Heltec wireless stick v3 verbindet nicht

[SMLunchen]

hallo, hab einen bug, wenn ich per serial mit einem wireless stick lite v3 verbinden will:

Firmware: latest stable 2.7.26.54e0s8d beta

[2026-07-19 16:24:27.832] Serial debug disabled
[2026-07-19 16:24:27.833] Device debug logging disabled
[2026-07-19 16:24:28.016] UpdateMyPositionPin: label='Ich' lat=50,900000, lon=9,500000
[2026-07-19 16:25:37.904] Settings saved to C:\Users\kaleun\Documents\Meshtastic\meshhessen-client.ini
[2026-07-19 16:25:37.904] Serial debug enabled
[2026-07-19 16:25:37.904] Device debug logging enabled
[2026-07-19 16:25:48.229] [SERIAL] Disconnecting...
[2026-07-19 16:25:48.229] [SERIAL] Disconnected
[2026-07-19 16:25:48.233] [SERIAL] Connecting to COM3...
[2026-07-19 16:25:48.332] [SERIAL] Connected to COM3
[2026-07-19 16:25:48.341] Settings saved to C:\Users\kaleun\Documents\Meshtastic\meshhessen-client.ini
[2026-07-19 16:25:48.362] === Initializing ===
[2026-07-19 16:25:48.363] Cleared all data from previous session
[2026-07-19 16:25:48.364] Cleared receive buffer
[2026-07-19 16:25:49.373] Sending wakeup sequence...
[2026-07-19 16:25:50.005] Requesting config...
[2026-07-19 16:25:50.008] Sending WantConfigId request (ID=182252712)...
[2026-07-19 16:25:50.135] WantConfigId sent successfully
[2026-07-19 16:25:50.135] Waiting for config_complete (max 15s)...
[2026-07-19 16:26:06.744] WARNING: config_complete NOT received within 15 seconds!
[2026-07-19 16:26:06.744] Waiting for data stream to finish...
[2026-07-19 16:26:09.797] Data stream stable for 3s (0 nodes)
[2026-07-19 16:26:09.802] Init complete: 0 nodes, 0 channels
[2026-07-19 16:26:09.802] WARNING: NO channels received during init!