2026.4.1

• Changed log-messages. Most messages except errors and warnings are changed to debug messages to only be seen when debug is activated.
• Improved handling of failed discovery. Faster move to backup cloud, better handling of retries and error logs.
• Improved handling of failed messages between stove and integration.
• Fixed const import in sensor.py

Does this integration make your life easier? Please consider a donation.

2026.3.2-beta

• Fixed const import in sensor.py

2026.3.1-beta

• Reduced number of retries when stove is not discovered during startup.

2026.2.8-beta

• Changed LOGGER-messages

• Changed failed discovery handling

Does this integration make your life easier? Please consider a donation.

2026.2.7

• Added forced fan switch - forces the fan for a configurable set of time. Auto-stop when smoke temp is 320 degrees.
• Added alert reset button - Self explanatory
• Moved numbers/switches/buttons within integration for easier overview.
• Changed logic for depletion sensor:

1. Calculations now only uses set delta values instead of learned values when moving between heatlevels/waiting.
2. If the simulation ends where the room temperature is above target temperature, the simulation calculates a cooling period for the room temperature to cool down to the target temperature. This is to avoid big jumps in depletion times, where the calculation switches between adding another waiting period or burning through all pellets before reaching the waiting period.

Does this integration make your life easier? Please consider a donation.

2026.2.6-beta

• test ThomasPontoppidan

2026.2.5-beta

• Added forced fan
• Added alert reset
• Moved numbers/switches/buttons within integration for easier overview.
• Changed logic for depletion sensor. Calculations now only uses set delta values instead of learned values when moving between heatlevels/waiting.

Does this integration make your life easier? Please consider a donation.

2026.2.4

• Improved local connection handling. Updated logic and more retries to avoid loosing connection.
• Added pellets depletion sensor 🎉 WHAAT!?
  - It's a sensor that calculates when the stove is running out of pellets (or auto shut down, if activated).
  - Add an external (outside) temperature sensor and a hourly weather forecast sensor to enable the best precision in the calculation.
  - The integration saves consumption, heating rates, cooling rates etc for your stove on file and uses it for calculation.
  - More info in README

Does this integration make your life easier? Please consider a donation.

2026.2.3-beta

• Improved local connection handling. Updated logic and more retries to avoid loosing connection.
• Added pellets depletion sensor 🎉 WHAAT!?
  - It's a sensor that calculates when the stove is running out of pellets.
  - Add an external temperature sensor and a hourly weather forecast sensor to enable the best precision in the calculation.
  - The integration saves consumption, heating rates, cooling rates etc for your stove on file and uses it for calculation.
  - More info in README

Does this integration make your life easier? Please consider a donation.

2026.1.3

• Corrected sensor translations.

Would you like to support the development of this integration? Please consider a donation.