt_decls.fpp"
 )

docs/documentation/contributing.md

@@ -87,7 +87,7 @@ between them is narrow.
 mfc.sh (env bootstrap, venv, module loading, lock)
   └─ toolchain/mfc/build.py (config slugs, cmake invocation)
        └─ CMakeLists.txt + cmake/{GPU,Fypp,ParamsCodegen,MFCTargets}.cmake
-            └─ toolchain/mfc/params/generators/cmake_gen.py (writes 15 generated .fpp includes)
+            └─ toolchain/mfc/params/generators/cmake_gen.py (writes 18 generated .fpp includes)
 ```
 
 **`mfc.sh` → `build.py`.**  `mfc.sh` is a thin shell wrapper that activates the Python
@@ -100,8 +100,8 @@ mode, debug, chemistry, MPI.  Staging and install trees are namespaced by slug u
 **CMake layer.**  `cmake/Fypp.cmake` defines `HANDLE_SOURCES`, which sets up one
 `add_custom_command` per `.fpp` file to run Fypp at build time.  `cmake/ParamsCodegen.cmake`
 registers a single ninja-tracked `add_custom_command` (DEPENDS all `params/*.py`) that
-invokes `cmake_gen.py` and writes the 15 generated includes under
-`build/include/<target>/`.  There is no configure-time generation: all 15 files are build
+invokes `cmake_gen.py` and writes the 18 generated includes under
+`build/include/<target>/`.  There is no configure-time generation: all 18 files are build
 outputs, so changing any `params/*.py` triggers only a targeted rebuild, not a full
 reconfigure.
 
@@ -466,11 +466,14 @@ If an array is allocated inside an `if` block, its deallocation must follow the
 
 ### How to Add an Equation of State
 
-Every stiffened-gas expression lives in `src/common/m_variables_conversion.fpp`. Adding a second EOS
-means supplying these, not grepping for `gammas`:
+The equation-of-state operators live in `src/common/m_eos.fpp`; the mixture closure rules that
+combine them (`s_compute_mixture_coefficients`, `s_compute_speed_of_sound` and their variants)
+stay in `src/common/m_variables_conversion.fpp`. Adding a second EOS means supplying these, not
+grepping for `gammas`:
 
 | Operator | Gives |
 |---|---|
+| `s_reference_curve` | the reference curve \f$p_{ref}, e_{ref}\f$ and \f$\Gamma_G\f$ of a state-dependent family - one `case` per family, and nothing else |
 | `s_compute_mixture_coefficients` / `_dt` | mixture \f$\Gamma, \Pi_\infty, q_v\f$ from the phase fractions, and their time derivative |
 | `f_pressure` / `s_compute_energy` | \f$p(e)\f$ and \f$E(p)\f$ |
 | `f_bulk_modulus` | \f$K(p)\f$ - every sound speed in MFC is \f$K/\rho\f$, differing only in how phases are mixed |
@@ -489,6 +492,35 @@ forms the user supplies (see @ref sec-stored-forms), and `isentrope_n`/`isentrop
 as \f$p + B = \textrm{const}\,\rho^n\f$, derived once at start-up. Convert with the `f_isentrope_*`
 operators rather than open-coding either relation.
 
+Both are resolved once in `s_initialize_eos_module`. A state-dependent family skips this and computes
+its coefficients per cell from `s_reference_curve` instead.
+
+**Adding a family** - a new state-dependent parameter set alongside Mie-Gruneisen, JWL and Vinet -
+starts at `toolchain/mfc/params/eos_families.py`: one `EosFamily` entry.
+
+From that entry, these are generated and need no hand edit: the Fortran `eos_*` constants, the
+`physical_parameters` parameter registration in `definitions.py`, the validator's per-family
+required/optional parameter sets and its initial-state coefficient call, both the
+`f_is_state_dependent` and `f_has_isentropic_reference` family tests, both layers of
+`s_initialize_eos_module`, and the `any_state_dependent_eos` case-optimization flag.
+
+Three things stay hand-written alongside the entry, each checked against the registry by a test
+that fails on disagreement: the `case` body in `s_reference_curve` (the per-family mathematics),
+the mirror function in `toolchain/mfc/eos.py`, and the family's fields on `physical_parameters` in
+`src/common/m_derived_types.fpp`. Those four edits are the whole job in the normal case.
+
+Two further edits are possible and are guarded by the compiler rather than by a test - they fail
+loudly at build with a clear error, not silently at runtime:
+
+- `m_eos.fpp`'s `use m_constants, only: ...` list must name the new `eos_<suffix>` constant. The
+  generated family predicates reference it, so omitting it fails to compile.
+- the `eos_coefficients` type in `src/common/m_derived_types.fpp` needs a new field only if the
+  family stores a coefficient the existing ones do not provide. The generated assignment in
+  `s_initialize_eos_module` fails to compile if the field is missing.
+
+One caveat: `f_has_isentropic_reference`'s `gruneisen_a == 0._wp` conjunct is a runtime test, not a
+family property, and stays hand-written in `m_eos.fpp`.
+
 ### How to Add a Test Case
 
 **Step 1: Create a case file**

docs/documentation/equations.md

@@ -25,7 +25,7 @@ where:
 
 The parameter `model_eqns` (1, 2, or 3) selects the governing equation set.
 
-**Key source files:** `src/simulation/m_rhs.fpp` (RHS evaluation), `src/common/m_variables_conversion.fpp` (EOS and variable conversion).
+**Key source files:** `src/simulation/m_rhs.fpp` (RHS evaluation), `src/common/m_eos.fpp` (equations of state), `src/common/m_variables_conversion.fpp` (variable conversion and mixture rules).
 
 ---
 

docs/module_categories.json

@@ -20,6 +20,7 @@
     {
         "category": "Physics Models",
         "modules": [
+            "m_eos",
             "m_viscous",
             "m_hb_function",
             "m_surface_tension",

src/common/m_constants.fpp

@@ -113,16 +113,12 @@ module m_constants
     integer, parameter :: BC_NO_SLIP_WALL = -16
     integer, parameter :: BC_DIRICHLET = -17
 
-    ! Synthetic turbulence array size limits
-    !> Equation of state per fluid. Values must match _EOS_NAMES in toolchain/mfc/params/definitions.py; compound registry keys
-    !! cannot be auto-generated, so these are hand-written.
-    integer, parameter :: eos_stiffened_gas = 1
-    integer, parameter :: eos_ideal_gas = 2
-    integer, parameter :: eos_mie_gruneisen = 3
-    integer, parameter :: eos_jwl = 4
-    integer, parameter :: eos_vinet = 5
+    !> Equation of state per fluid (eos_stiffened_gas, eos_ideal_gas, eos_mie_gruneisen, eos_jwl, eos_vinet) is generated from
+    !! EOS_FAMILIES in toolchain/mfc/params/eos_families.py; see generated_constants.fpp below.
     integer, parameter :: eos_rk4_steps = 8  !< fixed-step RK4 along a phasic isentrope or a reference temperature
     integer, parameter :: ode_isentrope = 1, ode_reference_temperature = 2  !< the two ODEs s_rk4 integrates
+
+    ! Synthetic turbulence array size limits
     integer, parameter :: num_synth_shells_max = 50  !< Max energy shells for synthetic turbulence
     integer, parameter :: num_turb_sources_max = 10  !< Max Gaussian forcing zones for synthetic turbulence