Issues

• No Trigger on probe after full movement after updating firmware to 4.13.15

  QIDITECH/QIDI_MAX3#86 · Filter by author Knewman34 opened on Feb 11, 2026

• xindi process overheating issue

  QIDITECH/QIDI_MAX3#83 · Filter by author coderm4ster opened on Aug 31, 2025

• Issue after updating X-max 3 firmware to 4.3.15

  QIDITECH/QIDI_MAX3#82 · Filter by author stevek1026 opened on Jun 14, 2025
  1

• Filament Load and Unload button both runs the same gcode macro

  QIDITECH/QIDI_MAX3#81 · Filter by author ongpujun opened on Apr 26, 2025

• THE SYSTEM START ABNORMALLY after firmware update.

  QIDITECH/QIDI_MAX3#80 · Filter by author mauser348 opened on Apr 5, 2025
  3

• Problem after update firmware 4.3.15 with my QIDI X-MAX 3 i got " THE SYSTEM START ABNORMALLY "

  QIDITECH/QIDI_MAX3#79 · Filter by author Liorkatz opened on Mar 30, 2025
  6

• Problem after net firmware installed

  QIDITECH/QIDI_MAX3#77 · Filter by author Mighty-boop opened on Feb 15, 2025
  2

• V4.3.15 no "QD_Update" file

  QIDITECH/QIDI_MAX3#76 · Filter by author Tweiss75 opened on Feb 10, 2025
  3

• Where is z-offset stored

  QIDITECH/QIDI_MAX3#74 · Filter by author richardklingler opened on Jan 29, 2025
  6

• Re-write MotherBoard

  QIDITECH/QIDI_MAX3#72 · Filter by author Ferropluss opened on Jan 19, 2025
  7

• #61 and #68 does not help me

  QIDITECH/QIDI_MAX3#70 · Filter by author WhatFreshHellAwaits opened on Dec 13, 2024
  11

• Cannot get 4.3.15 to extract, catastrophic failure each time, detecting virus.

  QIDITECH/QIDI_MAX3#68 · Filter by author Bloodybooger opened on Nov 23, 2024
  1

• White screen data error

  QIDITECH/QIDI_MAX3#66 · Filter by author capnkirk643 opened on Nov 10, 2024
  7

• thumbnails in the list

  QIDITECH/QIDI_MAX3#65 · Filter by author Eric-le14 opened on Nov 4, 2024
  2

• Max3_V4.3.15 wiped out TimeLapse functionality

  QIDITECH/QIDI_MAX3#62 · Filter by author leckert123 opened on Oct 4, 2024
  3

• Max3 4.3.15 - virus detected Misleading:Linux/FRP.B!MTB

  QIDITECH/QIDI_MAX3#61 · Filter by author trancified opened on Sep 29, 2024
  7

• Update Request: Debian Buster EOL Reached on Qidi XMAX3 Printer

  QIDITECH/QIDI_MAX3#58 · Filter by author justnx opened on Jul 28, 2024
  6

• Shut off printer

  QIDITECH/QIDI_MAX3#57 · Filter by author pigu36 opened on Jul 20, 2024
  2

• Wired connection between printer and PC in offline environment

  QIDITECH/QIDI_MAX3#56 · Filter by author Koganryu opened on Jul 15, 2024
  1

• Filament Break Detection not saving "ON".

  QIDITECH/QIDI_MAX3#52 · Filter by author r00tdownx opened on May 24, 2024
  4

• Z axis Home at X0 Y0? (resume feature)?

  QIDITECH/QIDI_MAX3#51 · Filter by author r00tdownx opened on May 23, 2024
  2

• Fill Gaps on First Layer

  QIDITECH/QIDI_MAX3#50 · Filter by author r00tdownx opened on May 23, 2024
  4

• Update disable stop motion

  QIDITECH/QIDI_MAX3#49 · Filter by author Booldegum opened on May 15, 2024
  1

• Wiki to revert klipper/moonraker after updating

  QIDITECH/QIDI_MAX3#48 · Filter by author billkenney opened on May 13, 2024
  4

• Reflashing Toolhead from 0.12 to stock

  QIDITECH/QIDI_MAX3#47 · Filter by author leadustin opened on May 7, 2024
  34